BT11605

BATRON 5 mm Character Height LCD Modules 25 BT 11605 1 Line x 16 Characters Dimensions [mm] I MECHANICAL DATA Parameter Outline Dimensions Effective viewing area Dot Size Dot Pitch Character Matrix Character Size Character Pitch Weight Width x Height x Depth 80 x 36 x 10 (with LED: 13) 64.5 x 13.8 0.55 x 0.70 0.65 x 0.80 5 x 10 (7+ 3) 3.15 x 5.50 3.7 Approximate 35 (with LED: 45) Unit mm mm mm mm dots mm mm g 6 7 to 14 15 Min. 0 0 VSS Max. 7.0 13.5 VDD Unit V V V °C °C 16 E DB0 to DB7 +VLED -VLED Dot Size I PIN TABLE Pin 1 2 3 4 5 SymbOl VSS VDD V0 RS R/W Signal Description GND (0 V) Power Supply (5 V) Supply Voltage (LCD Driver) Register Select -LOW = Instruction, High = Data Read / Write LOW = MPU to LCM, HIGH = LCM to MPU Enable R / W = LOW: Data are taking over at falling edge of E R / W = HIGH: Data can be read at E = 1 Data Bus - Software selectable 4 or 8 Bit Mode Anode of LED Unit Cathode of LED Unit I ABSOLUTE MAXIMUM RATINGS Parameter Supply Voltage (Logic) Supply Voltage (LCD Driver) Input Voltage Operating Temperature Storage Temperature Symbol VDD (VDD-VSS) VEE(VDD-V0) VI TOP TST I ADDITIONAL INFORMATION N Display Connector Type - without LED: 1 x 14 pin N Display Connector Type - with LED: 1 x 16 pin N Controller Type - SPLC 780 (1) or compatible See Page 11 See Page11 I ELECTRICAL CHARACTERISTICS Condition: Ta = 25°C, VDD = 5.0± 0.25 V Parameter Input Voltage HIGH Input Voltage LOW Output Voltage HIGH Output Voltage LOW Supply Current (Logic) Supply Current (LCD Driver) Duty Ratio Symbol VINH VINL VOH VOL IDD I0 --Min. 2.2 --2.4 --------Typ --------1.0 0.5 1 / 11 Max. --0.6 --0.4 ------Unit V V V V mA mA --- I BLOCK DIAGRAM I LED BACKLIGHT (STANDARD COLOR GREEN) Parameter Supply Voltage Supply Current Lamp Style LED Segments Symbol VF IF[at 25°C] ----Min. 3.8 ------Typ 4.1 30 01 4 Max. 4.2 40 ----Unit V mA --pcs Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 – www.data-modul.de Character LCD Modules