IR25601STRPBF

IR25601SPBF Half-Bridge Driver Features             Product Summary Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dV/dt immune Gate drive supply range from 10 to 20V Under voltage lockout for both channels 3.3V, 5V and 15V input logic compatible Cross-conduction prevention logic Internally set dead-time (100ns) Output in phase with input Matched propagation delay for both channels Lower di/dt gate driver for better noise immunity VOFFSET 600V max. IO+/- 60 mA / 130 mA VOUT 10 – 20V Delay Matching 50ns Ton/off (typ.) 220 & 220 ns Internal Dead time 100 ns Package Options Description The IR25601 is a high voltage, high speed power MOSFET and IGBT driver with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output driver features a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts. 8 Lead SOIC Ordering Information Standard Pack Base Part Number Package Type Form Quantity IR25601SPBF SO8N Tube 95 IR25601SPBF SO8N Tape and Reel 2500 1 www.irf.com © 2013 International Rectifier Orderable Part Number IR25601SPBF IR25601STRPBF March 26, 2013 IR25601SPBF Typical Connection Diagram 2 www.irf.com © 2013 International Rectifier March 26, 2013 IR25601SPBF Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol VB VS VHO VCC VLO VIN dVs/dt Definition High side floating supply absolute voltage High side floating supply offset voltage High side floating output voltage Low side and logic fixed supply voltage Low side output voltage Logic input voltage (HIN & LIN) Allowable offset supply voltage transient — VCC + 0.3 50 V/ns PD Package power dissipation @ T A ≤ +25°C — 0.625 W Thermal resistance, junction to ambient — 200 °C/W Junction temperature Storage temperature Lead temperature (soldering, 10 seconds) — -55 — 150 150 300 °C RthJA TJ TS TL Min. -0.3 Max. 625 Units VB - 25 VS - 0.3 -0.3 -0.3 -0.3 VB + 0.3 VB + 0.3 25 VCC + 0.3 V Recommended Operating Conditions For proper operation the device should be used within the recommended conditions. The VS offset rating is tested with all supplies biased at 15V differential. Symbol VB VS VHO VCC VLO VIN TA Definition High side floating supply absolute voltage High side floating supply offset voltage High side floating output voltage Low side and logic fixed supply voltage Low side output voltage Logic input voltage (HIN, LIN) Ambient temperature Min. Max. VS + 10 † VS + 20 600 VS 10 VB 20 0 0 VCC VCC 125 -40 Units V °C † Logic operational for VS of -5 to +600V. Logic state held for VS of -5V to -VBS. (Please refer to Design Tip DT97-3 for more details). 3 www.irf.com © 2013 International Rectifier March 26, 2013 IR25601SPBF Dynamic Electrical Characteristics VBIAS (VCC, VBS) = 15V, CL = 1000 pF and TA = 25°C unless otherwise specified. Symbol Definition Min. Typ. Max. Units Test Conditions ton Turn-on propagation delay 120 220 320 VS = 0V toff Turn-off propagation delay 130 220 330 VS = 0Vor 600V tr tf DT MT Turn-on rise time Turn-off fall time Dead time Delay matching, HS & LS turn-on/off 60 20 80 — 200 100 100 — 300 170 190 50 ns Static Electrical Characteristics VBIAS (VCC, VBS) = 15V and TA = 25°C unless otherwise specified. The VIN, VTH and IIN parameters are referenced to COM. The VO and IO parameters are referenced to COM and are applicable to the respective output leads: HO and LO. Symbol VIH VIL VOH VOL ILK IQBS IQCC IIN+ IINVCCUV+ VBSUV+ VCCUVVBSUVVCCUVH VBSUVH IO+ IO- 4 Definition Min. Typ. Max. 2.3 — — — — 20 50 — — — — — — — 60 120 5 1.0 — 0.8 2.8 1.2 50 150 240 40 2.0 VCC and VBS supply undervoltage positive going threshold 8 8.9 9.8 VCC supply undervoltage negative going threshold 7.4 8.2 9 0.3 0.7 — 60 — — 130 — — Logic ―1‖ input voltage Logic ―0‖ input voltage High level output voltage, VBIAS - VO Low level output voltage, VO Offset supply leakage current Quiescent VBS supply current Quiescent VCC supply current Logic ―1‖ input bias current Logic ―0‖ input bias current VCC supply undervoltage lockout hysteresis Output high short circuit pulsed current Output low short circuit pulsed current www.irf.com © 2013 International Rectifier Units Test Conditions V Io = 20mA μA VB = VS = 600V VIN = 0V or 5V VIN = 0V or 5V VIN = 5V VIN = 0V V mA VO = 0V PW ≤ 10 μs VO = 15V PW ≤ 10 μs March 26, 2013 IR25601SPBF Functional Block Diagram 5 www.irf.com © 2013 International Rectifier March 26, 2013 IR25601SPBF Lead Definitions Symbol Description HIN LIN VB HO Logic input for high side gate driver output Logic input for low side gate driver output High side floating supply High side gate drive output High side floating supply return Low side supply voltage Low side gate drive output Low side return VS VCC LO COM Lead Assignments 1 LIN VB 8 2 HIN HO 7 3 VCC VS 6 4 COM LO 5 6 www.irf.com © 2013 International Rectifier March 26, 2013 IR25601SPBF Application Information and Additional Details Figure 1. Input/Output Functionality Diagram Figure 2. Switching Time Waveforms Figure 3. Internal Deadtime Timing 7 www.irf.com © 2013 International Rectifier March 26, 2013 IR25601SPBF Package Details 8 www.irf.com © 2013 International Rectifier March 26, 2013 IR25601SPBF Tape and Reel Details LOADED TAPE FEED DIRECTION A B H D F C NOTE : CONTROLLING DIMENSION IN MM E G CARRIER TAPE DIMENSION FOR 8SOICN Metric Imperial Code Min Max Min Max A 7.90 8.10 0.311 0.318 B 3.90 4.10 0.153 0.161 C 11.70 12.30 0.46 0.484 D 5.45 5.55 0.214 0.218 E 6.30 6.50 0.248 0.255 F 5.10 5.30 0.200 0.208 G 1.50 n/a 0.059 n/a H 1.50 1.60 0.059 0.062 F D C B A E G H REEL DIMENSIONS FOR 8SOICN Metric Code Min Max A 329.60 330.25 B 20.95 21.45 C 12.80 13.20 D 1.95 2.45 E 98.00 102.00 F n/a 18.40 G 14.50 17.10 H 12.40 14.40 9 www.irf.com Imperial Min Max 12.976 13.001 0.824 0.844 0.503 0.519 0.767 0.096 3.858 4.015 n/a 0.724 0.570 0.673 0.488 0.566 © 2013 International Rectifier March 26, 2013 IR25601SPBF Part Marking Information IRxxxxx Part number YWW ? Date code Pin 1 Identifier ? XXXX ? MARKING CODE P Lead Free Released Non-Lead Free Released 10 www.irf.com IR logo © 2013 International Rectifier Lot Code (Prod mode – 4 digit SPN code) Assembly site code Per SCOP 200-002 March 26, 2013 IR25601SPBF Qualification Information† †† Industrial (per JEDEC JESD 47) Comments: This family of ICs has passed JEDEC’s Industrial qualification. IR’s Consumer qualification level is granted by extension of the higher Industrial level. ††† MSL2 (per IPC/JEDEC J-STD-020) Yes Qualification Level Moisture Sensitivity Level RoHS Compliant † †† Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. ††† Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change without notice. This document supersedes and replaces all information previously supplied. For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 11 www.irf.com © 2013 International Rectifier March 26, 2013