CY8CTMA884LTI-13T

CYPRESS MARKING FORMAT July 2017 Note: The diagrams are provided for illustrative purposes only. Please note that the actual marking format may vary depending on package size, type and pin count. Should you have any other concerns and questions, feel free to contact your local CY sales representative. Markings for costumed parts CS/CG, acquired and buy-in parts are not included on this document. The diagrams below is based on the latest Cypress Marking Spec 37-00001 Rev.. JB LEGEND: 2 July 2017 Rev17 Character Meaning Remarks b Blank Space d Marketing Part Number lll CYP ff Fab Location rr Backend Part Revision yyww Date Code yy = last two digit of the year ww = Workweek nnnnnn Mark Lot Number nnnnnn = First and last five digits of Mark Lot Number nnnn = last four digit of Mark Lot Number xxx Country of Origin C Copper Wire Part ll = CY lllllll = CYPRESS xxxx = COO with “.” at the end Ex. PHI. SOIC 8L Using Gold (Au) Wire dddddddddddd dddddddddd ywwnnnn 1st line (12 characters) is the marketing part number 2nd line (10 characters) is the rest of the marketing part number Using Copper (Cu) Wire dddddddddddd dddddddddddd ywwnnnn c 3rd line (7 characters) is the date code and lot code. 1st line (12 characters) is the marketing part number 2nd line (10 characters) is the rest of the marketing part number 3rd line (7 characters) is the date code and lot code. The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: CY2305SXI-1H . :Line 1: CY2305S Line 2: XI-1H Line 3: 2075794 1. 2. 3. 4. 3 Packages : • SOIC 8 - 150 mils Note: First line to mark the marketing part number before the first S character. 2nd line the rest of the marketing part number. 3rd line ywwnnnn where y= last digit of the year ww= work week nnnn= last four digits of the lot number. If the marketing part number has more than 7 characters before the S than the first 7 characters will print on line 1 with the remaining 7 characters wrapping to line 2. July 2017 Rev17 Reference: 37-00001, Figure 45 SOIC 14L/SOIC 16L Using Gold (Au) Wire dddddddddddddddd dddbyywwbffbrr xxxblllbnnnnnn 1st line (16 characters) is the marketing part number 2nd line (14 characters) is the date code, fab site and backend revision line is the COO, ‘CYP’ and lot code. 3rd 1st line (16 characters) is the marketing part number Using Copper (Cu) Wire dddddddddddddddd dddbyywwbffbrr xxxblllbnnnnnn c 2nd line (14 characters) is the date code, fab site and backend revision 3rd line is the COO, ‘CYP’ and lot code. The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY7C63801-SXC. Line 1: CY7C63801-SXC Line 2: 1307 04 A Line 3: PHI CYP 607050 Note: 1. 2. 3. 4 July 2017 Rev17 If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN separated with a blank then wrap the rrff to the left If BE Part Rev has only one character, use rbff format instead of rrff For Non-MIA devices, mark last four digits of the assembly lot number (nnnn) beside the pin 1 indicator. Packages : • SOIC 14 - 150 mils • SOIC 16 - 150 mils Reference: 37-00001, Figure 33 SOIC 16L/SOIC 18L Using Gold (Au) Wire dddddddddd dddddddddd yywwbrrffb nnnnnnbbbb nnnn Lines 1 – 4: 10 characters per line Line 5: 4 characters Using Copper (Cu) Wire 1st and 2nd line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN separated with a blank then wrap the rrff to the left. line is the date code, backend revision and fab site. If BE Part Rev has only one character, use rbff format instead of rrff dddddddddd dddddddddd yywwbrrffb nnnnnnbbbb 3rd 4th line is the lot code nnnn c Lines 1 – 4: 10 characters per line Line 5: 4 characters 1st and 2nd line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN separated with a blank then wrap the rrff to the left. 3rd line is the date code, backend revision and fab site. If BE Part Rev has only one character, use rbff format instead of rrff 4th line is the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY7C63801-SXC. Line 1: CY7C63813Line 2: SXC 1237 Line 3: A 05 Line 4: 631859 Packages : • SOIC 16L – 300 mils • SOIC 16L - 300 mils Note: 1. For Non-MIA devices, mark last four digits of the assembly lot number (nnnn) beside the pin 1 indicator. 5 July 2017 Rev17 Reference: 37-00001, Figure 4 SOIC 20L/SOIC 24L Using Gold (Au) Wire dddddddddd dddddddddd yywwbrrffb nnnnnnbbbb nnnn Lines 1 – 4: 10 characters per line Line 5: 4 characters Using Copper (Cu) Wire 1st and 2nd line is the marketing part number. 3rd line is the date code, backend revision and fab site 4th line is the lot code dddddddddd dddddddddd yywwbrrffb nnnnnnbbbb nnnn c Lines 1 – 4: 10 characters per line Line 5: 4 characters 1st and 2nd line is the marketing part number. 3rd line is the date code, backend revision and fab site 4th line is the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY8C24223A-24SXI Line 1: CY8C24223 Line 2: A-24SXI Line 3: 1131 C 05 Line 4: 643236 6 July 2017 Rev17 Note: 1. If Mkt. PN is >10 char, break the Mkt. PN after the 10th character then move the remaining characters on the second line. 2. If the dash (“-”) falls in any character before the 10th character, break the Mkt. PN after the dash then move the remaining characters to the second line. 3. If characters “A”, “C”, or “P” falls in any characters before the 10th character, break the Mkt. PN after “A”, “C”, or “P” characters then move the remaining characters on the second line. Reference: 37-00001, Figure 5 SOIC 28L/SOIC 44L Using Gold (Au) Wire dddddddddddd dddddddddddd yywwbnnnnnnb xxxx rrffbbbbbbbb nnnn Lines 1 – 4: 12 characters per line Line 5: 4 characters 1st and 2nd line is the marketing part number. If Mkt. PN is ≤12 characters, move line 3 to line 2 then succeeding lines follows. 3rd line is the date code and lot code 4th line is the backend revision and fab site. If BE Part Rev has only one character, then use rbff format instead of rrff. xxxx – Country of Origin (COO) – for Packages with no engraved COO. Lines 1 – 4: 12 characters per line Line 5: 4 characters Using Copper (Cu) Wire 1st and 2nd line is the marketing part number. If Mkt. PN is ≤12 characters, move line 3 to line 2 then succeeding lines follows. dddddddddddd dddddddddddd yywwbnnnnnnb xxxx rrffbbbbbbbb nnnn c 3rd line is the date code and lot code 4th line is the backend revision and fab site. If BE Part Rev has only one character, then use rbff format instead of rrff. xxxx – Country of Origin (COO) – for Packages with no engraved COO. The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY7C65113C-SXC Line 1: CY7C65113CLine 2: SXC Line 3: 1137 647027 Line 4: PHI G 23 7 July 2017 Rev17 Note: 1. If Mkt. PN is >12 characters, break the Mkt. PN after the 12th character then move the remaining characters to the second line. 2. If the dash (“-”) falls in any character before the 12th character, break the Mkt. PN after the dash (“-”) then move the remaining character to the second line. 3. For Non-MIA devices, mark last four digits of the assembly lot number (nnnn) beside the pin 1 indicator. Packages : • SOIC 28 - 300/400/450 mils • SOIC 44 - 300/400/450 mils Reference: 37-00001, Figure 6 SOIC 28L/SOIC 44L (SNC – GULL WING) Using Gold (Au) Wire dddddddddddd dddddddddddd yywwbnnnnnnb xxxx rrffbbbbbbbb Lines 1 – 4: 12 characters per line Line 5: 4 characters 1st and 2nd line is the marketing part number. If Mkt. PN is ≤12 characters, move line 3 to line 2 then succeeding lines follows. 3rd line is the date code and lot code Using Copper (Cu) Wire dddddddddddd dddddddddddd yywwbnnnnnnb xxxx rrffbbbbbbbb nnnn nnnn 4th line is the backend revision and fab site. If BE Part Rev has only one character, then use rbff format instead of rrff. xxxx – Country of Origin (COO) – for Packages with no engraved COO. c Lines 1 – 4: 12 characters per line Line 5: 4 characters 1st and 2nd line is the marketing part number. If Mkt. PN is ≤12 characters, move line 3 to line 2 then succeeding lines follows. 3rd line is the date code and lot code 4th line is the backend revision and fab site. If BE Part Rev has only one character, then use rbff format instead of rrff. xxxx – Country of Origin (COO) – for Packages with no engraved COO. The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY62256EV18LL-70SNXI Line 1: CY62256EV18L Line 2: L-70SNXI Line 3: 1125 635328 Line 4: PHI F 04 8 Note: 1. If Mkt. PN is >12 characters, break the Mkt. PN after the 12th character then move the remaining characters to the second line. 2. If the dash (“-”) falls in any character before the 12th character, break the Mkt. PN after the dash (“-”) then move the remaining character to the second line. 3. For Non-MIA devices, mark last four digits of the assembly lot number (nnnn) beside the pin 1 indicator. Packages : • SOIC 28 - 300/400/450 mils • SOIC 44 - 300/400/450 mils July 2017 Rev17 Reference: 37-00001, Figure 6 SOJ 16L/SOJ 18L Using Gold (Au) Wire dddddddddd dddddddddd yywwbrrffb nnnnnnbbbb nnnn Lines 1 – 4: 10 characters per line Line 5: 4 characters Using Copper (Cu) Wire 1st and 2nd line is the marketing part number. 