FLM1314-3F

FLM1314-3F X, Ku-Band Internally Matched FET FEATURES • • • • • • High Output Power: P1dB = 35.0dBm (Typ.) High Gain: G1dB = 5.5dB (Typ.) High PAE: ηadd = 25% (Typ.) Low IM3 = -45dBc@Po = 24.0dBm Broad Band: 13.75 ~ 14.5GHz Impedance Matched Zin/Zout = 50Ω DESCRIPTION The FLM1314-3F is a power GaAs FET that is internally matched for standard communication bands to provide optimum power and gain in a 50 ohm system. Eudyna’s stringent Quality Assurance Program assures the highest reliability and consistent performance. ABSOLUTE MAXIMUM RATING (Ambient Temperature Ta=25°C) Item Drain-Source Voltage Gate-Source Voltage Total Power Dissipation Storage Temperature Channel Temperature Symbol VDS VGS PT Tstg Tch Tc = 25°C Condition Rating 15 -5 25.0 -65 to +175 175 Unit V V W °C °C Fujitsu recommends the following conditions for the reliable operation of GaAs FETs: 1. The drain-source operating voltage (VDS) should not exceed 10 volts. 2. The forward and reverse gate currents should not exceed 13.0 and -1.4 mA respectively with gate resistance of 100Ω. ELECTRICAL CHARACTERISTICS (Ambient Temperature Ta=25°C) Item Saturated Drain Current Transconductance Pinch-off Voltage Gate Source Breakdown Voltage Output Power at 1dB G.C.P. Power Gain at 1dB G.C.P. Drain Current Power-added Efficiency Gain Flatness 3rd Order Intermodulation Distortion Thermal Resistance Channel Temperature Rise CASE STYLE: IA Symbol IDSS gm Vp VGSO P1dB G1dB Idsr ηadd ∆G IM3 Rth ∆Tch f = 14.5GHz, ∆f = 10 MHz 2-Tone Test Pout = 24.0dBm S.C.L. Channel to Case 10V x Idsr x Rth VDS =10V, IDS = 0.6 IDSS (Typ.), f = 13.75 ~ 14.5 GHz, ZS=ZL= 50 ohm Test Conditions VDS = 5V, VGS = 0V VDS = 5V, IDS = 900mA VDS = 5V, IDS = 70mA IGS = -70µA Min. -0.5 -5.0 34.0 5.0 -42 Limit Typ. Max. 1400 2100 1300 -1.5 35.0 5.5 900 25 -45 5.0 -3.0 1100 ±0.6 6.0 66 Unit mA mS V V dBm dB mA % dB dBc °C/W °C G.C.P.: Gain Compression Point, S.C.L.: Single Carrier Level Edition 1.4 August 2004 1 FLM1314-3F X, Ku-Band Internally Matched FET POWER DERATING CURVE 30 OUTPUT POWER & IM3 vs. INPUT POWER VDS=10V f1 = 14.5 GHz f2 = 14.51 GHz 2-tone test Pout Total Power Dissipation (W) 30 Output Power (S.C.L.) (dBc) 24 28 26 24 22 20 18 18 -15 -25 IM3 -35 -45 -55 6 0 50 100 150 200 Case Temperature (°C) 15 17 19 21 23 Input Power (S.C.L.) (dBm) S.C.L.: Single Carrier Level OUTPUT POWER vs. FREQUENCY VDS = 10V P1dB Pin = 31dBm 29dBm 27dBm OUTPUT POWER vs. INPUT POWER VDS = 10V f = 14.25 GHz 36 36 Output Power (dBm) 34 Pout Output Power (dBm) 35 34 33 32 32 30 26 24 ηadd 20 10 25dBm 31 18 13.7 13.9 14.1 14.3 14.5 20 22 24 26 28 30 32 Input Power (dBm) Frequency (GHz) 2 ηadd (%) 28 IM3 (dBc) 30 12 FLM1314-3F X, Ku-Band Internally Matched FET +j50 +j100 +j25 14.3 13.55 GHz 13.55 GHz 13.7 13.7 13.9 14.1 13.9 14.7 14.1 14.5 13.9 14.3 14.1 14.7 14.5 S11 S22 +90° S21 S12 +j10 +j250 13.7 13.9 0 10 25 14.7 