KITXMC45RELAXLITEV1TOBO1

E valu atio n B oar d For XMC4000 Family XMC 450 0 Rela x Ki t & XMC 450 0 Rela x Lit e Kit Kit Version 1 Boa rd Us er‘s Ma nu al Revision 1.2, 2014-01-13 Mic rocon t rolle r Edition 2014-01-13 Published by Infineon Technologies AG 81726 Munich, Germany © 2014 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Revision History Page or Item Subjects (major changes since previous revision) Revision 1.0, 2012-11-07 Initial release Revison 1.1, 2012-11-09 Revison 1.2, 2014-01-13 Correction of DAVE™3 trademark Notes have been added to Figure 5 (Pins of Pin Header X1 / X2 are partly used also for onboard circuits) Trademarks of Infineon Technologies AG AURIX™, C166™, CanPAK™, CIPOS™, CIPURSE™, EconoPACK™, CoolMOS™, CoolSET™, CORECONTROL™, CROSSAVE™, DAVE™, EasyPIM™, EconoBRIDGE™, EconoDUAL™, EconoPIM™, EiceDRIVER™, eupec™, FCOS™, HITFET™, HybridPACK™, I²RF™, ISOFACE™, IsoPACK™, MIPAQ™, ModSTACK™, my-d™, NovalithIC™, OptiMOS™, ORIGA™, PRIMARION™, PrimePACK™, PrimeSTACK™, PRO-SIL™, PROFET™, RASIC™, ReverSave™, SatRIC™, SIEGET™, SINDRION™, SIPMOS™, SmartLEWIS™, SOLID FLASH™, TEMPFET™, thinQ!™, TRENCHSTOP™, TriCore™. Other Trademarks Advance Design System™ (ADS) of Agilent Technologies, AMBA™, ARM™, MULTI-ICE™, KEIL™, PRIMECELL™, REALVIEW™, THUMB™, µVision™ of ARM Limited, UK. AUTOSAR™ is licensed by AUTOSAR development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum. COLOSSUS™, FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™ of Epcos AG. FLEXGO™ of Microsoft Corporation. FlexRay™ is licensed by FlexRay Consortium. HYPERTERMINAL™ of Hilgraeve Incorporated. IEC™ of Commission Electrotechnique Internationale. IrDA™ of Infrared Data Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLAB™ of MathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc. MICROTEC™, NUCLEUS™ of Mentor Graphics Corporation. Mifare™ of NXP. MIPI™ of MIPI Alliance, Inc. MIPS™ of MIPS Technologies, Inc., USA. muRata™ of MURATA MANUFACTURING CO., MICROWAVE OFFICE™ (MWO) of Applied Wave Research Inc., OmniVision™ of OmniVision Technologies, Inc. Openwave™ Openwave Systems Inc. RED HAT™ Red Hat, Inc. RFMD™ RF Micro Devices, Inc. SIRIUS™ of Sirius Satellite Radio Inc. SOLARIS™ of Sun Microsystems, Inc. SPANSION™ of Spansion LLC Ltd. Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo Yuden Co. TEAKLITE™ of CEVA, Inc. TEKTRONIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA. UNIX™ of X/Open Company Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VLYNQ™ of Texas Instruments Incorporated. VXWORKS™, WIND RIVER™ of WIND RIVER SYSTEMS, INC. ZETEX™ of Diodes Zetex Limited. Last Trademarks Update 2011-02-24 Template: IFX_Template_2011-02-24.dot XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Table of Contents Table of Contents Introduction ............................................................................................................................................................ 7 1 1.1 1.2 Overview ............................................................................................................................................. 7 Key Features ........................................................................................................................................ 7 Block Diagram ...................................................................................................................................... 8 2 2.1 2.2 Hardware Description ........................................................................................................................ 9 Power Supply ..................................................................................................................................... 