3rd line is the date code, backend revision and fab site 4th line is the lot code dddddddddd dddddddddd yywwbrrffb nnnnnnbbbb nnnn c Lines 1 – 4: 10 characters per line Line 5: 4 characters 1st and 2nd line is the marketing part number. 3rd line is the date code, backend revision and fab site 4th line is the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Packages : • SOJ16 - 300 mils • SOJ18 - 300 mils 9 July 2017 Rev17 Reference: 37-00001, Figure 4 SOJ 20L/SOJ 24L Using Gold (Au) Wire dddddddddd dddddddddd yywwbrrffb nnnnnnbbbb nnnn Lines 1 – 4: 10 characters per line Line 5: 4 characters Using Copper (Cu) Wire 1st and 2nd line is the marketing part number. 3rd line is the date code, backend revision and fab site 4th line is the lot code dddddddddd dddddddddd yywwbrrffb nnnnnnbbbb nnnn c Lines 1 – 4: 10 characters per line Line 5: 4 characters 1st and 2nd line is the marketing part number. 3rd line is the date code, backend revision and fab site 4th line is the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY7C128A-20VXC Line 1: CY7C128ALine 2: 20VXC 1131 Line 3: F 02 Line 4: 643588 10 Note: 1. If Mkt. PN is >10 char, break the Mkt. PN after the 10th character then move the remaining characters on the second line. 2. If the dash (“-”) falls in any character before the 10th character, break the Mkt. PN after the dash then move the remaining characters to the second line. 3. If characters “A”, “C”, or “P” falls in any characters before the 10th character, break the Mkt. PN after “A”, “C”, or “P” characters then move the remaining characters on the second line. July 2017 Rev17 Reference: 37-00001, Figure 5 SOJ 28L - SOJ 44L Using Gold (Au) Wire dddddddddd dddddddddd yywwbrrffb nnnnnnbbbb nnnn Lines 1 – 4: 12 characters per line Line 5: 4 characters and line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN and date code. 1st Using Copper (Cu) Wire 2nd 3rd line is the backend revision, fab site, and lot code dddddddddd dddddddddd yywwbrrffb nnnnnnbbbb nnnn Lines 1 – 4: 12 characters per line Line 5: 4 characters 1st and 2nd line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN. 3rd line is the backend revision, fab site, and lot code c The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. Example Marking Format: : CY7C1009D-10VXI Line 1: CY7C1009D Line 2: -10VXI 1513 Line 3: N 04 612604 11 July 2017 Rev17 Note: 1. If Mkt PN is >12 characters, break the Mkt. PN after the 12th character then move the remaining characters to the second line. 2. If the dash (“-”) falls in any character before the 12th character, break the Mkt. PN after the dash (“-”) then move the remaining character to the second line. 3. Move the rrbff to the left followed by a blank (b) and the 6 digit mark lot number (nnnnnn) 4. For Non-MIA devices, mark last four digits of the assembly lot number (nnnn) beside the pin 1 indicator. Packages : • SOJ28 - 300/400 mils • SOJ32 - 300/400 mils • SOJ44 - 300/400 mils Reference: 37-00001, Figure 9 SSOP 20L/SSOP 28L Using Gold (Au) Wire Lines 1 – 3: 15 characters per line Using Copper (Cu) Wire Lines 1 – 3: 15 characters per line 1st is the marketing part number ddddddddddddddd ddddddddddbyyww rbffblllbnnnnnn 1st is the marketing part number 2nd line is the remaining marketing part number and datecode 3rd line is the backend revision, fab site, ‘CYP’ and lot code ddddddddddddddd ddddddddddbyyww rbffblllbnnnnnn c 2nd line is the remaining marketing part number and datecode 3rd line is the backend revision, fab site, ‘CYP’ and lot code The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. Example Marking Format: : CY8C21334-24PVXI Line 1: CY8C21334Line 2: 24PVXI 1307 Line 3: A 05 CYP 607009 12 July 2017 Rev17 Packages : • SOJ20 - 209 mils • SOJ28 - 209 mils Reference: 37-00001, Figure 34 SSOP 48L/SSOP 56L Using Gold (Au) Wire ddddddddddddddddddd rrbffbxxxbyywwbbbbb lllbnnnnnnbbbbbbbbb Lines 1 – 3: 19 characters per line 1st is the marketing part number 2nd line backend revision fab site, COO and date code. 3rd line is the ‘CYP and the lot code Using Copper (Cu) Wire Lines 1 – 3: 19 characters per line 1st is the marketing part number ddddddddddddddddddd rrbffbxxxbyywwbbbbb lllbnnnnnnbbbbbbbbb c 2nd line backend revision fab site, COO and date code. 3rd line is the ‘CYP and the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY7C68013A-56PVXC Line 1: CY7C68013A-56PVXC Line 2: B 04 CHI 1143 Line 3: CYP 652398 13 July 2017 Rev17 Reference: 37-00001, Figure 35 QSOP 20L/QSOP 28L Using Gold (Au) Wire dddddddddddddddd dddbyywwbbbbbb rrbffbbbbbbbbb lllbnnnnnnbbbb Using Copper (Cu) Wire 1st and 2nd line (16 characters) is the marketing part number. If total Mkt Part number characters exceed 16 characters, then first 16 characters will be mark on the unit (first and 2nd line will be used). This will be followed by the datecode. dddddddddddddddd c dddbyywwbbbbbb rrbffbbbbbbbbb lllbnnnnnnbbbb 3rd line (14 characters) is the backend revision and fab site. 1st and 2nd line (16 characters) is the marketing part number. If total Mkt Part number characters exceed 16 characters, then first 16 characters will be mark on the unit (first and 2nd line will be used). This will be followed by the datecode. 3rd line (14 characters) is the backend revision and fab site. 4th line is the ‘CYP’ and lot code. The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. 4th line is the ‘CYP’ and lot code. Example Marking Format: : CY7C60223-QXC Line 1: CY7C60223Line 2: QXC 1043 Line 3: A 05 Line 4: CYP 653647 NOTES: 1. 2. 3. 14 July 2017 Rev17 First 2-lines will be used for marketing part number If dash (-) is used on the first 9-characters for marketing part numbers split the characters before the dash and wrap on 2nd line. If dash is used on the 10th or 11th characters, ignore dash. Packages : • QSOP20 – 150mils • QSIOP28 – 150mils Reference: 37-00001, Figure 32 TSSOP 8L Using Gold (Au) Wire Using Copper (Cu) Wire Lines 1 – 3: 6 characters per line dddddd dddddd yywwbb 1st and 2nd line is the marketing part number dddddd dddddd c yywwbb Lines 1 – 3: 6 characters per line 1st and 2nd line is the marketing part number 3rd line is the date code 3rd line is the date code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY25100ZXCF Line 1: CY2510 Line 2: 0ZXCF Line 3: 1125 15 July 2017 Rev17 Note: 1. Requirement of “SIX DIGIT ASSEMBLY LOT NUMBER AND COUNTRY OF ORIGIN IS REQUIRED ON BACKSIDE MARKING” Packages : • TSSOP 8 – 173 mils Reference: 37-00001, Figure 24 TSSOP 16L/TSSOP 14L Using Gold (Au) Wire ddddddddddddd ddddddddddddd yywwrrbffbbbb nnnnnnbbbbbbb Lines 1 – 4: 13 characters per line Lines 1 – 4: 13 characters per line Using Copper (Cu) Wire 1st and 2nd line is the marketing part number. If total Mkt Part number characters exceed 13 characters, then first 13 characters will be mark on the unit (first and 2nd line will be used). ddddddddddddd ddddddddddddd yywwrrbffbbbb nnnnnnbbbbbbb c 1st and 2nd line is the marketing part number. If total Mkt Part number characters exceed 13 characters, then first 13 characters will be mark on the unit (first and 2nd line will be used). 3rd line is the date code, backend revision, fab site 4th line is the lot code 3rd line is the date code, backend revision, fab site The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. 4th line is the lot code Example Marking Format: : CY23FS04ZXIT Line 1: CY23FS04Z Line 2: XI Line 3: 1143 B 05 Line 4: 654340 NOTES: 1. 2. 3. 16 First 2-lines will be used for marketing part number If dash (-) is used on the first 9-characters for marketing part numbers split the characters before the dash and wrap on 2nd line. If dash is used on the 10th or 11th characters, ignore dash. Packages : • TSSOP16 – 173 mils • TSSOP15 – 173 mils July 2017 Rev17 Reference: 37-00001, Figure 25 TSSOP 20L/TSSOP 38L Lines 1 – 4: 13 characters per line Using Gold (Au) Wire ddddddddddddd ddddddddddddd xxxyywwbrrbff lllbnnnnnnbbb Using Copper (Cu) Wire Lines 1 – 4: 13 characters per line 1st and 2nd line is the marketing part number. If total Mkt Part number characters exceed 13 characters, then first 13 characters will be mark on the unit (first and 2nd line will be used). If the total Mkt Part number characters is 13 characters, move the succeeding characters to line 2 ddddddddddddd ddddddddddddd xxxyywwbrrbff lllbnnnnnnbbb c 1st and 2nd line is the marketing part number. If total Mkt Part number characters exceed 13 characters, then first 13 characters will be mark on the unit (first and 2nd line will be used). If the total Mkt Part number characters is 13 characters, move the succeeding characters to line 2 3rd line is the COO, date code, backend revision, fab site 3rd line is the COO, date code, backend revision, fab site 4th line is the ‘CYP’ and lot code 4th line is the ‘CYP’ and lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY25404ZXI217 Line 1: CY25404ZXI217 Line 2: TWN1301 B 04 Line 3: CYP 602162 NOTES: 1. 2. 3. 17 July 2017 Rev17 First 2-lines will be used for marketing part number If dash (-) is used on the first 9-characters for marketing part numbers split the characters before the dash and wrap on 2nd line. If dash is used on the 10th or 11th characters, ignore dash. Packages : • TSSOP20 – 173 mils • TSSOP38 – 173 mils Reference: 37-00001, Figure 26 TSSOP 20L/TSSOP 32L (REVERSE OPTION) Lines 1 – 3: 13 characters per line Using Gold (Au) Wire ddddddddddddd ddddddddbyyww rrbffbnnnnnnb Lines 1 – 3: 13 characters per line Using Copper (Cu) Wire 1st and 2nd line is the marketing part number. If total Mkt Part number characters exceed 13 characters, then first 13 characters will be mark on the unit (first and 2nd line will be used) followed by the datecode. ddddddddddddd ddddddddddddd yywwrrbffbnnn 1st and 2nd line is the marketing part number. If total Mkt Part number characters exceed 13 characters, then first 13 characters will be mark on the unit (first and 2nd line will be used) followed by the datecode. c 3rd line is the backend revision, fab site and the lot code The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. 3rd line is the backend revision, fab site and the lot code Example Marking Format: : : CY62256VNLL-70ZRXI NOTES: Line 1: CY62256VNLLLine 2: 70ZRXI 1301 Line 3: ND 04 600295 1. 2. 3. 18 First 2-lines will be used for marketing part number If dash (-) is used on the first 9-characters for marketing part numbers split the characters before the dash and wrap on 2nd line. If dash is used on the 10th or 11th characters, ignore dash. July 2017 Rev17 Reference: 37-00001, Figure 28 TSOP II 32L to TSOP II 54L Using Gold (Au) Wire dddddddddddd dddddddddddd yywwbnnnnnnb xxxx rrffbbbbbbbb nnnn Using Copper (Cu) Wire Lines 1 – 4: 12 characters per line Line 5: 4 characters 1st and 2nd line is the marketing part number. If Mkt. PN is >12 characters, break the Mkt. PN after the 12th character then move the remaining characters to the second line. If Mkt. PN is ≤12 characters, move line 3 to line 2 then succeeding lines follows. dddddddddddd dddddddddddd yywwbnnnnnnb xxxx rrffbbbbbbbb nnnn c Lines 1 – 4: 12 characters per line Line 5: 4 characters 1st and 2nd line is the marketing part number. If Mkt. PN is >12 characters, break the Mkt. PN after the 12th character then move the remaining characters to the second line. If Mkt. PN is ≤12 characters, move line 3 to line 2 then succeeding lines follows. 3rd line is the date code and lot code 3rd line is the date code and lot code 4th line is the backend revision and fab site. 4th line is the backend revision and fab site. xxxx – Country of Origin (COO) – for Packages with no engraved COO. xxxx – Country of Origin (COO) – for Packages with no engraved COO. The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY7C1011DV33-10ZSXI Note: Line 1: CY7C1011DV33 Line 2: -10ZSXI Line 3: 1301 600680 Line 4: PHI N 04 1. 2. 19 July 2017 Rev17 If the dash (“-”) falls in any character before the 12th character, break the Mkt. PN after the dash (“-”) then move the remaining character to the second line. For Non-MIA devices, mark last four digits of the assembly lot number (nnnn) beside the pin 1 indicator. Packages : • TSOP II 32 – 435/400 mils • TSOP II44 - 435/400 mils • TSOP II 54 - 435/400 mils Reference: 37-00001, Figure 6 TSOP 28L/TSOP 48L Using Gold (Au) Wire ddddddddddddd ddddddddddddd yywwrrbffbnnn Lines 1 – 3: 13 characters per line 1st line is the marketing part number. 2nd line is the marketing part number if > 13 chars and date code 3rd line is backend revision, fab site and the lot code Using Copper (Cu) Wire Lines 1 – 3: 13 characters per line 1st line is the marketing part number. ddddddddddddd ddddddddddddd yywwrrbffbnnn c 2nd line is the marketing part number if > 13 chars and date code 3rd line is backend revision, fab site and the lot code The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. Example Marking Format: : CY62167EV30LL-45ZXI Line 1: CY62167EV30LL Line 2: -45ZXI 1101 Line 3: F 04 603731 NOTES: 1. 2. 3. 20 July 2017 Rev17 First 2-lines will be used for marketing part number If total Mkt Part Number characters exceed 13 characters, then first characters will be mark on line 1 followed by remaining of the part number on line 2. Date code follows after the part number. Packages : • TSOP28 – 767 mils • TSOP48 - 767 mils Reference: 37-00001, Figure 27 STSOP 32L Using Gold (Au) Wire Lines 1 – 3: 13 characters per line Lines 1 – 3: 13 characters per line Using Copper (Cu) Wire 1st line is the marketing part number line is the marketing part number 1st ddddddddddddd ddddddddbyyww rrbffbnnnnnnb ddddddddddddd ddddddddbyyww rrbffbnnnnnnb c line is the marketing part number if > 13 chars and datecode 2nd line is the backend revision, fab site and the lot code 3rd Example Marking Format: : CY62148ESL-55ZAXI Line 1: CY62148ESL-55 Line 2: ZAXI 1131 Line 3: F 04 636787 July 2017 Rev17 3rd line is the backend revision, fab site and the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. NOTES: 1. 2. 3. 21 2nd line is the marketing part number if > 13 chars and datecode First 2-lines will be used for marketing part number If total Mkt Part number characters exceed 13 characters, then first 13 characters will be mark on line 1 followed by remaining characters of the part number on line 2. Date code follows after the part number Reference: 37-00001, Figure 37 TQFP 32L to TQFP 144L Using Gold (Au) Wire Using Copper (Cu) Wire Lines 1 – 4: 14 characters per line Lines 1 – 4: 14 characters per line dddddddddddddd dddddddddbyyww rrbffbbbnnnnnn 1st and 2nd line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN. dddddddddddddd dddddddddbyyww rrbffbbbnnnnnn 1st and 2nd line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN. 3rd line backend revision, fab site And lot code c The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. 3rd line is backend revision, fab site and lot code Example Marking Format: : CY8C5468AXI-LP106 Line 1: CY8C5468AXILine 2: LP106 1301 Line 3: A 04 600436 Note: 1. 2. 22 July 2017 Rev17 If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second line. For Non-MIA devices, mark last four digits of the assembly lot number (nnnn) beside the pin 1 indicator. Reference: 37-00001, Figure 23 TQFP 160L to TQFP 388L Using Gold (Au) Wire dddddddddddddd dddddddddddddb yywwbrrbffbbbb nnnnnnbbbbbbbb Lines 1 – 4: 14 characters per line 1st and 2nd line is the marketing part number. If Mkt. PN is ≤14 characters, move line 3 to line 2 then succeeding lines follows. 3rd line is the date code, backend revision and fab site Using Copper (Cu) Wire Lines 1 – 4: 14 characters per line 1st and 2nd line is the marketing part number. If Mkt. PN is ≤14 characters, move line 3 to line 2 then succeeding lines follows. dddddddddddddd dddddddddddddb yywwbrrbffbbbb nnnnnnbbbbbbbb c 4th line is the lot code 3rd line is the date code, backend revision and fab site 4th line is the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY37128VP160-125AXC Example Marking Format: : CY37256P160-83AXC Line 1: CY37128VP1601Line 2: 125AXC 1137 B 6 Line 3: 706976 23 July 2017 Rev17 Note: 1. If Mkt PN is >14 characters, break the Mkt. PN after the 14th character then move the remaining characters to the second line. 2. If the dash (“-”) falls in any character before the 14th character, break the Mkt. PN after the dash (“-”) then move the remaining character to the second line. 3. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN separated with a blank then move the rrbff to the left followed by a blank (b) and the 6 digit mark lot number (nnnnnn) Example: (ASE Taiwan) Line 1: CY37256P160Line 2: 83AXC TWN 1237 Line 3: B 16 630941 Note: For ASET Assembled: COO is added after the part number Reference: 37-00001, Figure 22 TQFP 32L to TQFP 144L (EXPOSED PAD) Using Gold (Au) Wire dddddddddddddd dddddddddbyyww rrbffbbbnnnnnn Lines 1 – 4: 14 characters per line Using Copper (Cu) Wire Lines 1 – 4: 14 characters per line 1st and 2nd line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN. 1st and 2nd line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN. dddddddddddddd dddddddddbyyww rrbffbbbnnnnnn 3rd line is the date code, backend revision and fab site c 3rd line is the date code, backend revision and fab site 4th line is the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. 4th line is the lot code Example Marking Format: : : CY525G101DX-AEXC Note: Line 1: CY525G101DXLine 2: AEXC 1307 B 04 Line 3: 605963 24 July 2017 Rev17 1. 2. If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second line. For Non-MIA devices, mark last four digits of the assembly lot number (nnnn) beside the pin 1 indicator. Reference: 37-00001, Figure 23 PQFP 32L to PQFP 144L Using Gold (Au) Wire dddddddddddddd dddddddddbyyww rrbffbbbnnnnnn Lines 1 – 4: 14 characters per line 1st and 2nd line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN 3rd line is the date code, backend revision and fab site Using Copper (Cu) Wire 1st and 2nd line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN dddddddddddddd dddddddddbyyww rrbffbbbnnnnnn c Line 2: TWN1231 G 02 Line 3: 628291 July 2017 Rev17 4th line is the lot code Note: 1. 