LLW51570

Technical Data Sheet 5mm Round LED,T-1 3/4 Features ◆Popular T-1 3/4 diameter package ◆Choice of various viewing angles ◆Viewing angle=15° ◆ Reliable and robust Descriptions ◆The series is specially designed for applications requiring higher brightness ◆The LED lamps are available with different colors, intensities , epoxy colors , etc. Applications ◆ ◆ ◆ ◆ TV set Monitor Telephone Computer Part NO. LLW51570 Material lnGaN Lens Color Water Clear Source Color White Package Dimension: Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(.010”)mm unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04”) max 4. Specifications are subject to change without notice. 5. Caution in ESD: Siatic Electricity and surge damages the LED. lt is recommend to use a wrist band or anti-electrostatic glove when handling the LED.All devices, equipment and machinery must be properly grounded. Absolute Maximum Ratings at Ta=25℃ Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current Electrostatic Discharge(ESD) Reverse Voltage Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [4mm(.157”) From Body] MAX. 100 100 35 150 5 -40℃ to +80℃ -40℃ to +100℃ 260℃ for 5 Seconds Unit mW mA mA V V Electrical Optical Characteristics at Ta=25℃ Parameter Luminous Intensity Viewing Angle x= X Re d = X + Y + Z Re d + Green + Blue Symbol Iv 2θ1/2 x y VF IR Min. 4000 ------3.0 --- Typ. 5000 15 0.30 0.31 3.6 --- Max. 7000 -----4.0 10 Unit mcd Deg ----V µA Test Condition If=20mA (Note 1) (Note 2) IF=20mA (Note 3) IF=20mA (Note 3) IF=20mA VR=5V y= Green Y = X + Y + Z Re d + Green + Blue Forward Voltage Reverse Current Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. It use many parameters that correspond to the CIE 1931 2°. X,Y, and Z are CIE 1931 2° values of Red, Green and Blue content of the measurement. ◆Chromaticity Coordinates Specifications for Bin Grading Rank A B C D *Tolerance x y x y x y x y Chromaticity Coordinates 0.22 0.22 0.26 0.25 0.29 0.27 0.32 0.29 x±0.02 0.22 0.28 0.26 0.31 0.29 0.33 0.32 0.35 0.26 0.31 0.29 0.33 0.32 0.35 0.36 0.38 y±0.02 0.26 0.25 0.29 0.27 0.32 0.29 0.36 0.32 ◆CIE Chromaticity Diagram Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted)