ASD35-5D12

5 V I np u t 3 WAT T Modular DC/DC Converters 24-Pin DIP Package 5 Volt Input 500 or 1500V Isolation Short Circuit Protection High Efficiency Input PI Filter Unit measures 0.8”W x 1.25”L x 0.4”H ASD35 series Model Number SINGLE OUTPUT ASD35-5S3(H or M)* ASD35-5S5(H or M)* ASD35-5S12(H or M)* ASD35-5S15(H or M)* DUAL OUTPUT ASD35-5D5(H or M)* ASD35-5D12(H or M)* ASD35-5D15(H or M)* Output Voltage Output mAmps Input Range Efficiency “H” versions only 3.3 VDC 5 VDC 12 VDC 15 VDC +/-5 VDC +/-12 VDC +/-15 VDC 600 600 250 200 +/-300 +/-125 +/-100 4.5-6.0 VDC 4.5-6.0 VDC 4.5-6.0 VDC 4.5-6.0 VDC 4.5-6.0 VDC 4.5-6.0 VDC 4.5-6.0 VDC 64.00% 70.00% 75.00% 75.00% 70.00% 75.00% 75.00% * Specifying “H” or “M” designates a choice of Pinouts (Please see Mechanical Specifications) and a choice of 500VDC Isolation (“M” Version) or 1500VDC Isolation (“H” Version). Order On-Line! WWW.ASTRODYNE.COM astrodyne.com 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 5 V I np u t 3 WAT T Modular DC/DC Converters INPUT SPECIFICATIONS Input Voltage Nominal Input Voltage Range: Input Filter 5 VDC 4.5-6.0 VDC PI Type ASD35 GENERAL SPECIFICATIONS Input-Output Isolation Isolation Resistance Switching Frequency Safety series OUTPUT SPECIFICATIONS Voltage and Current Load Regulation Line Regulation Temperature Coefficient Ripple/Noise(Single/Dual) Voltage Accuracy Voltage Balance Short Circuit Protection Efficiency See Selection Chart Single (10% to FL) +/- 0.5% Dual (25% to FL) +/-1% (HL-LL) +/- 0.5% +/-0.05%/°C 3.3V/5V 100mVp-p max. 12V/15V 1% p-p max. +/- 2% (Dual) +/- 1% Continuous See Selection Chart 500VDC (“M” Versions) 1500VDC (“H” Versions) 10-9nth Ohm min. 100Khz UL60950 - “H” Versions Only ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Case Temperature Storage Temperature Cooling MTBF -25 to +71°C 100°C max. -40 to +100°C * Free Air Convection Single O/P 1,249,000 Hrs. Dual O/P 1,186,000 Hrs. MIL-HDBK-217F Ground Benign, 25°C PHYSICAL SPECIFICATIONS Case Material Construction Weight Dimensions Black coated Copper w. Non-conductive base Fully Encapsulated 0.5 oz, (13g) 1.25”x0.8”x0.4” All specifications are typical at nominal input, full load, and 25DegC unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 5 V I np u t 3 WAT T Modular DC/DC Converters MECHANICAL DIMENSIONS “M” Version Pin # 1 2 3 9 10 11 12 13 14 15 16 22 23 24 ASD35 “H” Version Single Dual No Pin -Input -Input NC NC NC No Pin No Pin +Output NC -Output +Input +Input No Pin No Pin -Input -Input Common NC -Output No Pin No Pin +Output NC Common +Input +Input No Pin series Single +Input NC NC No Pin -Output +Output -Input -Input +Output -Output No Pin NC NC +Input Dual +Input -Output Common No Pin Common +Output -Input -Input +Output Common No Pin Common -Output +Input NOTE: Pin Size is 0.02” Inch (0.5mm) DIA All Dimensions In Inches (mm) Tolerance .xx = +/-0.02, .xxx = +/- 0.010 NC = No Connection with Pin WWW.ASTRODYNE.COM 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181