2. 25 3rd line is the date code, backend revision and fab site The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. 4th line is the lot code Example Marking Format: : CY7C136A-55NXI Lines 1 – 4: 14 characters per line If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second line. For Non-MIA devices, mark last four digits of the assembly lot number (nnnn) beside the pin 1 indicator. Reference: 37-00001, Figure 23 PQFP 160L to PQFP 388L Using Gold (Au) Wire Lines 1 – 4: 14 characters per line Using Copper (Cu) Wire 1st and 2nd line is the marketing part number 1st and 2nd line is the marketing part number dddddddddddddd dddddddddddddb yywwbrrbffbbbb nnnnnnbbbbbbbb 3rd line is the date code, backend revision and fab site 4th 26 July 2017 Rev17 line is the lot code Lines 1 – 4: 14 characters per line dddddddddddddd dddddddddddddb yywwbrrbffbbbb nnnnnnbbbbbbbb c 3rd line is the date code, backend revision and fab site 4th line is the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Reference: 37-00001, Figure 22 CQFP 52L to CQFP 144L Using Gold (Au) Wire dddddddddddddd dddddddddbyyww rrbffbbbnnnnnn Lines 1 – 4: 14 characters per line Using Copper (Cu) Wire Lines 1 – 4: 14 characters per line 1st and 2nd line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN 1st and 2nd line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN dddddddddddddd dddddddddbyyww rrbffbbbnnnnnn 3rd line is the date code, backend revision and fab site c 4th line is the lot code 3rd line is the date code, backend revision and fab site 4th line is the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : : CY7C960A-UMB Line 2: C THA0907 B 02 Line 3: 605251 Note: 1. 2. 27 July 2017 Rev17 If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second line. For Non-MIA devices, mark last four digits of the assembly lot number (nnnn) beside the pin 1 indicator. Reference: 37-00001, Figure 23 CQFP 160L to CQFP 388L Using Gold (Au) Wire Lines 1 – 4: 14 characters per line Using Copper (Cu) Wire 1st and 2nd line is the marketing part number 1st and 2nd line is the marketing part number dddddddddddddd dddddddddddddb yywwbrrbffbbbb nnnnnnbbbbbbbb 3rd line is the date code, backend revision and fab site 4th 28 July 2017 Rev17 line is the lot code Lines 1 – 4: 14 characters per line dddddddddddddd dddddddddddddb yywwbrrbffbbbb nnnnnnbbbbbbbb c 3rd line is the date code, backend revision and fab site 4th line is the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Reference: 37-00001, Figure 22 PDIP 8L Using Gold (Au) Wire Using Copper (Cu) Wire 1st and 2nd line is the marketing part number. dddddddddd dddddddddd yywwbrrbff lllbnnnnnn 3rd line is the date code, backend revision and fab site 4th line is the CYP and the lot code dddddddddd dddddddddd yywwbrrbff lllbnnnnnn c 1st and 2nd line is the marketing part number. 3rd line is the date code, backend revision and fab site 4th line is the CYP and the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY8C24123A-24PXI Line 1: CY8C24123 Line 2: A-24PXI Line 3: 1231 B 04 Line 4: CYP 629726 29 July 2017 Rev17 Packages : • PDIP8 – 300 mils Reference: 37-00001, Figure 1 PDIP 16L to PDIP 64L Using Gold (Au) Wire dddddddddddddddd dddddddddddddddd yywwbrrffbbbbbbb nnnnnnbbbbbbbbbb 16 characters per line 1st and 2nd line is the marketing part number. 3rd line is the date code, backend revision and fab site 4th line is “CYP and the lot code 16 characters per line Using Copper (Cu) Wire 1st and 2nd line is the marketing part number. dddddddddddddddd dddddddddddddddd yywwbrrffbbbbbbb nnnnnnbbbbbbbbbb c 3rd line is the date code, backend revision and fab site 4th line is “CYP” and the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY8C24123A-24PXI Line 1: CY8C24123 Line 2: A-24PXI Line 3: 1331 B 04 Line 4: CYP 632377 30 July 2017 Rev17 Reference: 37-00001, Figure 3 CERDIP 8L Using Gold (Au) Wire dddddddddd dddddddddd yywwbrrbff lllbnnnnnn 10 characters per line 1st and 2nd line is the marketing part number. 3rd line is the date code, backend revision and fab site 4th line is the CYP and the lot code Using Copper (Cu) Wire 10 characters per line 1st and 2nd line is the marketing part number. dddddddddd dddddddddd yywwbrrbff lllbnnnnnn c 3rd line is the date code, backend revision and fab site 4th line is the CYP and the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Packages : • CERDIP – 300 mils 31 July 2017 Rev17 Reference: 37-00001, Figure 1 CERDIP 16L to CERDIP 64L Using Gold (Au) Wire 16 characters per line and line is the marketing part number. 1st dddddddddddddddd dddddddddddddddd yywwbrrffbbbbbbb nnnnnnbbbbbbbbbb 3rd line is the date code, backend revision and fab site July 2017 Rev17 16 characters per line 1st and 2nd line is the marketing part number. 2nd 4th line is the lot code 32 Using Copper (Cu) Wire dddddddddddddddd dddddddddddddddd yywwbrrffbbbbbbb nnnnnnbbbbbbbbbb c 3rd line is the date code, backend revision and fab site 4th line is the lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Reference: 37-00001, Figure 3 BGA Using Gold (Au) Wire dddddddddddddd dddddddddbyyww rrbbffbbbbbbbb lllbnnnnnn xxx Lines 1 – 4: 14 characters per line Using Copper (Cu) Wire Lines 1 – 4: 14 characters per line 1st and 2nd line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww (date code) to the second line after the Mkt. PN. 1st and 2nd line is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww (date code) to the second line after the Mkt. PN. dddddddddddddd dddddddddbyyww rrbbffbbbbbbbb lllbnnnnnn xxx 3rd line is backend revision and fab site c 4th line is the CYP and the lot code 3rd line is backend revision and fab site 4th line is the CYP and the lot code 5th line is the COO The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. 5th line is the COO Example Marking Format: : : CY7C1412KV18-300BZXC Note: Package: BGA165 Assembly Location: ASE Taiwan Line 1: CY7C1412KV18Line 2: 300BZXC Line 3: TWN1319 K 33 Line 4: 622252 1. Assembly Location: CML Philippines Line 1: CY7C1412KV18Line 2: 300BZXC 1219 Line 3: K 33 615123 2. If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second line. For Non-MIA devices, mark last four digits of the assembly lot number (nnnn) beside the pin 1 indicator. Packages : • BGA100, BGA144, BGA165, BGA172, BGA196, BGA119, BGA121, BGA209, BGA256, BGA272, BGA 484 (906mils) 33 July 2017 Rev17 Reference: 37-00001, Figure 23 BGA 292L/BGA 388L/BGA 484L Using Gold (Au) Wire Lines 1 – 4: 16 characters per line Using Copper (Cu) Wire 1st the marketing part number 1st the marketing part number dddddddddddddddd ddddddddxxxbyyww rrbffbnnnnnnbbbb Lines 1 – 4: 16 characters per line 2nd line is the marketing part number followed by the COO and datecode. dddddddddddddddd ddddddddxxxbyyww rrbffbnnnnnnbbbb 3rd line is the backend revision, fab site and lot code c 2nd line is the marketing part number followed by the COO and datecode 3rd line is the backend revision, fab site and lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CYD36S36V18-200BGXC Part Number: Line 1: CYD36S36V18Line 2: 200BGXC TWN 1213 Line 3: A 04 610305 Note: 1. If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second line. Packages : • BGA292, BGA388, BGA484 (1063 mils) 34 July 2017 Rev17 Reference: 37-00001, Figure 43 L2BGA 256L Using Gold (Au) Wire Lines 1 – 3:16 characters per line Using Copper (Cu) Wire 1st the marketing part number 1st the marketing part number dddddddddddddddd ddddddddxxxbyyww rrbffbnnnnnnbbbb Lines 1 – 3: 16 characters per line 2nd line is the marketing part number followed by the COO and datecode dddddddddddddddd ddddddddxxxbyyww rrbffbnnnnnnbbbb 3rd line is the backend revision, fab site and lot code c 2nd line is the marketing part number followed by the COO and datecode 3rd line is the backend revision, fab site and lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CYV15G0203TB-BGXC Line 1: CYV15G0203TBLine 2: BGXC TWN 1301 Line 3: C 04 700273 35 July 2017 Rev17 Note: 1. If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second line. Reference: 37-00001, Figure 43 FCBGA 361L (WITH HEAT SPREADER) Using Gold (Au) Wire Lines 1 – 3:16 characters per line Using Copper (Cu) Wire 1st the marketing part number 1st the marketing part number dddddddddddddddd ddddddddxxxbyyww rrbffbnnnnnnbbbb 2nd line is the marketing part number followed by the COO and datecode 3rd line is the backend revision, fab site and lot code 36 July 2017 Rev17 Lines 1 – 3: 16 characters per line dddddddddddddddd ddddddddxxxbyyww rrbffbnnnnnnbbbb c 2nd line is the marketing part number followed by the COO and datecode 3rd line is the backend revision, fab site and lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Reference: 37-00001, Figure 43 BGA 36L to BGA 48L Using Gold (Au) Wire dddddddddd dddddddddd xxxbyywwbb rrbffbbbbb lllbnnnnnn Using Copper (Cu) Wire Lines 1 – 5: 10 characters per line Lines 1 – 5: 10 characters per line 1st and 2nd line is the marketing part number 1st and 2nd line is the marketing part number dddddddddd dddddddddd xxxbyywwbb rrbffbbbbb lllbnnnnnn 3rd line is the COO, and date code 4th line is the backend revision and fab site c 3rd line is the COO, and date code 4th line is the backend revision and fab site 5th line is ‘CYP’ and lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. 