IR25603SPBF-IR

IR25603(S)PBF Self-Oscillating Half-Bridge Driver Features               Product Summary Floating channel designed for bootstrap operation Integrated 600 V half-bridge gate driver 15.6 V zener clamp on Vcc True micropower start up Tighter initial dead time control Low temperature coefficient dead time Shutdown feature (1/6th Vcc) on CT pin Increased undervoltage lockout Hysteresis (1 V) Lower power level-shifting circuit Constant LO, HO pulse widths at startup Lower di/dt gate driver for better noise immunity Low side output in phase with RT Excellent latch immunity on all inputs and outputs ESD protection on all leads VOFFSET 600 V max. Duty Cycle 50% Tr / Tf 80 ns / 40 ns VCLAMP 15.6 V Dead time (typ.) 1.2 µs Io+/Io- (typ.) 180 mA / 260 mA Package Options Description The IR25603(S) incorporates a high voltage half-bridge gate driver with a front end oscillator similar to the industry standard CMOS 555 timer. A shutdown feature has been designed into the CT pin, so that both gate driver outputs can be disabled using a low voltage control signal. In addition, the gate driver output pulse widths are the same once the rising undervoltage lockout threshold on Vcc has been reached, resulting in a more stable profile of frequency vs time at startup. Special attention has been paid to maximizing the latch immunity of the device and providing comprehensive ESD protection on all pins. 8 Lead SOIC 8 Lead PDIP Ordering Information Base Part Number Package Type IR25603SPBF Standard Pack Form Quantity SO8N Tube 95 IR25603SPBF SO8N Tape and Reel 2500 IR25603PBF PDIP8 Tube 50 1 www.irf.com © 2014 International Rectifier Orderable Part Number IR25603SPBF IR25603STRPBF IR25603PBF January 17, 2014 IR25603(S)PBF Typical Connection Diagram 2 www.irf.com © 2014 International Rectifier January 17, 2014 IR25603(S)PBF Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM, all currents are defined positive into any lead. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol VB VS VHO VLO VRT VCT ICC IRT dVs/dt PD RthJA TJ TS TL Definition High side floating absolute voltage High side floating supply offset voltage High side floating output voltage Low side output voltage RT pin voltage CT pin voltage Supply current† RT pin current Allowable offset supply voltage transient 8 lead PDIP Package power dissipation @ TA ≤ 8 lead SOIC +25°C 8 lead PDIP Thermal resistance, junction to 8 lead SOIC ambient Junction temperature Storage temperature Lead temperature (soldering, 10 seconds) Min. -0.3 Max. 625 VB - 25 VS - 0.3 -0.3 -0.3 -0.3 VB + 0.3 VB + 0.3 VCC + 0.3 VCC + 0.3 VCC + 0.3 25 5 50 1 0.625 125 200 150 150 300 — -5 — — — — — — -55 — Units V mA V/ns W °C/W °C Recommended Operating Conditions For proper operation the device should be used within the recommended conditions. The VS offset rating is tested with all supplies biased at 15V differential. Symbol VB VS VCC ICC TA Definition High side floating supply absolute voltage Steady state high side floating supply offset voltage Supply voltage Supply current Ambient temperature Min. Max. Units VCC – 0.7 †† 10 VCLAMP 600 VCLAMP V ††† -40 5 125 mA °C † This IC contains a zener clamp structure between the chip V CC and COM which has a nominal breakdown voltage of 15.6V. Please note that this supply pin should not be driven by a DC, low impedance power source greater than the VCLAMP specified in the Electrical Characteristics section. †† Care should be taken to avoid output switching conditions where the VS node flies inductively below ground by more than 5V. ††† Enough current should be supplied to the VCC pin of the IC to keep the internal 15.6V zener diode clamping the voltage at this pin. 3 www.irf.com © 2014 International Rectifier January 17, 2014 IR25603(S)PBF Recommended Component Values Symbol RT Component Timing resistor value Min. 10 Max. — Units kΩ CT CT pin capacitor value 330 — pF IR25603 RT vs. Frequency 4 www.irf.com © 2014 International Rectifier January 17, 2014 IR25603(S)PBF Electrical Characteristics VBIAS (VCC, VBS) = 12V, CL = 1000 pF, CT = 1nF and TA = 25°C unless otherwise specified. Low Voltage Supply Characteristics Symbol VCCUV+ VCCUVVCCUVH IQCCUV IQCC VCLAMP Definition VCC supply undervoltage positive going threshold VCC supply undervoltage negative going threshold VCC undervoltage hysteresis Micropower startup VCC supply current Quiescent VCC supply current VCC zener clamp voltage Min. Typ. Max. Units Test Conditions 