MHP20500J

20W TO-220 HIGH POWER RESISTORS Features…………………………………………………………. Non-inductive. Thermally enhanced Industry standard TO220 package. RoHS compliant. Low thermal resistance, 5.9 °C/W resistor hot spot to metal tab. Complete thermal flow design available for easy implementation. Superior vibration durability. Small thin package for high density PCB installation. Applications……………………………………………………… High frequency circuits and high speed pulse designs. Switch mode power supplies. Motor control and drive circuits. Automotive. Industrial computing and measurement systems. Specification Dimensions A C D dia.M MHP J G F E H N A 10.6 B 15.0 C 4.5 D 1.5 E 2.7 F 5.08 B K L G 0.75 H 0.5 J 1.5 K 19.0 L 2.7 M 3.6 N 15.0 Specification Item Power Rating Power Rating Thermal Resistance Resistance Range Nominal Resistance Series TCR Tolerance Operation Temp. Range Max. Operating Volt. Dielectric Withstanding Voltage Load Life Humidity Temp. Cycle Soldering Heat Solder ability Insulation Resistance Vibration . Specifications 20 Watts 2.25 Watts 5.9 °C/W 0.1-9.1 Ω E12 100 ppm/°C 5% (J) -55°C to+155°C 500V or P.R 2000 Volts AC ∆R +/-(1.0 %+0.05 Ω) ∆R +/- (1.0 %+0.05 Ω) ∆R +/- (0.25 %+0.05 Ω) ∆R +/- (0.1 %+0.05 Ω) Over 95% of surface Over 1,000 MΩ ∆R +/- (0.25 %+0.05 Ω) Test Conditions -55 to 25 °C flange temperature Free air. Hot spot to Tab Up to 51 KΩ also available 2.5 Ω and 5.0 Ω also available -55 to +155 °C 0.01-0.09 Ω E6 250 ppm/°C +/- 5% (J) 10-220 Ω E24 50 ppm/°C +/-1% (F) 60 seconds. 25 °C, 90 min. ON,30 min. OFF,1000 hours. 40°C,90-95%RH, DC 0.1 W, 1000 hours. -55 °C,30 min.,+155 °C,30 min., 5 cycles 250+/-5 °C, 3 seconds, 230+/-5 °C, 3 seconds. Between terminals and tab. Specifications subject to change without notice 1 MHP 20 20W TO-220 High power resistors Temperature Rise(°C) 140 120 +25C 100 80 60 40 20 +155C 0 0 10 20 MHP 20 500 F Power (Watts) Derating Curve Temperature Rise 20 15 10 5 0 -50 0 50 100 150 200 Flange Temperature (C°) Power (Watts) Pulse Energy Durability Pulse Peak (Watts), 10K MHP 20 100F Frequency Characteristics Impedance (ohms) 10K MHP 20 10K0 F MHP 20 1K0 F 1K 1K MHP 20 101 F 100 100 MHP 20 500 F 10 10 1µ 10µ 100µ 1m Pulse With (seconds) 10m 100m 1G MHP 20 220F 10K 100K 1M 10M 100M Notes: (1) (2) (3) (4) (5) Electrically isolated metal tab. Recommend the use of thermal grease between metal tab and heat sink. Thermal design should account for a thermal resistance between resistor and tab of 5.9°C/W and a maximum resistor temperature of 155°C. Current rating: 25A maximum. Surface mount package also available, please call factory. Ordering Information MHP 20 500 F Model Resistance Code 0.1Ω : 0R100 50 Ω : 500 First two digits significant, last digit: number of trailing zeros Tolerance J = 5% Tol F = 1% Tol 2