5th line is ‘CYP’ and lot code Example Marking Format: : CY62147EV30LL-45BVXI Line 2: 0LL-45BVXI Line 3: PHI 1131 Line 4: F 04 Line 5: CYP 642602 37 July 2017 Rev17 Note: 1. If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second line. Reference: 37-00001, Figure 47 BGA 36L/BGA 48L/BGA 60L/BGA 121L Using Gold (Au) Wire ddddddddddddd ddddddddbyyww rrbffbxxx lllbnnnnnn Lines 1 – 4: 13 characters per line 1st line is the marketing part number 2nd line is the remaining marketing part number and datecode Using Copper (Cu) Wire Lines 1 – 4: 13 characters per line 1st line is the marketing part number ddddddddddddd ddddddddbyyww rrbffbxxx lllbnnnnnn 3rd line is the backend revision, fab site and COO 4th line is ‘CYP’ and lot code Example Marking Format: : CY14V101LA-BA45XI Line 1: CY14V101LA-BA Line 2: 45XI 1101 Line 3: C 04 PHI Line 4: CYP 601532 38 c 2nd line is the remaining marketing part number and datecode 3rd line is the backend revision, fab site and COO 4th line is ‘CYP’ and lot code The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. Example Marking Format: : CYUSB3035-BZXI Part Number: CYUSB3035-BZXI Package: BGA121 Assembly Location: ASE Taiwan Line 1: CYUSB3035-BZX Line 2: I 1331 Line 3: A 33 TWN Line 4: CYP 630375 Assembly Location: CML Philippines Line 1: CYUSB3035-BZX Line 2: I 1231 Line 3: A 33 PHI Line 4: CYP 629999 July 2017 Rev17 Reference: 37-00001, Figure 36 VFBGA 56L/VFBGA 84L/VFBGA 100L Using Gold (Au) Wire dddddddddd dddddddddd xxxbyywwbb rrbffbbbbb lllbnnnnnn Using Copper (Cu) Wire Lines 1 – 5: 10 characters per line Lines 1 – 5: 10 characters per line 1st and 2nd line is the marketing part number 1st and 2nd line is the marketing part number dddddddddd dddddddddd xxxbyywwbb rrbffbbbbb lllbnnnnnn 3rd line is the COO, and date code 4th line is the backend revision and fab site c 3rd line is the COO, and date code 4th line is the backend revision and fab site 5th line is ‘CYP’ and lot code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. 5th line is ‘CYP’ and lot code Example Marking Format: : CYDMX256A16-90BVXI Line 1: CYDMX256A1 Line 2: 6-90BVXI Line 3: PHI 1301 Line 4: A 04 Line 5: 601268 39 July 2017 Rev17 Note: 1. If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second line. Reference: 37-00001, Figure 47 VFBGA 60L/VFBGA 70L Using Gold (Au) Wire dddddddddd ddddddddddd yywwbrrbffb lllbbnnnnnn xxx Using Copper (CuPd) Wire Line 1: 10 characters Lines 2 – 4: 11 characters per line Line 5: 3 characters dddddddddd ddddddddddd yywwbrrbffb lllbbnnnnnn xxx 1st and 2nd line is the marketing part number 3rd line is the date code, backend revision and fab site Line 1: 10 characters Lines 2 – 4: 11 characters per line Line 5: 3 characters 1st and 2nd line is the marketing part number 3rd line is the date code, backend revision and fab site c 4th line is CYP’ and lot code 4th line is CYP’ and lot code 5th line is the COO 5th line is the COO Example Marking Format: : CY8CTMA463-60BUI Line 1: CY8CTMA463 Line 2: -60BUI Line 3: 1249 B 04 Line 4: CYP 639287 Line 5: TWN Note: 1. If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second line. Packages : • VFBGA 60/VFBGA70 – 216 mils 40 July 2017 Rev17 Reference: 37-00001, Figure 56 UFBGA 48L Using Copper (Cu) Wire 1st line (7characters) is the marketing part number ddddddd ddddddd ddddddd yywwbnn nnnn 2nd line (7characters) is the marketing part number. 3rd line (7characters) is the marketing part number. c 4th line (7 characters) is the datecode and lot code 5th line (4 characters) is the lotcode The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CYTMA525-48BUI25ZZ Line 1: CYTMA52 Line 2: 5-48BUI Line 3: 25ZZ Line 4: 1419 61 Line 5: 7493 41 July 2017 Rev17 CYTMA52 5-48BUI 25ZZ 1419 61 7493 Note: 1. If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second and third line. Reference: 37-00001, Figure 125 UFBGA 60L/UFBGA 70L Using Gold (Au) Wire 1st line (10 characters) is the marketing Using Copper (Cu) Wire part number dddddddddd ddddddddddd yywwbrrffbb lllbnnnnnnb xxx 2nd line (11 characters) is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN separated with a blank then move the rrbff to the next line. dddddddddd ddddddddddd yywwbrrffbb lllbnnnnnnb xxx 3rd line (11 characters) is the datecode, backend revision and fab site c 2nd line (11 characters) is the marketing part number. If Mkt. PN on line 2 contains ≤5 char, move yyww to the second line after the Mkt. PN separated with a blank then move the rrbff to the next line. 3rd line (11 characters) is the datecode, backend revision and fab site 4th (11 characters) line is ‘CYP’ and lot code 4th (11 characters) line is ‘CYP’ and lot code 5th 1st line (10 characters) is the marketing part number 5th line (3 characters) is the COO line (3 characters) is the COO The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: : CY8CTMA463-60BUI Line 2: -60BUI Line 3: 1249 B 04 Line 4: CYP 639287 Line 5: TWN Note: 1. If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second line. Packages : • UFBGA 60/UFBGA70 – 216 mils 42 July 2017 Rev17 Reference: 37-00001, Figure 56 UFBGA 84L Using Gold (Au) Wire dddddddddd dddddddddd xxxbyywwbb rrbffbbbbb lllbnnnnnn Lines 1 – 4: 10 characters per line 1st line is the marketing part number 2nd line is the remaining marketing part number 3rd line is the COO and the date code. Using Copper (Cu) Wire Lines 1 – 4: 10 characters per line 1st line is the marketing part number dddddddddd dddddddddd xxxbyywwbb rrbffbbbbb lllbnnnnnn c 4th line is the backend revision, fab site 2nd line is the remaining marketing part number 3rd line is the COO and the date code. 4th line is the backend revision, fab site 5th line is ‘CYP’ and lot code 5th line is ‘CYP’ and lot code The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. Example Marking Format: : CY8CTMA768BUI-23 Line 1: CY8CTMA768 Line 2: BUI-23 Line 3: TWN 1249 Line 4: B 04 Line 5: CYP 640128 43 July 2017 Rev17 Packages : • UFBGA 84L – 236 mils Reference: 37-00001, Figure 47 PLCC 24L TO PLCC 32L Using Gold (Au) Wire ddddddddddd ddddddbyyww brrbffbbbbb lllbnnnnnnb Using Copper (Cu) Wire Lines 1 – 4: 11 characters per line Lines 1 – 4: 11 characters per line 1st line is the marketing part number 1st line is the marketing part number ddddddddddd ddddddbyyww brrbffbbbbb lllbnnnnnnb line is the remaining marketing part number and datecode 2nd c 3rd line is the backend revision and fab site 2nd line is the remaining marketing part number and datecode 3rd line is the backend revision and fab site 4th line is ‘CYP’ and the lot code The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. 4th line is ‘CYP’ and the lot code Example Marking Format: : CY7B991V-5JXC -23 Line 1: CY7B991VNote: Line 2: 5JXC 11243 Line 3: V 02 Line 4: CYP 637742 44 July 2017 Rev17 1. If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second line. Reference: 37-00001, Figure 15 PLCC 44L TO PLCC 84L Using Gold (Au) Wire ddddddddddd ddddddbyyww brrbffbbbbb nnnnnnbbbbb Using Copper (Cu) Wire Lines 1 – 4: 11 characters per line Lines 1 – 4: 11 characters per line 1st line is the marketing part number 1st line is the marketing part number ddddddddddd ddddddbyyww brrbffbbbbb nnnnnnbbbbb line is the remaining marketing part number and datecode 2nd c 3rd line is the backend revision and fab site 2nd line is the remaining marketing part number and datecode 3rd line is the backend revision and fab site 4th line is the lot code The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. 