NFS40-7615

NFS40 and NFN40 SERIES Single and triple output • • • • • • • • 5.0 x 3.0 x 1.2 inch package (1U applications) Industry standard package Overvoltage and short circuit protection 40W with free air convection Fixed frequency operation (NFN Series) NFS40: EN55022, EN55011 conducted emissions level A NFN40: EN55022, EN55011 conducted emissions level B UL, VDE and CSA safety approvals [ 2 YEAR WARRANTY ] The NFS40 and NFN40 are industry standard 40 Watt power supplies with the capability to supply 50W in a forced air ambient and to automatically operate from any voltage between 85VAC and 264VAC. Use of MOSFET based switching circuits allows for enhanced features such as output regulation down to zero load (NFN40). Universal input voltage eliminates the need to change jumpers or switch settings to cater for different or widely varying line voltages. In addition to the input voltage range, VDE, UL, CSA, EN60950 and IEC950 approvals make the NFS40 and NFN40 ideal for use in equipment installed throughout the world. The fixed frequency operation of the NFN40 further reduces emissions below VDE class B and significantly reduces leakage current. These low profile switchers with high power density are intended for use in small, digital systems. SPECIFICATION OUTPUT SPECIFICATIONS Output voltage adjustability Line regulation LL to HL, FL Total regulation FL to NL Transient response All specifications are typical at nominal input, full load at 25°C unless otherwise stated GENERAL SPECIFICATIONS ±5.0% ±5.0% ±0.2% ±1.0% ±2.0% ±5.0% Switching frequency ±120mV max. dev. 500µs recovery ±0.02%/°C 125% ±15% Vout Weight 280g (9.88oz) MIL-HDBK-217E 170,000 hours 90W input power limit Continuous Short term MTBF (See Note 9) Approvals and standards (See Note 13) Hold-up time Efficiency Isolation voltage Input/output Input/chassis NFS NFN 110VAC, 40 Watts 230VAC, 40 Watts 14ms 110ms 70% typical 3000VAC 1500VAC Variable Fixed, 45kHz ±5kHz VDE0805, EN60950 IEC950, IEC1010, UL1950 CSA C22.2 No. 950 +5V output on triples Vout on singles Main output Auxiliary outputs Main output Auxiliary outputs +5V (1.5A to 3A) Temperature coefficient All outputs Overvoltage protection Output power limit Short circuit protection +5V output Primary power limited Single outputs Multiple outputs ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Notes 8, 10) Operating 0°C to +70°C Non-operating –40°C to +85°C 50°C ambient temp., 40W Convection cooled Forced air cooling 50W @ 20CFM 50°C to 70°C ambient Derate linearly to 50% load Peak (60 seconds) 60W Non-condensing Operating Non-operating 5% to 80% RH 10,000 feet max. 40,000 feet max. 2.4G rms peak INPUT SPECIFICATIONS Input voltage range Input frequency range Max. input surge current Safety ground leakage current 132VAC, cold start 264VAC, cold start NFS: 110VAC, 60Hz 230VAC, 50Hz NFN: 132VAC, 60Hz 240VAC, 50Hz Universal input 85 to 264VAC 120 to 370VDC 47 to 440Hz 12A max. 24A max. 0.13mA 0.32mA 155µA 261µA max. max. max. max. Relative humidity Altitude EMC CHARACTERISTICS Conducted emissions Conducted emissions Radiated emissions ESD air ESD contact Surge Fast transients Radiated immunity Conducted immunity EN55022 (NFS), FCC part 15 EN55022 (NFN), FCC part 15 EN55022 (NFS and NFN) EN61000-4-2, level 3 Perf. EN61000-4-2, level 4 Perf. EN61000-4-5, level 3 Perf. EN61000-4-4, level 3 Perf. EN61000-4-3, level 3 Perf. EN61000-4-6, level 3 Perf. Level A Level B Level A criteria 1 criteria 1 criteria 1 criteria 1 criteria 2 criteria 2 Vibration (See Note 11) 5Hz to 500Hz, PAGE 24 LOW TO MEDIUM POWER AC/DC POWER SUPPLIES | 40-50W AC/DC 40 to 50 Watt AC/DC universal input switch mode power supplies OUTPUT VOLTAGE +5.1V (A) +12.0V (B) –12.0V (C) +5.1V (A) +12.0V (B) –12.0V (C) +5.1V (A) +12.0V (B) –5.0V (C) +5.1V (A) +15.0V (B) –15.0V (C) +5.1V +12.0V +15.0V +24.0V OUTPUT CURRENTS MAX 3A 2A 0.35A 4A 0.35A 0.35A 3A 2A 0.35A 3A 2A 0.35A 6A 3.3A 2.6A 1.6A (1) PEAK 7A 3A 1A 7A 1A 1A 7A 3A 1A 7A 2.5A 1A 12A 5A 4A 2.5A (2) FAN 5A 2A (3) RIPPLE 50mV (4) TOTAL REGULATION ±2.0% ±5.0% ±5.0% ±2.0% ±5.0% ±5.0% ±2.0% ±5.0% ±5.0% ±2.0% (5) MODEL NUMBER NFS40-7608 (5,6) (D) NFN40-7608 (5,6) 120mV 120mV 50mV 120mV 120mV 50mV 120mV 50mV 50mV 150mV 150mV 100mV 120mV 150mV 240mV 8 0.5A 5A 0.5A 0.5A 5A 2A 0.5A 5A 2A 0.5A 8A 4A 3.3A 2A NFS40-7628 (12) NFN40-7628 (12) 1 NFS40-7607 (5,6) NFN40-7607 (5,6) NFS40-7610 (5,6) NFN40-7610 (5,6) +10.0%/–3.0% ±5.0% ±2.0% ±2.0% ±2.0% ±2.0% NFS40-7605 NFS40-7612 NFS40-7615 NFS40-7624 NFN40-7605 NFN40-7612 NFN40-7615 NFN40-7624 Notes 1 2 Natural convection cooled, 40W maximum. Peak output current lasting less than 30 seconds with duty cycle less than 10%. During peak loading, outputs may go outside of total regulation limits. Peak total power must not exceed 60W. Forced air, 20 CFM at 1 atmosphere, 50W maximum. Figure is peak-to-peak. Output noise is measured across a 50MHz bandwidth using a 12 inch twisted pair, terminated with a 47µF capacitor. Total regulation is defined as the static output regulation at 25°C, including initial tolerance, line voltage within stated limits, load currents within stated limits, and output voltages adjusted to their factory settings. Also, 0.25