SP5162

marlow industries inc.® Thermoelectric Cooler Performance Values Hot Side Temperature (°C) ΔTmax (°C-dry N2): Qmax (watts): Imax (amps): Vmax (vdc): AC Resistance (ohms): 27°C 68 2.30 1.60 2.17 1.14 85°C 88.5 2.80 1.50 2.74 --- SP5162 Mechanical Characteristics Ceramic material: Alumina (AC) Ordering Options SP5162-01AC SP5162-04AC hot side exterior is metallized both surfaces are metallized with 183°C For information regarding additional ordering options available, please contact a Marlow engineering representative. Copyright 2002, Marlow Industries, Inc. Marlow Industries reserves the right to change the design and specifications of products without notice. 102-0224, Rev 2 Thermoelectric Cooler Performance Curves Environment: One atmosphere dry nitrogen SP5162 For performance information in a vacuum or with hot side temperatures other than 27°C or 85°C, consult one of our Applications Engineers. Installation Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEC Installation Guide. Operation Cautions For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. Marlow Industries, Inc. 10451 Vista Park Road Dallas Texas 75238-1645 TEL: 214-340-4900 FAX: 214-341-5212 Internet: http://www.marlow.com Marlow Industries Europe Aberdeen House, South Road Haywards Heath West Sussex RH164NG UK TEL: +44 (0)1444-443404 FAX: +44 (0)1444-443334 Marlow Industries Asia 1-1-8-401 Uehara, Shibuya-ku Tokyo, Japan 151-0064 TEL: +81 (3) 5454-5280 FAX: +81 (3) 5454-5281 Copyright 2002, Marlow Industries, Inc. Marlow Industries reserves the right to change the design and specifications of products without notice. 102-0224, Rev 2