8.1 9.0 9.9 7.2 8.0 8.8 0.5 1.0 1.5 — 75 150 — 14.4 500 15.6 950 16.8 V ICC = 5mA Min. Typ. Max. Units Test Conditions — 0 10 — 30 50 — 4.0 5.0 V VCC = VCCUV+ + 0.1V — — 50 µA VB = VS = 600V Min. Typ. Max. Units Test Conditions 19.4 20 20.6 94 100 106 V µA VCC ≤ VCCUV- Floating Supply Characteristics Symbol Definition Micropower startup VBS supply current Quiescent VBS supply current Minimum required VBS voltage for proper functionality from RT to HO Offset supply leakage current IQBSUV IQBS VBSMIN ILK µA VCC ≤ VCCUV- Oscillator I/O Characteristics Symbol fOSC d ICT ICTUV VCT+ VCTVCTSD Definition Oscillator frequency RT pin duty cycle CT pin current UV-mode CT pin pull down current Upper CT ramp voltage threshold Lower CT ramp voltage threshold CT voltage shutdown threshold VRT+ High-level RT output voltage, VCC VRT VRT- Low-level RT output voltage VRTUV UV-mode RT output voltage VRTSD SD-Mode RT output voltage, VCC VRT 5 www.irf.com © 2014 International Rectifier kHz % µA mA RT = 36.9kΩ RT = 7.43kΩ 48 — 0.3 — — 1.8 — 50 0.001 0.7 8 4 2.1 10 52 1.0 1.2 — — 2.4 50 — 100 300 IRT = 1mA — 10 50 IRT = 100 µA — 100 300 0 100 — 10 50 — 10 300 fO < 100kHz VCC = 7V V IRT = 100 µA mV IRT = 1mA VCC ≤ VCCUVIRT = 100 µA, VCT= 0V IRT = 1mA, VCT= 0V January 17, 2014 IR25603(S)PBF Electrical Characteristics (cont.) Gate Driver Output Characteristics Symbol Min. Typ. Max. High level output voltage, VBIAS -VO Low-level output voltage, VO — — 0 0 100 100 VOL_UV UV-mode output voltage, VO — 0 100 tr tf Output rise time Output fall time Shutdown propagation delay Output dead time (HO or LO) Output source current Output sink current — — — 0.75 — — 80 45 660 1.20 180 260 150 100 — 1.65 — — VOH VOL tsd td IO+ IO- Definition Units Test Conditions mV IO = 0A IO = 0A IO = 0A VCC ≤ VCCUV- ns µs mA Functional Block Diagram 6 www.irf.com © 2014 International Rectifier January 17, 2014 IR25603(S)PBF Lead Definitions Symbol Description VCC RT CT COM LO Logic and internal gate drive supply voltage Oscillator timing resistor input VS HO Oscillator timing capacitor input IC power and signal ground Low side gate driver output High voltage floating supply return High side gate driver output VB High side gate driver floating supply Lead Assignments VB 8 RT HO 7 3 CT VS 6 4 COM LO 5 1 VCC 2 7 www.irf.com © 2014 International Rectifier January 17, 2014 IR25603(S)PBF Application Information and Additional Details Figure 1. Input/Output Timing Diagram Figure 2. Switching Time Waveform Definitions Figure 3. Deadtime Waveform Definitions 8 www.irf.com © 2014 International Rectifier January 17, 2014 IR25603(S)PBF Package Details 9 www.irf.com © 2014 International Rectifier January 17, 2014 IR25603(S)PBF Tape and Reel Details, SO8N LOADED TAPE FEED DIRECTION A B H D F C NOTE : CONTROLLING DIMENSION IN MM E G CARRIER TAPE DIMENSION FOR 8SOICN Metric Imperial Code Min Max Min Max A 7.90 8.10 0.311 0.318 B 3.90 4.10 0.153 0.161 C 11.70 12.30 0.46 0.484 D 5.45 5.55 0.214 0.218 E 6.30 6.50 0.248 0.255 F 5.10 5.30 0.200 0.208 G 1.50 n/a 0.059 n/a H 1.50 1.60 0.059 0.062 F D C B A E G H REEL DIMENSIONS FOR 8SOICN Metric Code Min Max A 329.60 330.25 B 20.95 21.45 C 12.80 13.20 D 1.95 2.45 E 98.00 102.00 F n/a 18.40 G 14.50 17.10 H 12.40 14.40 10 www.irf.com Imperial Min Max 12.976 13.001 0.824 0.844 0.503 0.519 0.767 0.096 3.858 4.015 n/a 0.724 0.570 0.673 0.488 0.566 © 2014 International Rectifier January 17, 2014 IR25603(S)PBF Part Marking Information IRxxxxx Part number YWW ? Date code Pin 1 Identifier ? XXXX ? MARKING CODE P Lead Free Released Non-Lead Free Released 11 www.irf.com IR logo © 2014 International Rectifier Lot Code (Prod mode – 4 digit SPN code) Assembly site code Per SCOP 200-002 January 17, 2014 IR25603(S)PBF Qualification Information † †† Industrial (per JEDEC JESD 47) Comments: This family of ICs has passed JEDEC’s Industrial qualification. IR’s Consumer qualification level is granted by extension of the higher Industrial level. ††† MSL2 SOIC8N (per IPC/JEDEC J-STD 020) Qualification Level Moisture Sensitivity Level PDIP8 RoHS Compliant Not applicable (non-surface mount package style) Yes † †† Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. ††† Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change without notice. This document supersedes and replaces all information previously supplied. For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 12 www.irf.com © 2014 International Rectifier January 17, 2014