CSE2450

Series CS 10-90Amp • 120/240 Vac • AC OUTPUT • Low Leakage • SCR Output • Panel Mount • Zer Voltage Switching Zero The Series CS has an SCR AC switch output featuring low off-state leakage (1mA, snubberless), zero-voltage switching and a broadened operating range (24-280Vac). This wide range permits optimum performance at both 120Vac and 240Vac line voltages. Manufactured in Crydom’s ISO 9001 Certified facility for optimum product performance and reliability. MODEL NUMBERS CSD2410 CSE2410 CSD2425 CSE2425 CSD2450 CSE2450 CSD2475 CSE2475 CSD2490 CSE2490 OUTPUT SPECIFICATION S ➀ Operating Voltage (47-63 Hz) [Vrms] Load Current Range 24-280 0.15-10 600 120 1.6 1.48 60 1.0 500 1/2 Cycle 1/2 Cycle 0.5 24-280 0.15-25 600 250 1.6 1.02 260 1.0 500 1/2 Cycle 1/2 Cycle 0.5 24-280 0.15-50 600 625 1.6 0.63 1620 1.0 500 1/2 Cycle 1/2 Cycle 0.5 24-280 0.25-75 600 1000 1.6 0.31 4150 1.0 500 1/2 Cycle 1/2 Cycle 0.5 24-280 0.25-90 600 1200 1.6 0.28 6000 1.0 500 1/2 Cycle 1/2 Cycle 0.5 ➂ [Arms] Transient Overvoltage [Vpk] Max. Surge Current, (16.6ms) [Apk] Max. On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case (RθJC ) [˚C/W] Maximum I 2 t for Fusing, (8.3 msec.) [A 2sec] Max. Off-State Leakage Current @ Rated Voltage [mA] Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] Max. Turn-On Time Max. Turn-Off Time Power Factor (Min.) with Max. Load ➁ INPUT SPECIFICATIONS➀ Control Voltage Range Max. Turn-On Voltage Min. Turn-Off Voltage Nominal Input Impedence Typical Input Current D C CONTROL ( CSD PREFIX) DC CONTROL (CSE PREFIX) 3.5-15 Vdc 3.5 Vdc 1.0 Vdc 300 Ohm 15 mA @ 5 Vdc 15-32 Vdc 15.0 Vdc 1.0 Vdc 2k Ohm 7mA @ 15 V GENERAL NOTES © 2001 CRYDOM CORP, Specifications subject to change without notice. ➀ ➁ ➂ All parameters at 25ºC unless otherwise specified. Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Heat sinking required, for derating curves see page 2. FastFax Document No.162 SERIES CS. Rev. 012402 PAGE 1 OF 3 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 Series CS 10-90Amp • 120/240 Vac • AC OUTPUT GENERAL SPECIFICATIONS Dielectric Strength 50/60Hz , Input/Output/Base Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range MECHANICAL SPECIFICATIONS Weight: (typical) Encapsulation: Terminals: AVAILA BLE OPTIONS 4000 Vrms 109 Ohm 10 pF -40 to 80˚C -40 to 125˚C 3.0 oz. (86.5g) Thermally Conductive Epoxy Screws and Saddle Clamps Furnished, Unmounted MOUNTING HOLE/SLOT 0.17 (4.3) DIA. 1.10 (27.9) .45 (11.4) 8-32 TERMINAL (2 PLACES ) F Faston Terminals (Up to 50A Models) Example: CSD2425F 1.87 (47.5) 1 OUTPUT 2 SOLID-STATE RELAY G Input Status LED. Agencies Approval Pending Example: CSD2425G Note: Control Voltage Range 5-15Vdc for CSD Models. Internal Overvoltage Protection. Relay Will Self Trigger Between 450-600 Vpk. Not Suitable For Capacitive Loads. Agencies Approval Pending. Example: CSD2425P Random Turn-On (AC & DC Control) Phase Controllable (DC Control) Example: CSD2425-10 -4 INPUT + 3 2.30 (58.4) 1.70 (43.2) BASE PLATE .125 (3.2) P 1.00 (25.4) 1.80 (45.7) 6-32 TERMINAL (2 PLACES) .78 (19.8) .90 (22.9) -10 MOUNTING HOLE/SLOT 0.17 (4.3) DIA. 1.10 (27.9) .45 (11.4) FASTON TERMINAL .250 X .032 (2 PLCS.) .87 REF. (22.2) Screw Torque Requirements: 6-32 Screws - 10 in./lbs., 8-32 and 10-32 Screws - 20in./lbs. (Screws dry without grease.) Fastons: Single pair (up to 25A) Double pair* (up to 50A). * Caution: User must connect to both pairs 1.87 (47.5) 1 OUTPUT 2 2.30 (58.4) 1.70 (43.2) SOLID-STATE RELAY -4 INPUT + 3 Crydom Heat Sinks offer excellent thermal management and are perfectly matched to the load current ratings of Crydom panel mount relays. Request Crydom’s Heat Sink specification sheet for all the details. BASE PLATE .125 (3.2) 1.00 (25.4) 1.80 (45.7) FASTON TERMINAL .187 X .032 (2 PLCS.) .78 (19.8) .90 (22.9) All dimensions are in inches (millimeters) APPROVALS UL E116949 CSA LR81689 VDE 10143 UG FastFax Document No.162 SERIES CS. Rev. 012402 PAGE 2 OF 3 © 2001 CRYDOM CORP, Specifications subject to change without notice. For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 Series CS 10-90Amp • 120/240 Vac • AC OUTPUT CU RRENT DERATING CURVES 10A 12 7˚C/W 9˚C/W 3˚C/W 25A 30 1˚C/W 95 Base Plate Temp [˚C] Base Plate Temp [˚C] 5˚C/W Base Plate Temp [˚C] 110 25 Power Dissipation 3˚C/W 2˚C/W 100 Power Dissipation 8 115 NO HEATSINK 20 15 10 NO HEATSINK 110 4 120 5 0 2 4 6 8 10 20 40 60 80 Load Current [Arms] Max Ambient Temp. [˚C] 120 5 10 15 20 25 20 40 60 80 0 Load Current [Arms] Max Ambient Temp. [˚C] 50A 60 1˚C/W 1.5˚C/W .5˚C/W 75A 120 90 Base Plate Temp [˚C] Base Plate Temp [˚C] 90A 120 .5˚C/W .2˚C/W .4˚C/W 90 95 Power Dissipation .5˚C/W .3˚C/W Power Dissipation Power Power Dissipation 40 2˚C/W 100 80 1˚C/W 100 Power Dissipation 80 1ºC/W 100 20 NO HEATSINK 110 110 40 120 0 110 40 120 0 20 40 60 80 0 20 40 60 80 120 80 15 30 45 60 75 20 40 60 80 0 10 20 30 40 50 20 40 60 Load Current [Arms] Max Ambient Temp. [˚C] Load Current [Arms] Max Ambient Temp. [˚C] Load Current [Arms] Max Ambient Temp. [˚C] © 2001 CRYDOM CORP, Specifications subject to change without notice. FastFax Document No.162 SERIES CS. Rev. 012402 PAGE 3 OF 3 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506