50Ω 14.3 14.1 14.5 14.3 14.5 14.7 180° 13.7 13.55 GHz 13.55 GHz 1 2 3 4 0° SCALE FOR |S21| -j10 -j250 -j25 -j50 -j100 SCALE FOR |S12| 0.1 0.2 -90° FREQUENCY (MHZ) 1355 1360 1365 1370 1375 1380 1385 1390 1395 1400 1405 1410 1415 1420 1425 1430 1435 1440 1445 1450 1455 1460 1465 1470 S11 MAG .522 .503 .485 .461 .440 .418 .394 .370 .344 .322 .299 .275 .255 .235 .220 .205 .195 .190 .190 .193 .199 .212 .223 .245 ANG 60.0 54.7 49.3 43.5 37.4 31.2 24.4 17.6 10.0 2.1 -6.0 -15.0 -24.8 -35.9 -46.3 -58.6 -71.6 -85.3 -98.6 -111.2 -123.6 -135.6 -146.3 -155.5 S-PARAMETERS VDS = 10V, IDS = 900mA S21 S12 MAG ANG MAG ANG 1.928 1.973 2.012 2.044 2.080 2.114 2.145 2.160 2.181 2.187 2.197 2.196 2.193 2.186 2.174 2.152 2.133 2.107 2.081 2.042 2.021 1.984 1.944 1.909 -160.3 -165.0 -169.9 -175.0 179.9 174.5 169.3 163.8 158.3 153.1 147.5 142.0 136.5 130.8 125.4 119.9 114.5 109.0 103.7 98.7 93.4 88.3 83.4 78.2 .071 .079 .083 .087 .090 .096 .102 .105 .109 .115 .120 .123 .126 .128 .132 .133 .137 .138 .139 .139 .140 .141 .139 .138 -179.5 176.8 171.6 165.4 161.9 156.3 150.8 146.9 139.7 136.8 130.8 127.0 121.4 115.3 110.1 104.5 100.3 94.1 89.4 84.0 79.5 74.9 69.1 65.4 S22 MAG .527 .511 .496 .475 .458 .438 .419 .398 .376 .355 .333 .318 .297 .278 .263 .245 .232 .219 .209 .205 .204 .206 .205 .211 ANG 89.5 84.8 79.6 74.6 69.3 63.7 57.5 50.7 44.2 36.7 29.1 21.3 12.3 3.8 -5.8 -16.4 -27.5 -37.7 -49.3 -60.7 -71.8 -83.4 -93.7 -104.6 3 FLM1314-3F X, Ku-Band Internally Matched FET Case Style "IA" Metal-Ceramic Hermetic Package 1.5 Min. (0.059) 1 2-R 1.25±0.15 (0.049) 0.1 (0.004) 4 2 3 0.5 (0.020) 1.5 Min. (0.059) 1.8±0.15 (0.071) 3.2 Max. (0.126) 8.1 (0.319) 0.2 Max. (0.008) 1.15 (0.045) 9.7±0.15 (0.382) 13.0±0.15 (0.512) 16.5±0.15 (0.650) 1. 2. 3. 4. Gate Source (Flange) Drain Source (Flange) Unit: mm(inches) For further information please contact: CAUTION Eudyna Devices Inc. products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Eudyna Devices USA Inc. 2355 Zanker Rd. San Jose, CA 95131-1138, U.S.A. TEL: (408) 232-9500 FAX: (408) 428-9111 www.us.eudyna.com • Do not put this product into the mouth. • Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. • Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Eudyna Devices Europe Ltd. Network House Norreys Drive Maidenhead, Berkshire SL6 4FJ United Kingdom TEL: +44 (0) 1628 504800 FAX: +44 (0) 1628 504888 Eudyna Devices Asia Pte Ltd. Hong Kong Branch Rm. 1101, Ocean Centre, 5 Canton Rd. Tsim Sha Tsui, Kowloon, Hong Kong TEL: +852-2377-0227 FAX: +852-2377-3921 Eudyna Devices Inc. reserves the right to change products and specifications without notice. The information does not convey any license under rights of Eudyna Devices Inc. or others. © 2004 Eudyna Devices USA Inc. Printed in U.S.A. Eudyna Devices Inc. Sales Division 1, Kanai-cho, Sakae-ku Yokohama, 244-0845, Japan TEL: +81-45-853-8156 FAX: +81-45-853-8170 4