FS150R12N2T7BPSA2

FS150R12N2T7 EconoPACK™2 module EconoPACK™2 module with TRENCHSTOP™IGBT7 and Emitter Controlled 7 diode and NTC Features • Electrical features - VCES = 1200 V - IC nom = 150 A / ICRM = 300 A - Low VCEsat - Overload operation up to 175°C - TRENCHSTOPTM IGBT7 • Mechanical features - Integrated NTC temperature sensor - High power and thermal cycling capability - Solder contact technology - Al2O3 substrate with low thermal resistance - Copper base plate Potential applications • Motor drives • Auxiliary inverters • Servo drives Product validation • Qualified for industrial applications according to the relevant tests of IEC 60747, 60749 and 60068 Description J Datasheet www.infineon.com Please read the Important Notice and Warnings at the end of this document 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module Table of contents Table of contents Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Potential applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 IGBT, Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 Diode, Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 NTC-Thermistor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 5 Characteristics diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6 Circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7 Package outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 8 Module label code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Datasheet 2 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module 1 Package 1 Package Table 1 Insulation coordination Parameter Symbol Note or test condition Isolation test voltage VISOL RMS, f = 50 Hz, t = 1 min Material of module baseplate Values Unit 2.5 kV Cu Internal Isolation basic insulation (class 1, IEC 61140) Al2O3 Creepage distance dCreep terminal to heatsink 10.0 mm Clearance dClear terminal to heatsink 7.5 mm Comparative tracking index CTI RTI Elec. RTI Table 2 > 200 housing Symbol Note or test condition Min. Stray inductance module Module lead resistance, terminals - chip Storage temperature LsCE RCC'+EE' M Weight G Table 3 TC=25°C, per switch Tstg Mounting torque for modul mounting 2 Values Unit Typ. Max. 25 nH 1.8 mΩ -40 125 °C 3 6 Nm - Mounting according to M5, Screw valid application note 180 g Values Unit Tvj = 25 °C 1200 V TC = 80 °C 150 A 300 A ±20 V The current under continuous operation is limited to 50A rms per connector pin. IGBT, Inverter Maximum rated values Parameter Symbol Note or test condition Collector-emitter voltage VCES Continous DC collector current ICDC Tvj max = 175 °C Repetitive peak collector current ICRM tP = 1 ms Gate-emitter peak voltage VGES Datasheet °C Characteristic values Parameter Note: 140 3 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module 2 IGBT, Inverter Table 4 Characteristic values Parameter Symbol Note or test condition Values Min. Collector-emitter saturation voltage Gate threshold voltage Gate charge VCE sat VGEth QG IC = 150 A, VGE = 15 V Unit Typ. Max. Tvj = 25 °C 1.55 1.80 V Tvj = 125 °C 1.69 Tvj = 175 °C 1.77 6.45 V IC = 3.5 mA, VCE = VGE, Tvj = 25 °C VGE = ±15 V, VCE = 600 V 5.15 5.80 2.5 µC 1 Ω Internal gate resistor RGint Tvj = 25 °C Input capacitance Cies f = 100 kHz, Tvj = 25 °C, VCE = 25 V, VGE = 0 V 30.1 nF Reverse transfer capacitance Cres f = 100 kHz, Tvj = 25 °C, VCE = 25 V, VGE = 0 V 0.105 nF Collector-emitter cut-off current ICES VCE = 1200 V, VGE = 0 V Gate-emitter leakage current IGES VCE = 0 V, VGE = 20 V, Tvj = 25 °C Turn-on delay time (inductive load) tdon IC = 150 A, VCE = 600 V, VGE = ±15 V, RGon = 3.5 Ω Rise time (inductive load) Turn-off delay time (inductive load) Fall time (inductive load) Turn-on energy loss per pulse Turn-off energy loss per pulse SC data Datasheet tr tdoff tf Eon Eoff ISC Tvj = 25 °C Tvj = 25 °C 0.157 Tvj = 125 °C 0.170 Tvj = 