11 Pin Header Connector ........................................................................................................................ 12 3 3.1 3.2 3.3 Production Data................................................................................................................................ 14 Schematics ......................................................................................................................................... 14 Components Placement and Geometry ............................................................................................. 17 List of Material .................................................................................................................................... 18 Board Users Manual 4 Revision 1.2, 2014-01-13 XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 List of Figures List of Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Block Diagram of the XMC4500 Relax/Relax Lite Kit-V1..................................................................... 8 XMC4500 Relax Lite Kit-V1 ................................................................................................................. 9 XMC4500 Relax Kit-V1 ...................................................................................................................... 10 Power Supply Concept ....................................................................................................................... 11 Signal mapping of the pin headers..................................................................................................... 12 Mapping of communication peripherals to GPIOs and it’s corresponding functions ......................... 13 CPU, Pin Headers, Buttons, LEDs, Reset ......................................................................................... 15 On-board Debugger, Power Supply, Ethernet, Quad-SPI Memory, SD Card Slot, RTC Crystal ...... 16 Components Placement and Geometry ............................................................................................. 17 Board Users Manual 5 Revision 1.2, 2014-01-13 XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 List of Tables List of Tables Table 1 Table 2 Features ............................................................................................................................................... 7 List of Material .................................................................................................................................... 18 Board Users Manual 6 Revision 1.2, 2014-01-13 XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Overview Introduction This document describes the features and hardware details of the XMC4500 Relax Kit-V1 and the XMC4500 Relax Lite Kit-V1, both equipped with the ARM® Cortex™-M4 based XMC4500 Microcontroller from Infineon Technologies AG. 1 Overview The XMC4500 Relax Kit-V1 and the XMC4500 Relax Lite Kit-V1 are designed to evaluate the capabilities of the XMC4500 Microcontroller and the powerful, free of charge tool chain DAVE™. The XMC4500 Relax Kit extends the feature set with an Ethernet-enabled communication option, e.g. to run an embedded web server. You can store your own HTML web pages on a microSD Card or control the XMC4500 via the web browser on your PC. The XMC4500 Relax Lite Kit-V1 does not support the web server application, because the components for the Ethernet are not assembled. Both boards are marked with “XMC4500 Relax/Relax Lite Kit-V1”. These boards are neither cost nor size optimized and do not serve as a reference design. 