4th line is the lot code Example Marking Format: : CY7C144E-15JXI Line 1: CY7C144ELine 2: 15JXI 1243 Line 3: NF 04 Line 4: 637415 45 July 2017 Rev17 Note: 1. If length of Mkt Part Number exceeds the maximum number of characters on Line 1, split the Mkt Part Number after the dash and wrapping the rest on the second line. Reference: 37-00001, Figure 17 LCC 04L TO LCC 06L Using Gold (Au) Wire Lines 1 – 2: 8 characters per line dddddddd ddddbyww 1st and 2nd line is the marketing part number 2nd line is the remaining marketing part number and last 3 digits of datecode (yww) Example Marking Format: : CY2XF32FLXIT I Line 1: CY2XF32F Line 2: LXI 213 46 July 2017 Rev17 Reference: 37-00001, Figure 64 QFN 8L Using Gold (Au) Wire 1st line (3 characters) is the 7th, 8th and 9th characters of marketing part number ddd nnn 2nd line (3 characters) is the last three digits of assembly lot number Example Marking Format: CY22U1SCALGXC-00 Packages : • QFN8 = 3x3 mm Line 1: SCA Line 2: nnn SCA nnn 47 July 2017 Rev17 Reference: 37-00001, Figure 116 QFN 16L Using Gold (Au) Wire dddd yyww nnnn 1st line (4 characters) is the 4 digit marketing part number before the dash (-) Using Copper (Cu) Wire 1st line (4 characters) is the 4 digit marketing part number before the dash (-) 2nd line (4 characters) is the datecode dddd yyww nnnn 3rd line (4 characters) is the last 4 digits of the lot number c 2nd line (4 characters) is the datecode 3rd line (4 characters) is the last 4 digits of the lot number The ‘C’ denotes the use of copper wire. Example Marking Format: CY8C20045-24LKXI Line 1: 0045 Line 2: 1225 Line 3: 3650 48 July 2017 Rev17 Packages : • QFN16L = 3x3 mm Reference: 37-00001, Figure 97 QFN 16L/24L/28 Using Gold (Au) Wire dddd dddddd yywwbn nnnn Using Copper (Cu) Wire 1st line (4 characters) is the marketing part number dddd dddddd yywwbn nnnn line (6 characters) is the marketing part number 2nd line (6 characters) is the date code and the first digit of the lot code 3rd c 4th line (4 characters) is the last 4 digit if lot code 1st line (4 characters) is the marketing part number 2nd line (6 characters) is the marketing part number 3rd line (6 characters) is the date code and the first digit of the lot code 4th line (4 characters) is the last 4 digit if lot code The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. Example Marking Format: CY8C20346-24LQXI Note: Line 1: CY8C Line 2: 20346Line 3: 1213 6 Line 4: 3312 49 July 2017 Rev17 1. First two lines will be mark with Marketing Part numbers only. If Marketing Part number exceeds 10 characters, Mark only the first 10 characters of the marketing part number. Ignore splitting and wrap first 10 characters over the first two lines. Reference: 37-00001, Figure 55 QFN/DFN 8L/16L/20L Using Gold (Au) Wire ddddddd dddddddd yywwbxxx nnnnnn 1st line (7 characters) is the marketing part number line (8 characters) is the marketing part number 2nd line (8 characters) is the date code and the first digit of the lot code 3rd 4th line (6 characters) is the lot code Using Copper (Cu) Wire ddddddd dddddddd yywwbxxx nnnnnn c 1st line (7 characters) is the marketing part number 2nd line (8 characters) is the marketing part number 3rd line (8 characters) is the date code and the first digit of the lot code 4th line (6 characters) is the lot code The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. Example Marking Format: CY14B101Q2-LHXI Line 1: CY14B10 Line 2: 1Q2-LHXI Line 3: 1207 TWN Line 4: 605256 50 July 2017 Rev17 Reference: 37-00001, Figure 48 QFN 28L/32L/36L/44L Using Gold (Au) Wire ddddddd dddddddd yywwbxxx nnnnnn AAA 1st line (7 characters) is the marketing part number line (8 characters) is the marketing part number 2nd line (8 characters) is the date code and the first digit of the lot code 3rd Using Copper (Cu) Wire ddddddd dddddddd yywwbxxx nnnnnn AAA c 1st line (7 characters) is the marketing part number 2nd line (8 characters) is the marketing part number 3rd line (8 characters) is the date code and the first digit of the lot code 4th line (6 characters) is the lot code 4th line (6 characters) is the lot code 5th line is the Strip ID for CML Autoline assembled only 5th line is the Strip ID for CML Autoline assembled only The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. Example Marking Format: CY8CTST242-LQI-01 Line 1: CY8CTST Line 2: 242-LQILine 3: 1301 PHI Line 4: 600815 Line 5: AAA 51 July 2017 Rev17 NOTES: 1. First 2-lines will be used for marketing part number 2. If dash (-) is used on the first 8-characters for marketing part numbers split the characters before the dash and wrap on 2nd line. 3. If dash is used on the 9th or 10th characters, ignore dash. 4. If total Mkt Part number characters exceed 15 characters, then first 15 characters will be mark on the unit (first and 2nd line will be used) Reference: 37-00001, Figure 52 QFN 40L/48/56L Using Gold (Au) Wire 1st line (8 characters) is the marketing Using Copper (Cu) Wire 2nd line (9 characters) is the marketing part number part number dddddddd ddddddddd yywwbrbff lllnnnnnn xxx AAA 2nd line (9 characters) is the marketing part number 3rd line (9 characters) is the date code, backend revision and fab site 4th line (9 characters) is ‘CYP’ and lot code 1st line (8 characters) is the marketing part number dddddddd ddddddddd yywwbrbff lllnnnnnn xxx AAA c 3rd line (9 characters) is the date code, backend revision and fab site 4th line (9 characters) is ‘CYP’ and lot code 5th line is the COO 6th line (3 characters) is the Strip ID for CML Autoline assembled only 5th line is the COO 6th line (3 characters) is the Strip ID for CML Autoline assembled only The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: CY8CTMA400-48LQI Line 1: CY8CTMA4 Line 2: 00-48LQI Line 3: 1307 B 04 Line 4: CYP606450 Line 5: PHI Line 6: AAA 52 NOTES: 1. First 2-lines will be used for marketing part number 2. If dash (-) is used on the first 8-characters for marketing part numbers split the characters before the dash and wrap on 2nd line. 3. If dash is used on the 9th or 10th characters, ignore dash. 4. If total Mkt Part number characters exceed 17 characters, then first 17 characters will be mark on the unit (first and 2nd line will be used) Packages : • QFN40/48/56 – 6X6 mm July 2017 Rev17 Reference: 37-00001, Figure 52 QFN 48L/56L Using Gold (Au) Wire ddddddddddddd ddddddddbyyww rrbffbxxx lllbnnnnnn AAA Lines 1 – 4: 13 characters per line Lines 1 – 4: 13 characters per line Using Copper (Cu) Wire 1st line is the marketing part number 2nd line is the remaining marketing part number and datecode 3rd line is the backend revision, fab site and COO 4th ddddddddddddd ddddddddbyyww rrbffbxxx lllbnnnnnn AAA c 1st line is the marketing part number 2nd line is the remaining marketing part number and datecode 3rd line is the backend revision, fab site and COO 4th line is ‘CYP’ and lot code 5th line (3 characters) is the strip ID applicable only for CML Autoline Assembled line is ‘CYP’ and lot code 5th line (3 characters) is the strip ID applicable only for CML Autoline Assembled The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. Example Marking Format: CY8C3445LTI-089 Line 1: CY8C3445LTI-0 Line 2: 89 1307 Line 3: A 04 PHI Line 4: CYP 610578 Line 5: AAA 53 July 2017 Rev17 Packages : • QFN48 – 7XX mm • QFN56 – 8X8 mm Reference: 37-00001, Figure 36 QFN 48L/56L Using Gold (Au) Wire ddddddddddd ddddddddddd yywwbrrbffb lllbnnnnnnb xxx Lines 1 – 4: 11 characters per line 1st and 2nd line is the marketing part number 3rd line is the date code, backend revision and fab site 4th line is ‘CYP’ and lot code Using Copper (Cu) Wire Lines 1 – 4: 11 characters per line 1st and 2nd line is the marketing part number ddddddddddd ddddddddddd yywwbrrbffb lllbnnnnnnb xxx c 3rd line is the date code, backend revision and fab site 4th line is ‘CYP’ and lot code 5th line (3 characters) is COO The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. 5th line (3 characters) is COO Example Marking Format: : CY8C3246LTI-128 Line 1: CY8C3246LTI Line 2: -128 Line 3: 1125 A 04 Line 4: CYP 632770 Line 5: PHI 54 July 2017 Rev17 Packages : • QFN 68L – 8x8x mm Reference: 37-00001, Figure 58 QFN 88L Using Gold (Au) Wire Using Copper (Cu) Wire Lines 1 – 4: 11 characters per line ddddddddddd ddddddddddd yywwbrrbffb lllbnnnnnnb xxx AAA 1st and 2nd line is the marketing part number 3rd line is the date code, backend revision and fab site 4th line is ‘CYP’ and lot code Lines 1 – 4: 11 characters per line 1st and 2nd line is the marketing part number ddddddddddd ddddddddddd yywwbrrbffb lllbnnnnnnb xxx c 3rd line is the date code, backend revision and fab site 4th line is ‘CYP’ and lot code 5th line (3 characters) is COO 6th line (3 characters) is the strip ID applicable only for CML Autoline Assembled 5th line (3 characters) is COO 6th line (3 characters) is the strip ID applicable only for CML Autoline Assembled The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. Example Marking Format: : CY8CTMA884LTI-13 Line 1: CY8CTMA884L Line 2: TI-13 Line 3: 1131 C 04 Line 4: CYP 640430 Line 5: PHI Line 6: AAA 55 July 2017 Rev17 Packages : • QFN88 – 8x8 mm Reference: 37-00001, Figure 59 WLCSP 30L Using Gold (Au) Wire ddd ddd yww nnnn 1st and 2nd line (3 characters) is the marketing part number 3rd line (3 characters) is the date code – ‘yww” 4th line (4 characters) is the last 4 digit if lot code Example Marking Format: : CY8C20634-12FDXIT Line 1: CYLine 2: 634 Line 3: 949 Line 4: 3041 56 July 2017 Rev17 CY634 949 3041 Packages : • WLCSP30 – 1.85X2.31 mm Reference: 37-00001, Figure 109 WLCSP 30L Using Gold (Au) Wire dddddddddd dddddddddd dddddbyyww rrff nnnnnn 1st and 2nd line (9 characters) is the marketing part number 3rd line (9 characters) is the remaining part number and the date code 4th line (4 characters) is the backend revision fn fab site. 5th line (6 characters) is the lot code Example Marking Format: : CY8C20767-24FDXCT Line 1: CY8C20767 Line 2: -24FDXC Line 3: 1201 Line 4: A 05 Line 5: 600369 57 July 2017 Rev17 Packages : • WLCSP30 – 2.2x2.3 mm Reference: 37-00001, Figure 