175 °C 0.177 Tvj = 25 °C 0.065 Tvj = 125 °C 0.071 Tvj = 175 °C 0.074 Tvj = 25 °C 0.336 Tvj = 125 °C 0.414 Tvj = 175 °C 0.457 Tvj = 25 °C 0.100 Tvj = 125 °C 0.189 Tvj = 175 °C 0.251 IC = 150 A, VCE = 600 V, Lσ = 35 nH, VGE = ±15 V, RGon = 3.5 Ω, di/dt = 1500 A/µs (Tvj = 175 °C) Tvj = 25 °C 21.1 Tvj = 125 °C 29.9 Tvj = 175 °C 33.3 IC = 150 A, VCE = 600 V, Lσ = 35 nH, VGE = ±15 V, RGoff = 3.5 Ω, dv/dt = 3250 V/µs (Tvj = 175 °C) Tvj = 25 °C 9.65 Tvj = 125 °C 15.1 Tvj = 175 °C 18.6 VGE ≤ 15 V, VCC = 800 V, VCEmax=VCES-LsCE*di/dt tP ≤ 8 µs, Tvj = 150 °C 480 tP ≤ 7 µs, Tvj = 175 °C 450 IC = 150 A, VCE = 600 V, VGE = ±15 V, RGon = 3.5 Ω IC = 150 A, VCE = 600 V, VGE = ±15 V, RGoff = 3.5 Ω IC = 150 A, VCE = 600 V, VGE = ±15 V, RGoff = 3.5 Ω 4 0.0012 mA 100 nA µs µs µs µs mJ mJ A 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module 3 Diode, Inverter Table 4 Characteristic values (continued) Parameter Symbol Note or test condition Values Min. Thermal resistance, junction to case RthJC per IGBT Thermal resistance, case to heatsink RthCH per IGBT, λgrease= 1 W/(m*K) Temperature under switching conditions Tvj op Note: 3 Max. 0.293 0.129 -40 K/W K/W 175 °C Tvj op > 150°C is allowed for operation at overload conditions. For detailed specifications, please refer to AN 2018-14. Diode, Inverter Table 5 Maximum rated values Parameter Symbol Note or test condition Repetitive peak reverse voltage VRRM Continous DC forward current IF Repetitive peak forward current I2t - value Table 6 IFRM I2t Values Unit 1200 V 150 A 300 A Tvj = 125 °C 2700 A²s Tvj = 175 °C 2250 Tvj = 25 °C tP = 1 ms tP = 10 ms, VR = 0 V Characteristic values Parameter Symbol Note or test condition Values Min. Forward voltage Peak reverse recovery current Recovered charge Datasheet Typ. Unit VF IRM Qr Unit Typ. Max. Tvj = 25 °C 1.72 2.10 Tvj = 125 °C 1.59 Tvj = 175 °C 1.52 VR = 600 V, IF = 150 A, VGE = -15 V, -diF/dt = 1500 A/µs (Tvj = 175 °C) Tvj = 25 °C 52.4 Tvj = 125 °C 68.8 Tvj = 175 °C 79.6 VR = 600 V, IF = 150 A, VGE = -15 V, -diF/dt = 1500 A/µs (Tvj = 175 °C) Tvj = 25 °C 15.1 Tvj = 125 °C 24.2 Tvj = 175 °C 31.1 IF = 150 A, VGE = 0 V 5 V A µC 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module 4 NTC-Thermistor Table 6 Characteristic values (continued) Parameter Symbol Note or test condition Values Min. Reverse recovery energy Erec VR = 600 V, IF = 150 A, VGE = -15 V, -diF/dt = 1500 A/µs (Tvj = 175 °C) Tvj = 25 °C 4.98 Tvj = 125 °C 7.28 Tvj = 175 °C 9.12 Thermal resistance, junction to case RthJC per diode Thermal resistance, case to heatsink RthCH per diode, λgrease= 1 W/(m*K) Temperature under switching conditions Tvj op Note: 4 Typ. Unit Max. mJ 0.454 0.140 -40 K/W K/W 175 °C Tvj op > 150°C is allowed for operation at overload conditions. For detailed specifications, please refer to AN 2018-14. NTC-Thermistor Table 7 Characteristic values Parameter Symbol Note or test condition Values Min. Rated resistance R25 Deviation of R100 ΔR/R Power dissipation P25 TNTC = 25 °C Typ. Unit Max. 5 TNTC = 100 °C, R100 = 493 Ω -5 TNTC = 25 °C kΩ 5 % 20 mW B-value B25/50 R2 = R25 exp[B25/50(1/T2-1/(298,15 K))] 3375 K B-value B25/80 R2 = R25 exp[B25/80(1/T2-1/(298,15 K))] 3411 K B-value B25/100 R2 = R25 exp[B25/100(1/T2-1/(298,15 K))] 3433 K Note: Datasheet Specification according to the valid application note. 6 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module 5 Characteristics diagrams 5 Characteristics diagrams output characteristic (typical), IGBT, Inverter IC = f(VCE) VGE = 15 V output characteristic (typical), IGBT, Inverter IC = f(VCE) Tvj = 175 °C 300 300 250 250 200 200 150 150 100 100 50 50 0 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0.0 transfer characteristic (typical), IGBT, Inverter IC = f(VGE) VCE = 20 V 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 switching losses (typical), IGBT, Inverter