1.1 Key Features Table 1 summarizes the features of both the XMC4500 Relax Kit-V1 and the XMC4500 Relax Lite Kit-V1. Table 1 Features Feature XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 XMC4500 Microcontroller (ARM® Cortex™-M4F based) Detachable on-board Debugger Power over USB 2 x User Button and 2 x User LED Reset Button Power Regulator from 5 V to 3.3V 4 x SPI-Master, 3x I2C, 3 x I2S, 3 x UART, 2 x CAN, 17 x ADC (12 bit), 2 x DAC, 31x PMW mapped on 2 Pin Headers 2 x 20 USB-OTG (Micro USB Plug) Ethernet PHY and RJ45 jack Real Time Clock Crystal 32 Mbit Quad-SPI Flash Memory microSD Card Slot Board Users Manual 7 Revision 1.2, 2014-01-13 XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Overview 1.2 Block Diagram The block diagram in Figure 1 shows the main components of the XMC4500 Relax/Relax Lite Kit-V1 and their interconnections. There are following main building blocks:  XMC4500 Microcontroller in a LQFP100 package  On-board USB debugger realized with a 2  Ethernet Phy with RJ45 Plug  Two 40 pin header X1 and X2  On-board power generation for power supply of the XMC45000 Microcontroller and the debug IC  2 User Buttons and 2 User LEDs  USB Plug  microSD Card Slot XMC4500 Relax/Relax Lite nd XMC4500 for serial wire debug Pin Header X1 2x20, 0.1" * RJ45 ETH PHY 25 MHz Crystal 32.768 kHz +5V Power LED * Micro USB RMII ETH USB USB qSPI Flash micro SD SD/MMC ADC, DAC, CCU42, CCU80, POSIF0, U1C0, U1C1, CAN0, ERU0, LEDTS XMC4500 Microcontroller OCS EVR BSL Debug, U1C1 +3.3V GPIO, DSD, CCU4[0..2], CCU8[0..1], POSIF0, U0C0, ERU0, U1C0, U2C0, CAN[0..2], ERU[0..1] ERU1 XMC4500 Debug IC SWD SWV UART PORST # U0C0 SDMMC RTC Micro USB RESET Debug LED P1.15 BUTTON2 P1.0 LED2 P1.14 BUTTON1 12 MHz Crystal Voltage Regulator P1.1 LED1 Cortex Debug (10pin) Pin Header X2 2x20, 0.1" BlockDiag.emf Not assembled in Relax Lite version Figure 1 Not assembled in both versions * Simplified view on power supply Block Diagram of the XMC4500 Relax/Relax Lite Kit-V1 Board Users Manual 8 Revision 1.2, 2014-01-13 XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Hardware Description 2 Hardware Description The following sections give a detailed description of the board hardware and how it can be used. Figure 2 shows the XMC4500 Relax Lite Kit-V1, Figure 3 shows the XMC4500 Relax Kit-V1. Evaluation Board Detachable Debugger Pin Header X1 Reset Button Pin Header X2 Micro USB 12 MHz XTAL XMC4500 Microcontroller Voltage Regulator Power LED Cortex Debug (10Pin) User Buttons & LEDs Debug LED XMC4500 Debug IC Micro USB PCB_Block_Lite.emf Figure 2 XMC4500 Relax Lite Kit-V1 Board Users Manual 9 Revision 1.2, 2014-01-13 XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Hardware Description Evaluation Board Ethernet RJ45 & PHY Detachable Debugger RTC XTAL Pin Header X1 Pin Header X2 Micro USB qSPI Flash microSD Voltage Regulator Reset Button 12 MHz XTAL XMC4500 Microcontroller Power LED Cortex Debug (10Pin) User Buttons & LEDs Debug LED XMC4500 Debug IC Micro USB PCB_Block.emf Figure 3 XMC4500 Relax Kit-V1 Board Users Manual 10 Revision 1.2, 2014-01-13 XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Hardware Description 2.1 Power Supply The XMC4500 Relax/Relax Lite Kit-V1 must be supplied by an external 5 Volt DC power supply connected to any of the Micro UBS plugs (X3, X100). Out of the box with the pre-programmed web server application and the on-board debugger in operation the XMC4500 Relax Kit-V1 typically draws about 250 mA. The XMC4500 Relax Lite Kit-V1 without the web server capabilities draws about 200 mA. This current can be delivered via the USB plug of a PC, which is specified to deliver up to 500 mA. The Power LED indicates the presence of the generated 3.3V supply voltage. On-board reverse current protection diodes will ensure safe operation in case power is provided through both USB plugs at the same time. These protection diodes allows to use the on-board debugger connected with a PC/Notebook via X100 and a second host PC/Laptop connected