IRAMS10UP60B-2

PD-95830 RevI Integrated Power Hybrid IC for Appliance Motor Drive Applications. Description IRAMS10UP60B Series 10A, 600V with Internal Shunt Resistor International Rectifier's IRAMS10UP60B is an Integrated Power Module developed and optimized for electronic motor control in appliance applications such as washing machines and refrigerators. Plug N Drive technology offers an extremely compact, high performance AC motor-driver in a single isolated package for a very simple design. An internal shunt is also included and offers easy current feedback and overcurrent monitor for precise and safe operation. A built-in temperature monitor and over-current protection, along with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and fail-safe operation. The integration of the bootstrap diodes for the high-side driver section, and the single polarity power supply required to drive the internal circuitry, simplify the utilization of the module and deliver further cost reduction advantages. Features • • • • • • • • • • Internal Shunt Resistor Integrated Gate Drivers and Bootstrap Diodes Temperature Monitor Fully Isolated Package Low VCE(on) Non Punch Through IGBT Technology Undervoltage lockout for all channels Matched propagation delay for all channels Schmitt-triggered input logic Cross-conduction prevention logic Lower di/dt gate driver for better noise immunity • Motor Power range 0.4~0.75kW / 85~253 Vac • Isolation 2000VRMS /1min and CTI > 600V • Recognized by UL (E252584), RoHS Compliant Absolute Maximum Ratings Parameter Description Value VCES / VRRM IGBT/Diode Blocking Voltage 600 V+ Positive Bus Input Voltage 450 Units V IO @ TC=25°C RMS Phase Current (Note 1) 10 IO @ TC=100°C RMS Phase Current (Note 1) 5 IO Pulsed RMS Phase Current (Note 2) 15 FPWM PWM Carrier Frequency 20 kHz PD Power dissipation per IGBT @ TC =25°C 27 W 2000 VRMS VISO Isolation Voltage (1min) TJ (IGBT & Diodes) Operating Junction temperature Range -40 to +150 TJ (Driver IC) Operating Junction temperature Range -40 to +150 T Mounting torque Range (M3 screw) 0.5 to 1.0 A °C Nm Note 1: Sinusoidal Modulation at V+=400V, TJ=150°C, FPWM=20kHz, Modulation Depth=0.8, PF=0.6, See Figure 3. Note 2: tP