E = f(IC) RGoff = 3.5 Ω, RGon = 3.5 Ω, VGE = ±15 V, VCE = 600 V 300 140 120 250 100 200 80 150 60 100 40 50 20 0 0 5 Datasheet 6 7 8 9 10 11 12 13 0 7 50 100 150 200 250 300 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module 5 Characteristics diagrams switching losses (typical), IGBT, Inverter E = f(RG) VGE = ±15 V, IC = 150 A, VCE = 600 V switching times (typical), IGBT, Inverter t = f(IC) RGoff = 3.5 Ω, RGon = 3.5 Ω, VGE = ±15 V, VCE = 600 V, Tvj = 175 °C 10 160 140 120 1 100 80 60 0.1 40 20 0 0.01 0 5 10 15 20 25 30 35 0 switching times (typical), IGBT, Inverter t = f(RG) VGE = ±15 V, IC = 150 A, VCE = 600 V, Tvj = 175 °C 50 100 150 200 250 300 Voltage slope (typical), IGBT, Inverter dv/dt = f(RG) IC = 150 A, VCE = 600 V, VGE = ±15 V, Tvj = 25 °C 10 8 7 6 1 5 4 3 0.1 2 1 0 0.01 0 Datasheet 5 10 15 20 25 30 35 0 8 5 10 15 20 25 30 35 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module 5 Characteristics diagrams transient thermal impedance , IGBT, Inverter Zth = f(t) reverse bias safe operating area (RBSOA), IGBT, Inverter IC = f(VCE) RGoff = 3.5 Ω, VGE = ±15 V, Tvj = 175 °C 1 350 300 250 200 0.1 150 100 50 0 0.01 0.001 0.01 0.1 1 0 10 capacity characteristic (typical), IGBT, Inverter C = f(VCE) f = 100 kHz, VGE = 0 V, Tvj = 25 °C 200 400 600 800 1000 1200 1400 gate charge characteristic (typical), IGBT, Inverter VGE = f(QG) IC = 150 A, Tvj = 25 °C 1000 15 10 100 5 10 0 1 -5 0.1 -10 -15 0.01 0 Datasheet 10 20 30 40 50 60 70 80 90 100 0.0 9 0.5 1.0 1.5 2.0 2.5 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module 5 Characteristics diagrams forward characteristic (typical), Diode, Inverter IF = f(VF) switching losses (typical), Diode, Inverter Erec = f(IF) RG = 3.5 Ω, VR = 600 V 300 12 250 10 200 8 150 6 100 4 50 2 0 0 0.0 0.5 1.0 1.5 2.0 2.5 0 switching losses (typical), Diode, Inverter Erec = f(RG) IF = 150 A, VR = 600 V 50 100 150 200 250 300 transient thermal impedance , Diode, Inverter Zth = f(t) 1 12 10 8 6 0.1 4 2 0 0 Datasheet 5 10 15 20 25 30 0.01 0.001 35 10 0.01 0.1 1 10 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module 5 Characteristics diagrams temperature characteristic (typical), NTC-Thermistor R = f(TNTC) 100000 10000 1000 100 10 0 Datasheet 25 50 75 100 125 150 175 11 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module 6 Circuit diagram 6 Circuit diagram J Figure 2 Datasheet 12 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module 7 Package outlines 7 Package outlines Infineon Figure 3 Datasheet 13 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module 8 Module label code 8 Module label code Module label code Code format Data Matrix Barcode Code128 Encoding ASCII text Code Set A Symbol size 16x16 23 digits Standard IEC24720 and IEC16022 IEC8859-1 Code content Content Module serial number Module material number Production order number Date code (production year) Date code (production week) Digit 1–5 6 - 11 12 - 19 20 – 21 22 – 23 Example 71549 142846 55054991 15 30 Example 71549142846550549911530 71549142846550549911530 Figure 4 2 Datasheet 14 1.00 2021-08-02 FS150R12N2T7 EconoPACK™2 module Revision history Revision history Document revision Date of release Description of changes V1.0 2019-08-21 Target datasheet 1.00 2021-08-02 Final datasheet Datasheet 15 1.00 2021-08-02 Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2021-08-02 Published by Infineon Technologies AG 81726 Munich, Germany © 2021 Infineon Technologies AG All Rights Reserved. Do you have a question about any aspect of this document? Email: erratum@infineon.com Document reference IFX-AAY214-002 IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. Please note that this product is not qualified according to the AEC Q100 or AEC Q101 documents of the Automotive Electronics Council. WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.