BAS12505WE6327HTSA1

BAS125... Silicon Schottky Diodes • For low-loss, fast-recovery, meter protection, bias isolation and clamping application • Integrated diffused guard ring • Low forward voltage • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BAS125-04W BAS125-05W ! ,  BAS125-06W ! ,  ,  BAS125-07W ! ,  ,  " ! ,  ,  ,  ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type BAS125-04W BAS125-05W BAS125-06W BAS125-07W Package SOT323 SOT323 SOT323 SOT343 Configuration series common cathode common anode parallel pair LS(nH) 1.4 1.4 1.4 1.6 Marking 14s 15s 16s 17s Maximum Ratings at TA = 25°C, unless otherwise specified Parameter Symbol Value Diode reverse voltage VR 25 V Forward current IF 100 mA Non-repetitive peak surge forward current I FSM 500 Total power dissipation Ptot mW BAS125-04W, BAS125-06W, TS ≤ 84°C BAS125-05W, T S ≤ 76°C 250 BAS125-07W, T S ≤ 96°C 250 250 Junction temperature Tj Storage temperature T stg 1Pb-containing Unit 150 °C -55 ... 150 package may be available upon special request 1 2007-04-19 BAS125... Thermal Resistance Parameter Symbol Junction - soldering point 1) RthJS Value Unit K/W BAS125-04W, BAS125-06W ≤ 365 BAS125-05W ≤ 295 BAS125-07W ≤ 215 Electrical Characteristics at TA = 25°C, unless otherwise specified Symbol Values Parameter min. typ. Unit max. DC Characteristics Reverse current IR nA VR = 20 V - - 100 VR = 25 V - - 150 Forward voltage mV VF IF = 1 mA - 385 400 IF = 10 mA - 530 650 IF = 35 mA - 800 950 ∆ VF - - 20 CT - - 1.1 pF RF - 15 - Ω Forward voltage matching2) IF = 10 mA AC Characteristics Diode capacitance VR = 0 , f = 1 MHz Differential forward resistance I F = 5 mA, f = 10 kHz 1For calculation of RthJA please refer to Application Note Thermal Resistance 2∆V F is the difference between lowest and highest V F in a multiple diode component. 2 2007-04-19 BAS125... Diode capacitance CT = ƒ (VR) Forward resistance rf = ƒ (I F) f = 10 kHz f = 1MHz 1.0 CT BAS 125... EHD07117 10 4 rf pF BAS 125... EHD07118 Ω 0.8 10 3 0.6 10 2 0.4 10 1 0.2 0.0 0 10 V 10 0 10 -2 20 10 -1 10 0 10 1 mA ΙF VR Reverse current IR = ƒ(VR) Forward current IF = ƒ (VF) TA = Parameter TA = Parameter 10 1 ΙR BAS 125... EHD07116 10 2 ΙF TA = 125 C µA BAS 125... EHD07115 mA 10 1 10 0 TA = 85 C 10 -1 10 0 10 -2 10 -3 10 2 10 -1 TA = 25 C 0 10 TA = -40C 25 C 85 C 150 C V 10 -2 0.0 20 VR 0.5 V 1.0 VF 3 2007-04-19 BAS125... Forward current IF = ƒ (T S) Forward current IF = ƒ (T S) BAS125-04W, BAS125-06W BAS125-05W 120 120 mA mA IF 80 IF 80 60 60 40 40 20 20 0 0 15 30 45 60 75 90 105 120 °C 0 0 150 TS 15 30 45 60 75 90 105 120 °C 150 TS Forward current IF = ƒ (T S) BAS125-07W 120 mA IF 80 60 40 20 0 0 15 30 45 60 75 90 105 120 °C 150 TS 4 2007-04-19 BAS125... Permissible Puls Load RthJS = ƒ (tp) Permissible Pulse Load BAS125-04W, BAS125-06W IFmax / I FDC = ƒ (t p) BAS125-04W, BAS125-06W 10 10 2 3 I Fmax/IFDC RthJS K/W 10 2 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 1 10 0 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 10 0 -7 10 0 10 -6 10 -5 10 -4 10 -3 10 tp -2 s 10 0 tp Permissible Puls Load RthJS = ƒ (tp) Permissible Pulse Load BAS125-05W IFmax / I FDC = ƒ (t p) BAS125-05W 10 1 IFmax/IFDC RthJS 10 3 10 2 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 - 10 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 1 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 5 2007-04-19 Package SOT323 BAS125... Package Outline 0.9 ±0.1 2 ±0.2 0.3 +0.1 -0.05 0.1 MAX. 3x 0.1 M 0.1 A 1 2 1.25 ±0.1 0.1 MIN. 2.1 ±0.1 3 0.15 +0.1 -0.05 0.65 0.65 0.2 M A Foot Print 0.8 1.6 0.6 0.65 0.65 Marking Layout (Example) Manufacturer 2005, June Date code (YM) BCR108W Type code Pin 1 Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 0.2 2.3 8 4 Pin 1 2.15 1.1 6 2007-04-19 Package SOT343 BAS125... Package Outline 0.9 ±0.1 2 ±0.2 0.1 MAX. 1.3 0.1 A 1 2 0.1 MIN. 0.15 1.25 ±0.1 3 2.1 ±0.1 4 0.3 +0.1 -0.05 +0.1 0.15 -0.05 +0.1 0.6 -0.05 4x 0.1 0.2 M M A Foot Print 1.6 0.8 0.6 1.15 0.9 Marking Layout (Example) Manufacturer 2005, June Date code (YM) BGA420 Type code Pin 1 Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 0.2 2.3 8 4 Pin 1 2.15 1.1 7 2007-04-19 BAS125... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 8 2007-04-19