121 WLCSP 49L Using Gold (Au) Wire dddddddddd dddddddddd dddddddddd xxxbyyww nnnnnn Line 1 – 3 (10 characters) is the marketing part number 4th line (8 characters) is the COO and datecode 5th line (6 characters) is the lot code Example Marking Format: : CY8C20767-24FDXCT Example: Part Number: CY8CTMA300E-49FNXI Line 1: CY8CTMA300 Line 2: E-49FNXI Line 3: TWN 1207 Line 4: 601740 Note: 1. First three lines will be mark with Marketing Part numbers only. If Marketing Part number exceeds 10 characters, Mark only the first 10 characters of the marketing part number. Ignore splitting and wrap first 10 characters over the first three lines. Packages : • WLCSP49 – 3.2.2x3.2 mm 58 July 2017 Rev17 Reference: 37-00001, Figure 120 WLCSP 49L/60L/34L/DFN 14L Using Gold (Au) Wire dddddddddd dddddddddd dddddddddd xxxbyyww rrff nnnnnn Line 1 – 3 (10 characters) is the marketing part number 4th line (8 characters) is the COO and datecode 5th line (4 characters) is the backend revision and fab site 6th line (6 characters) is the lot code Packages : • WLCSP49/60 – 3.7x3.8 mm • WLCSP34 – 2.495x2.44 mm • DFN14 – 2.5x3.5 mm 59 July 2017 Rev17 Reference: 37-00001, Figure 122 WLCSP 81L/131L Using Gold (Au) Wire dddd dddddd yywwbn nnnn Using Copper (Cu) Wire 1st line (4 characters) is the marketing part number dddd dddddd yywwbn nnnn line (6 characters) is the marketing part number 2nd line (6 characters) is the date code and the first digit of the lot code 3rd c 4th line (4 characters) is the last 4 digit if lot code 1st line (4 characters) is the marketing part number 2nd line (6 characters) is the marketing part number 3rd line (6 characters) is the date code and the first digit of the lot code 4th line (4 characters) is the last 4 digit if lot code The ‘C’ beside the square mark (PbFree mark) denotes the use of copper wire. Example Marking Format: : CYWB0124ABX-FDXIT Note: Line 1: CYWB Line 2: 0124AB Line 3: 1101 6 Line 4: 0795 60 July 2017 Rev17 CYWB 0124AB 1101 6 0795 1. First two lines will be mark with Marketing Part numbers only. If Marketing Part number exceeds 10 characters, Mark only the first 10 characters of the marketing part number. Ignore splitting and wrap first 10 characters over the first two lines. Reference: 37-00001, Figure 55 WLCSP 35L/60L/72L Using Gold (Au) Wire dddddddddd dddddddddd yywwbrrffb xxxbnnnnnn 1st line (10 characters) is the marketing part number 2nd line (10 characters) is the marketing part number 3rd line (10 characters) is the date code , backend part c and Fab location 4th line (10 characters) is the country of origin, and mark lot number Reference: 37-00001 Figure 127 61 July 2017 Rev17 FRAM PARTS 62 July 2017 Rev17 CYPRESS CONFIDENTIAL – IDENTIFIER FBGA 48L Line 1: Marketing Part Number ddddddddddddddd rrnnnnn yyww xxx Line 2: rrnnnnn where: rr – BE Part rev Code (can be 1 or 2 characters) nnnnnn – Cy assembly lot# Line 3: yyww - Date Code, xxx – Country of origin Example Marking Format: : FM28V402-BGC Line 1: FM28V402-BGC Line 2: A 618477 Line 3: C 1319 TWN Reference: 63 July 2017 Rev17 37-00001, Figure 50 PIN135228 DFN 8L Line 1: Truncated Marketing Part Number dddddd nnnnnn yyww Line 2: nnnnnn - Cy assembly lot# Line 3: yyww - Date Code  3x3mm 8 lead TDFN will NOT have square mark Example Marking Format: : FM24CL64B-DG Line 1: R4L64B Line 2: 626151 Line 3: 1325 Reference: 64 July 2017 Rev17 37-00001, Figure 48 PIN135228 PDIP 8L Line 1: Marketing Part Number c dddddddddd rrnnnnnn CYPyyww C Line 2: rrnnnnnn where: rr - BE Part Rev Code (can be 1 or 2 characters) nnnnnn - Cy assembly lot# Line 3: CYPyyww where: CYP – Cypress yyww- Date Code The ‘C’ beside the square mark (Pb-Free mark) denotes the use of copper wire. Example Marking Format: FM25H20-PG Line 1: FM25H20-PG Line 2: A 624126 Line 3: CYP1325 65 July 2017 Rev17 Package: • PDIP 8L – 300 mils Reference: 37-00001, Figure 1A PIN135228 PDIP 28L Line 1: Marketing Part Number dddddddddd rryywwnnnnnn Line 2: rrYYWWnnnnnn where: rr - BE Part Rev Code (can be 1 or 2 characters) yyww - Date Code nnnnnn - Cy assembly lot# Example Marking Format: FM1608B-PG Line 1: FM1608B-PG Line 2: BA1325628365 66 Package: • PDIP 28L – 600 mils Reference: July 2017 Rev17 37-00001, Figure 3A PIN135228 EIAJ 8L Row1: Marketing Part Number dddddddd rrnnnnnn CYPyyww Row2: rrnnnnnn where: rr-BE Part rev Code (can be 1 or 2 characters) nnnnnn - Cy assembly lot# Row3: CYPyyww where: CYP – Cypress yyww - Date Code Example Marking Format: FM24V10-G Line 1: FM24V10-G Line 2: A 628492 Line 3: CYP1325 67 Package: • EIAJ 8L – 209 mils Reference: July 2017 Rev17 37-00001, Figure 34A PIN135228 SOIC 8L Line 1: Marketing Part Number ddddddddd rrnnnnnn CYPyyww Line 2: rrnnnnnn where: rr - BE Part Rev Code (can be 1 or 2 characters) nnnnnn- Cy assembly lot# n Line 3: CYPyyww where: CYP – Cypress yyww- Date Code Example Marking Format: FM24C16B-G Line 1: FM24C16B-G Line 2: A 627423 Line 3: CYP1325 68 July 2017 Rev17 Reference: PIN135228 SOIC 14L Line 1: Marketing Part Number dddddddddd rrnnnnnn CYP yyww xxx Line 2: rrnnnnnn where: rr - BE Part Rev Code (can be 1 or 2 characters) nnnnnn- Cy assembly lot# Line 3: CYP yyww xxx where: CYP – Cypress yyww – Date Code xxx – Country of origin Example Marking Format: FM33256B-G Line 1: FM33256B-G Line 2: A 614751 Line 3: CYP 1313 THA 69 July 2017 Rev17 Package: • SOIC 14 – 150 mils Reference: 37-00001, Figure 33 PIN135228 SOIC 28L Line 1: Marketing Part Number dddddddddddd rryywwnnnnnn Line 2: rryywwnnnnnn where: rr - BE Part Rev Code (can be 1 or 2 characters) yyww – Date Code nnnnnn- Cy assembly lot# Example Marking Format: : FM1608B-SG Line 1: FM1608B-SG Line 2: B 1325628495 Package: • SOIC 28 – 300 mils Reference: 70 July 2017 Rev17 37-00001, Figure 6A PIN135228 TSOP 44L Line 1: Marketing Part Number dddddddddddd rrnnnnnn yyww xxx Line 2: rrnnnnnn where: rr-BE Part rev Code (can be 1 or 2 characters) nnnnnn - Cy assembly lot Row3: yyww xxx where: yyww – Date Code xxx – Country of origin Example Marking Format: : FM28V202-TG Line 1: FM28V202-TG Line 2: A 631745 Line 3: 1331 TWN 71 July 2017 Rev17 Package: • TSOP II 44 - 435 mils Reference: 37-00001, Figure 7A PIN135228 TSOP I Line 1: Marketing Part Number dddddddddddd rrnnnnnn yyww xxx Line 2: rrnnnnnn where: rr – BE Part rev Code (can be 1 or 2 characters) nnnnnn – Cy assembly lot# Line 3: yyww xxx where: yyww – Date Code xxx – Country of origin Example Marking Format: : FM28V020-TG Line 1: FM28V020-TG Line 2: A 615067 Line 3: 1313 TWN Package: • TSOP I 28 • TSOP I 32 Reference: 72 July 2017 Rev17 37-00001, Figure 37 PIN135228 FLASH PARTS 73 July 2017 Rev17 CYPRESS CONFIDENTIAL – IDENTIFIER FBGA Logo - Spansion Logo SPANSION ® 1st line – Part number (ddddddddddddd) dddddddddddddd ywwnnnnn X coo © yy SPANSION 2nd line – Date code, die code (ywwnnnn x) 3rd line – Country of Origin (coo) 4th line – Copyright (© yy SPANSION) Example OPN: S34ML01G100BHV000 S34ML04G100BHI000 S34ML01G100BHI000 S25FL256SAGBHIA10 SPANSION ® FL256SAIHA1 552BB125 D THAILAND © 10 SPANSION Packages: VBM063 / LAD080 V2B063 / FAA064 LAA064 / LAA080 VBK048 / LAE064 FAB024 / FAC024 S25FL256SAGBHIA13 Note: 74 July 2017 Rev17 1. Date code yww: y= last digit of the year, ww= work week, nnnnn= location code, X= die code TSOP Logo - Spansion Logo SPANSION ® ddddddddddddd ywwnnnnn X © yy SPANSION 1st line – Part number (dddddddddddddddd) 2nd line – Date code, die code (ywwnnnnn x) 3rd line – Copyright (© yy SPANSION) Example OPN: S29GL064N90TFI04 S29GL128S90TFI010 S29GL032N90TFI04 S29GL256S90TFI020 S34ML01G200TFI000 S29GL256S90TFI010 S29GL256P90TFI010 S29GL128S90TFI020 SPANSION ® Package: • TSOP 48 • TSOP 56 S29GL256S90TFI02 434BB412 B © 10 SPANSION S34ML02G100TFI000 S34ML01G100TFI000 Note: 75 July 2017 Rev17 1. Date code yww: y= last digit of the year, ww= work week, nnnnn= location code, X= die code SOIC 8L 1st SPANSION ® ddddddddd ywwnn nnn X 2nd 3rd 4th 1st line – Logo line (SPANSION ®) ® line – Logo line (SPANSION ) line – Part number (ddddddddd) line – Date code (ywwnn) line – Date code, die code (nnn X) S25FL116K0XMFI040 SPANSION ® dddddddddd ywwnnnnn X © yy 3rd line - Date code, Die Code (ywwnnnnn x) 4th line - Copyright (© yy) Example OPN: Example OPN: S25FL216K0PMFI041 2nd line – Part number (ddddddddd) SPANSION ® FL116KIF4 523JJ 016 A S25FL164K0XMFI011 S25FL008A0LMFI001 S25FL016A0LMFI010 S25FL132K0XMFI041 SPANSION ® FL164KIF01 614JJ046 A © 12 S25FL032P0XMFI010 SOIC 8 – 150 mils S25FL127SABMFI103 Note: 76 1. July 2017 Rev17 Date code yww: y= last digit of the year, ww= work week, nnnnn= location code, X= die code SOC 8 - 208 mils SOIC 16L SO3016 / SL3016 Logo - Spansion Logo SPANSION ® ddddddddddddd ywwnnnnn X © yy SPANSION 1st line – Part number (ddddddddddddd) 2nd line – Date code, die code (ywwnnnn X) 3rd line – Copyright (© yy SPANSION) Example OPN: S25FL256SAGMFIG01 S25FL512SAGMFI011 S25FL256SAGMFI000 SPANSION ® FL128SAMFG0 621QQ071 A © 11 SPANSION S25FL128SAGMFI003 S25FL128SAGMFMG00 S25FL064P0XMFI001 Note: 77 1. July 2017 Rev17 Date code