AZ699-1C-12DEA

AZ699 SENSITIVE SUBMINIATURE RELAY FEATURES • • • • • • • • • • Extremely small (5mm) 6 Amp switching capability High sensitivity, 83 mW pickup Dielectric strength 4000 Vrms contact to coil Coils up to 48 VDC Epoxy sealed Clearance greater than 6 mm Creepage greater than 8 mm UL, CUR file E43203 VDE file 40000296 GENERAL DATA SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 150 W or 1500 VA Max. switched current: 6 A Max. switched voltage: 300 VDC* or 400 VAC * Note: If switching voltage is greater than 30 VDC, CONTACTS Arrangement Ratings Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 X 107 operations 1 X 105 at 5 A, 250 VAC 5 ms at nominal coil voltage 3 ms at nominal coil voltage (with no coil suppression) special precautions must be taken. Please contact the factory. Rated Load UL, CUR VDE Material Resistance Dielectric Strength 1000 Vrms between open contacts (at sea level for 1 min.) 4000 Vrms contact to coil 6000 V surge, contact to coil Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration 100 megohms min. at 20°C, 500 VDC, 50% RH Greater than 5% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 85°C (158°F) -40°C (-40°F) to 105°C (221°F) 5 g at 10–500 Hz 10 g P.B.T. polyester 94V-0 Tinned copper alloy, P.C. 260°C (500°F) 5 seconds 80°C (176°F) 30 seconds 6 grams 20 per plastic tube / 1000 per carton box 6 A at 250 VAC resistive 6 A at 250 VAC resistive Silver tin oxide, gold plating available < 100 milliohms initially (AgSnO2) < 30 milliohms initially (AgSnO2, gold plated) COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 83 mW 0.9 W at 20°C (68°F) ambient 20°C (36°F) at nominal coil voltage Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. 105°C (221°F) Max. Immersion Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Minimum permissible contact load: AgSnO2 contact: 100 mA at 12 VDC AgSnO2 contact with gold plating: 10 mA at 5 VDC 4. Specifications subject to change without notice. Packing unit in pcs ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-08-11 Junkersstrasse 3, D-82178 Puchheim, Germany AZ699 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 5 12 24 Must Operate VDC 3.5 8.4 16.8 Max. Continuous VDC 11.2 26.8 53.7 Coil Resistance Ôhm ± 10% 147 848 3,390 AgSnO2 Contact AZ699–1C–5DE AZ699–1C–12DE AZ699–1C–24DE ORDER NUMBER* AgSnO2 with Gold Plated Contact AZ699–1C–5DEA AZ699–1C–12DEA AZ699–1C–24DEA 48 33.6 100.0 10,600 (±15%) AZ699–1C–48DE AZ699–1C–48DEA *Substitute “1A” for “1C” to indicate 1 Form A contacts. Add suffix “H” at the end of order number for horizontal mounting. MECHANICAL DATA PC BOARD LAYOUT 1.102 [28.0] .197 [5.0] .148 [3.75] .591 [15.0] .020 [0.5] 2 x ø .039 [ø 1.0] 5 x .138 [3.5] 2 x .018 [0.45] 3 x .039 [1.0] 5 x .018 [0.45] .466 [11.34] .197 [5.0] .197 [5.0] .075 [1.9] .075 [1.9] .602 [15.3] .047 [1.2] 3 x ø .051 [ø 1.3] Vertical Mount Vertical Mount Horizontal Mount Note: Mounting hole diameters and center to center dimensions are the same for both vertical and horizontal mounting version 1.102 [28.0] .050 [1.26] .610 [15.5] .591 [15.0] WIRING DIAGRAM .197 [5.0] Form A 12 4 5 12 Form A 4 5 5 x .118 [3.0] 2X .018 [0.45] 3 x .039 [1.0] 5 x .018 [0.45] Form C 12 12 3 4 5 Form C 3 4 5 Horizontal Mount Vertical Mount Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" Horizontal Mount ZETTLER electronics GmbH Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2004-08-11 Junkersstrasse 3, D-82178 Puchheim, Germany