yww: y= last digit of the year, ww= work week, nnnnn= location code, X= die code USON/WSON Package code: Logo - SPANSION ® WNA008 / UNE008 / WNF008 / WNG008 / WNH008 1st line – Part number (dddddddddddd) SPANSION ® ddddddddddd ywwnnnnn X coo © yy 2nd line – Date code, die code (ywwnnnnn X) 3rd line – Country of Origin (coo) 4th line – Copyright (© yy) Example OPN: S25FS256SAGNFI001 S25FS256SAGNFI003 S25FS512SAGNFI001 SPANSION ® FL128SAIF00 622QQ009 A TAIWAN © 11 S25FS512SAGNFI003 Note: 78 1. July 2017 Rev17 Date code yww: y= last digit of the year, ww= work week, nnnnn= location code Package: • WNA008 • UNE008 • WF008 • WNG008 • WNH008 PLCC 32L Logo - Spansion Logo 1st line – Part number (ddddddddd) SPANSION ® ddddddddd -dddd ywwnnnnn X © yyyy ZZZ PL032 2nd line – Part number (extended) (-ddddd) 3rd line – Date code, die code (ywwnnnnn X) 4th line – Copyright (© yyyy ZZZ) Example OPN: AM29F010B-120JD AM29F040B-120PD SPANSION ® AM29F010B -120JD 610WB743 G © 1998 AMD Note: 79 1. July 2017 Rev17 Date code yww: y= last digit of the year, ww= work week, nnnnn= location code, X= die code PQFP 80L Logo - Spansion Logo PQR080 SPANSION® dddddddddddddddd ywwnnnnn XX © cc SPANSION 1st line – Part number (dddddddddddddd) 2nd line – Date code, die code (ywwnnnnn X) 3rd line – Copyright (© cc SPANSION) Example OPN: S29CD016J0MQFM01 S29CD032J0MQFI000 SPANSION® S29CD016J0MQFM01 625WB358 M © 04 SPANSION Note: 80 1. July 2017 Rev17 Date code yww: y= last digit of the year, ww= work week, nnnnn= location code, X= die code IoT PARTS 81 July 2017 Rev17 CYPRESS CONFIDENTIAL – IDENTIFIER FBGA/LGA/FCBGA/QFN P1Bddddddddd ddddddddddd YwwBRRBFF lllBNNNNNN xxxbbsqbc Line 1: Pin1dot Marketing Part Number (1st 8 letter) Line 2: Marketing Part Number remaining Line 3: Date code, Backend Part Rev, Fab location Line 4: CYP, assembly lot number Line 5: COO, Pb Free Square, C for Cu wire No: “C” Marking is required for FCFBGA/RFCFBGA. Note: • B : Blank space • P1 : Pin 1 • D: Marketing Part Number • YYWW: YY Datecode, WW Work Week • RR: Backend Part Number • FF: Fab location • LLL: CYP Example Marking Format: CYW20734UA1KFFB3G. Packages: (mm) • FBGA64 – 7X7 • FBGA81 – 8X8 • FBGA – 9X9, 11X11 • LGA – 6.5X6.5 • FCBGA - 7X9, 8.5X8.5, 10X10, 7X6 • QFN56, QFN60 – 7X7 • QFN68 – 8X8 • QFN52 – 8X7 • QFN76 – 9X9 • QFN88 – 10X10 82 July 2017 Rev17 Reference: 37-00001 QFN 40L P1Bddddddddd ddddddddddd YwwBRRBFF lllBNNNNNN xxxbbsqbc Line 1: Pin1dot Marketing Part Number (1st 7 letter) Line 2: Marketing Part Number remaining Line 3: Date code, Backend Part Rev, Fab location Line 4: CYP, assembly lot number Line 5: COO, Pb Free Square, C for Cu wire . Note: • B : Blank space • P1 : Pin 1 • D: Marketing Part Number • YYWW: YY Datecode, WW Work Week • RR: Backend Part Number • FF: Fab location • LLL: CYP Example Marking Format: CYW20736A1KWBG Package: (mm) • QFN40 – 6X6 83 July 2017 Rev17 Reference: 37-00001 FBGA P1Bddddddddd ddddddddddd YwwBRRB FFBNNNNNN xxxbbsqbc Line 1: Pin1dot Marketing Part Number (1st 6 letter) Line 2: Marketing Part Number remaining Line 3: Date code, Backend Part Rev Line 4: Fab location, assembly lot number Line 5: COO, Pb Free Square, C for Cu wire . Note: • B : Blank space • P1 : Pin 1 • D: Marketing Part Number • YYWW: YY Datecode, WW Work Week • RR: Backend Part Number • FF: Fab location Example Marking Format: CYW20733A2KML1G Package: (mm) • FBGA66 – 5.5X4.5 • FBGA72 – 5.5X5 84 July 2017 Rev17 Reference: 37-00001 FBGA/QFN P1Bddddddddd ddddddddddd DDBYww NNNNNN xxxbbsqbc Line 1: Pin1dot Marketing Part Number (1st 5 letter) Line 2: Marketing Part Number remaining 8 letters Line 3: Marketing Part Number remaining, date code Line 4: Assembly lot number Line 5: COO, Pb Free Square, C for Cu wire . Note: • B : Blank space • P1 : Pin 1 • D: Marketing Part Number • YYWW: YY Date code, WW Work Week • RR: Backend Part Number • FF: Fab location Example Marking Format: CYW2046SB1KUFBG Packages: (mm) • FBGA65 – 5x5 • QFN32/QFN40 – 5X5 85 July 2017 Rev17 Reference: 37-00001 FBGA 65 P1Bddddddddd ddddddddddd DD YwwbNNNNNN xxxbbsqbc Line 1: Pin1dot Marketing Part Number (1st 4 letter) Line 2: Marketing Part Number remaining 7 letters Line 3: Marketing Part Number remaining Line 4: Date code Assembly lot number Line 5: COO, Pb Free Square, C for Cu wire . Note: • B : Blank space • P1 : Pin 1 • D: Marketing Part Number • YYWW: YY Datecode, WW Work Week • RR: Backend Part Number • FF: Fab location Example Marking Format: CYW20713A1KUFBXG Packages: (mm) • FBGA65 – 4.5X4 86 July 2017 Rev17 Reference: 37-00001 FCBGA 49 P1Bddddddddd ddddddddddd DD YwwbNNNNNN Line 1: Pin1dot Marketing Part Number (1st 4 letter) Line 2: Marketing Part Number remaining 7 letters Line 3: Marketing Part Number remaining Line 4: Date code Assembly lot number . Note: • B : Blank space • P1 : Pin 1 • D: Marketing Part Number • YYWW: YY Datecode, WW Work Week • RR: Backend Part Number • FF: Fab location Example Marking Format: CYW20704UA1KFFB1G Packages: (mm) • FCBGA49 – 4.5X4 87 July 2017 Rev17 Reference: 37-00001 LGA P1Bddddddddd ddddddddddd DD NNNNNN Line 1: Pin1dot Marketing Part Number (1st 3 letters) Line 2: Marketing Part Number remaining 5 letters Line 3: Marketing Part Number remaining Line 4: Assembly lot number . Example Marking Format: CYW20732Y CYW 20732 Y 633 842 88 July 2017 Rev17 Packages: (mm) • LGA27: 3.2X3.5 Note: • B : Blank space • P1 : Pin 1 • D: Marketing Part Number • YYWW: YY Datecode, WW Work Week • RR: Backend Part Number • FF: Fab location WLCSP P1Bddddddddd dddddd YwwBRRBFF NNNNNN xxxbbsqbc Line 1: Pin1dot Marketing Part Number (1at 8 letters) Line 2: Marketing Part Number Line 3: Date code, Backend Part Rev, Fab location Line 4: CYP assembly lot number Line 5: COO, Pb Free Square Line 6: CC-RR for die location Note: • B : Blank space • P1 : Pin 1 • D: Marketing Part Number • YYWW: YY Datecode, WW Work Week • RR: Backend Part Number • FF: Fab location • LLL: CYP Example Marking Format: CYW43241XFKWBG Packages: (mm) • WLCSP : 6.51X5.81, 6.57X5.62, 5.73X5.62, 5.88X4.4 4.87X7.67, 4.97X7.5, 4.97X7.7, 4.47X5.67, 4.9X5.84 4.91X5.8, 4.47X5.27, 4.89X5.33, 4.87X5.41, 2.87X4.87 3.01X2.5 89 July 2017 Rev17 Reference: 37-00001 WLCSP P1Bddddddddd dddddd YwwBRRB FFBNNNNNN xxxbbsq Line 1: Pin1dot Marketing Part Number (1st 7 letters) Line 2: Marketing Part Number Line 3: Date code, Backend Part Rev Line 4: Fab location assembly lot number Line 5: COO, Pb Free Square Line 6: CC-RR for die location ID Note: • B : Blank space • P1 : Pin 1 • D: Marketing Part Number • YYWW: YY Datecode, WW Work Week • RR: Backend Part Number • FF: Fab location • LLL: CYP Example Marking Format: CYW20736A1KWBG Packages: (mm) • WLCSP69: 4.53X2.93 • WLCSP/WLCSP36: 2.51X2.77 90 July 2017 Rev17 Reference: 37-00001 WLCSP P1Bddddddddd dddddd YwwBRRB FFBNNNNNN xxxbbsq Line 1: Pin1dot Marketing Part Number (1st 5 letters) Line 2: Marketing Part Number Line 3: Date code, COO Line 4: Assembly lot number Line 5: CC-RR for die ID location Note: • B : Blank space • P1 : Pin 1 • D: Marketing Part Number • YYWW: YY Datecode, WW Work Week • RR: Backend Part Number • FF: Fab location • LLL: CYP Example Marking Format: CYW20736A1KWBG Packages: (mm) • WLCSP80: 2.16X2.18 91 July 2017 Rev17 Reference: 37-00001 HISTORY PAGE Owner 92 July 2017 Rev17 Description of Change Rev. 7 JARG 1. 2. Updated Slide 38 title from BGA 36 – BGA48 to BGA36, BGA38, BGA60 AND BGA121 Added Example 2 for BGA121 package Rev. 8 HLR 1. Changed RAMTRON name to FRAM. 2. Added the marking format for uFBGA 48. Rev. 9 HLR Corrected the position of leads for FRAM- TSOPI 28L and TSOPI 32L Rev. 10 HLR Added the marking format for 60 balls WLCSP and 35 balls WLCSP based on Fig. 127. Added 34 balls WLCSP and 14L DFN based on Fig. 122. Rev. 11 MRB Align the marking format for SOJ28-44 (page 11) based from Figure 9 on Final Mark Specification (37-00001) Deleted and replaced the example marking format for TSOP 28 - TSOP 48 (page 20) from 4 liners to 3 liners based from Figure 27 on Final Mark Format Specification (37-00001) Rev. 12 MRB Rewrite and pattern the marking explanation of TSOP 28 to TSOP 48 (page 20) from TSOP 32 (page 21) Rev. 13 MRB 1. 2. 3. 4. Rev. 14 MRB 1. Added Legacy Spansion Marking Format 2. Added package size on page 4 and corrected the reference from Figure 45 to Figure 33 3. Added package size on page 66 and corrected the reference from Figure 45A to Figure 34A Updated Cypress Logo Added available package width size based on spec 37-00001 Deleted Figure 50 on page 67 and Figure 52 on page 63 to align in spec 37-00001 Updated character lines from 4 to 3 line on page 22 based on the example marking format HISTORY PAGE Owner 93 July 2017 Rev17 Description of Change Rev. 15 HLR Changed the Unit Orientation Format for TSSOP 8. Rev. 16 MRB Added IOT Marking format Removed sample word and rewrite/align all ftext Changed to new template Rev 17 MRB Corrected the example marking format for LGA 27 (page 88) End of Memo 94 July 2017 Rev17 CYPRESS CONFIDENTIAL – IDENTIFIER