with the XMC4500 Relax Kit via X3. If the board is powered via a USB plug, it’s not recommended to apply an additional 5 Volt power supply to one of the 5 Volt power pins (VDD5) on the pin headers X1 or X2, because there is no protection against reverse current into the external power supply. These power pins can be used to power an external circuit. But care must be taken not to draw more current than USB can deliver. A PCs as USB host typically can deliver up to 500 mA current. If higher currents are required and in order to avoid damages on the USB host the use of an external USB power supply unit which is able to deliver higher currents than 500 mA is strongly recommended. After power-up the Debug LED starts blinking. In case there is a connection to a PC via the Debug USB plug X100 and the USB Debug Device drivers are installed on this PC, the Debug LED will turn from blinking to constant illumination. XMC4500 Relax/Relax Lite Kit-V1 Power LED IC1 IC101 X3 Micro USB* +5V Infineon Infineon X100 3.3V Lin. Voltage Regulator IFX1763 Micro USB** IC100 XMC4500 Microcontroller Infineon IC200 XMC4500 Debug IC Infineon Eth Phy Infineon Pin Header X1 and X2 2x20, 0.1" * Micro USB on Evaluation Board ** Micro USB on Detachable Debugger Figure 4 Power.emf Power Supply Concept Board Users Manual 11 Revision 1.2, 2014-01-13 XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Hardware Description 2.2 Pin Header Connector The pin headers X1 and X2 can be used to extend the evaluation board or to perform measurements on the XMC4500. Figure 5 shows the available GPIOs/signals at the pin headers. The pinning table is also printed onto the bottom side of the PCB. Pin Header X2 2 1 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 GND GND P5.7 P5.1 P1.15** P1.13 P1.11 P1.5*** P1.3*** P1.1* P1.9 P0.8 P3.4 P0.12 P0.6 P0.2 P0.4 GND VDD3.3 VDD5 GND GND P2.6 P5.2 P5.0 P1.14** P1.12 P1.10*** P1.4*** P1.2*** P1.0* P1.8*** P0.7 P3.3 P0.11 P0.5 P0.3 GND VDD3.3 VDD5 Pin Header X1 2 1 (Top View) 3 5 7 4 6 8 9 10 11 13 15 17 12 14 16 18 19 20 21 23 25 27 22 24 26 28 29 30 31 33 35 37 39 32 34 36 38 40 GND GND RESET# P2.10 P14.8 P14.9 P14.0 P14.2 P14.4 P14.6 P14.12 P14.14 P15.2 HIB_IO_0 P3.0 P3.2 P0.1 P0.0 VDD3.3 VDD5 GND GND GND P2.1 P2.14 P2.15 VAREF P14.1 P14.3 P14.5 P14.7 P14.13 P14.15 P15.3 HIB_IO_1 P3.1 P0.9 P0.10 VDD3.3 VDD5 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 * P1.1 is connected to LED1, P1.0 is connected to LED2 (2 mA load, ~2 V clip of input signal) ** P1.14 is connected to BUTTON1, P1.15 is connected to BUTTON 2 (both with a 100 nF capacitor in parallel) *** These pins are connected to the on-board SPI Fash Memory (not valid for Relax Lite): X2.23 = Port 1.8 = SPI Flash CS# X2.15 = Port 1.10 = SPI Flash CLK X2.16 = Port 1.5 = SPI Flash DI (IO0) X2.17 = Port 1.4 = SPI Flash DO (IO1) X2.18 = Port 1.3 = SPI Flash WP# (IO2) X2.19 = Port 1.2 = SPI Flash HOLD# (IO3) Figure 5 Signal mapping of the pin headers The XMC4500 provides a flexible mapping of functions to different pins. Figure 6 shows an example how the communication peripheral functions UART, I2C, SPI, CAN and I2S can be mapped to XMC4500’s GPIOs. GPIOs with the same colour code belong to the same group of physical pins and cannot be choosen twice. For instance UART-3 has got a pin overlap with I2C-Master1 and therefore this combination cannot work in parallel. Please also avoid pheripheral combinations which are using the same USIC channel. For example I2C-Master2 and UART-3 utilizing USIC 0 Channel 0 (U0C0), therefore this combination does not work in parallel. Board Users Manual 12 Revision 1.2, 2014-01-13 XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Hardware Description UART UART-1 UART-2 UART-3 UART-4 TX P0.1 / U1C1.DOUT0 P1.5 / U0C0.DOUT0 P5.1 / U0C0.DOUT0 P0.5 / U1C0.DOUT0 RX P0.0 / U1C1.DX0D P1.4 / U0C0.DX0B P5.0 / U0C0.DX0D P0.4 / U1C0.DX0A I2C-Master1 I2C-Master2 I2C-Master3 I2C-Slave1 I2C-Slave2 P5.2 / U2C0.SCLKOUT P1.10 / U0C0.SCLKOUT P0.11 / U1C0.SCLKOUT P5.2 / U2C0.DX1A P0.11 / U1C0.DX1A P5.0 / U2C0.DOUT0 / .DX0B P1.5 / U0C0.DOUT0 /.DX0A P0.5 / U1C0.DOUT0 /.DX0B P5.0 /U2C0.DOUT0 / .DX0B P0.5 / U1C0.DOUT0 /.DX0B SPI-Master1 SPI-Master2 SPI-Master3 SPI-Master4 SPI-Slave1 SPI-Slave2 MOSI P0.1 / U1C1.DOUT0 P5.0 / U2C0.DOUT0 P1.5 / U0C0.DOUT0 P0.5 / U1C0.DOUT0 P0.0 / U1C1.DX0D P0.4 / U1C0.DX0A MISO P0.0 / U1C1.DX0D P5.1 / U2C0.DX0A P1.4 / U0C0.DX0B P0.4 / U1C0.DX0A P0.1 / U1C1.DOUT0 P0.5 / U1C0.DOUT0 P0.10 / U1C1.SCLKOUT P5.2 / U2C0.SCLKOUT P1.10 / U0C0.SCLKOUT P0.11 / U1C0.SCLKOUT P0.10 / U1C1.DX1A P0.11 / U1C0.DX1A CS (chip select) P0.9 / U1C1.SELO0* P2.6 / U2C0.SELO4 P1.11 / U0C0.SELO0** P0.6 / U1C0.SELO0 P0.9 / U1C1.DX2A P0.6 / U1C0.DX2A CAN CAN-1 CAN-2 TX P1.12 / CAN.N1_TXD P1.4 / CAN.N0_TXD RX P1.13 / CAN.N1_RXDC P1.5 / CAN.N0_RXDA I2C-Master1 I2C-Master2 I2C-Master3 I2C-Slave1 P5.2 / U2C0.SCLKOUT P1.10 / U0C0.SCLKOUT P0.11 / U1C0.SCLKOUT P0.11 / U1C0.DX1A SD (data) P5.0 / U2C0.DOUT0 / .DX0B P1.5 / U0C0.DOUT0 /.DX0A P0.5 / U1C0.DOUT0 /.DX0B P5.0 / U2C0.DOUT0 / .DX0B WS (wait) P2.6 / U2C0.SEL04 P1.11 / U0C0.SELO0 P0.6 / U1C0.SELO0 P0.6 / U2C0.DX2A I2C Master/Slave SCL (clock) SDA (data) SPI Master/Slave SCK (clock) I2S Master/Slave SCK (clock) * more chip select signals for U1C1 can be found at P3.3, P3.4, P3.5, P3.6 ** another chip select signal for U0C0 can be found at P1.8 Figure 6 Mapping of communication peripherals to GPIOs and it’s corresponding functions Board Users Manual 13 Revision 1.2, 2014-01-13 XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Production Data 3 Production Data 3.1 Schematics This chapter contains the schematics for the XMC4500 Relax/Relax Lite Kit-V1:  Figure 7: CPU, Pin Headers, Buttons, LEDs, Reset  Figure 8: On-board Debugger, Power Supply, Ethernet, Quad-SPI Memory, SD Card Slot, RTC Crystal Board Users Manual 14 Revision 1.2, 2014-01-13 E D C 1 2 3 4 5 X3 1 VDD5 33R 33R R10 R11 D1 ESD8V0L2B-03L BLM18PG600 GND P0.0 P0.1 P3.2 P3.0 HIB_IO_0 P15.2 P14.14 P14.12 P14.6 P14.4 P14.2 P14.0 P14.9 P14.8 P2.10 RESET# VDD3.3 L1 2x20 GND GND GND 2 VDD3.3 USB Connector ZX62-AB-5PA 2 A C D2 BAT60A P0.3 P0.5 P0.11 P3.3 P0.7 P1.8 P1.0 P1.2 P1.4 P1.10 P1.12 P1.14 P5.0 P5.2 P2.6 GND GND GND 2*20 GND 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 GND VDD3.3 VDD3.3 VDD5 P0.10 P0.9 P3.1 HIB_IO_1 P15.3 P14.15 P14.13 P14.7 P14.5 P14.3 P14.1 VAREF P2.15 P2.14 P2.1 VDD3.3 B 3 D2 VDD3.3 C1 10uF/10V X2 C3 100nF 39 37 35 33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1 C4 100nF VDD5 VDD5 C5 100nF VDD5 C2 10uF/10V 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 P0.4 P0.2 P0.6 P0.12 P3.4 P0.8 P1.9 P1.1 P1.3 P1.5 P1.11 P1.13 P1.15 P5.1 P5.7 3 C7 100nF X1 C6 100nF 39 37 35 33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1 C8 100nF 4 20 21 22 23 36 37 24 25 26 27 28 29 30 31 P14.15 P14.14 P14.13 P14.12 P14.9 P14.8 P14.7 P14.6 P14.5 P14.4 P14.3 P14.2 P14.1 P14.0 VDDC GND 86 64 42 12 87 60 43 11 10 USB_DM 8 USB_DP 9 17 HIB_IO_113 HIB_IO_014 68 69 70 71 72 73 80 81 82 83 74 75 76 77 78 79 94 95 3 4 88 89 96 97 98 99 100 1 2 P1.15 P1.14 P1.13 P1.12 P1.11 P1.10 P1.9 P1.8 MMC_DAT2 MMC_DAT1 P1.5 P1.4 P1.3 P1.2 P1.1 P1.0 P0.12 P0.11 P0.10 P0.9 P0.8 P0.7 P0.6 P0.5 P0.4 P0.3 P0.2 P0.1 P0.0 VDDC3 VDDC2 VDDC1 VDDC VDDP3 VDDP2 VDDP1 VDDP Analog Digital 4 IC1 VSSO VSS EPAD PORST# TCK TMS XTAL1 XTAL2 RTC_XTAL_1 RTC_XTAL_2 VAREF VAGND VDDA VSSA P15.9 P15.8 P15.3 P15.2 P4.0 P4.1 P5.7 P5.2 P5.1 P5.0 P2.15 P2.14 P2.10 P2.9 P2.8 P2.7 P2.6 P2.5 P2.4 P2.3 P2.2 P2.1 P2.0 P3.6 P3.5 P3.4 P3.3 P3.2 P3.1 P3.0 XMC4500_LQFP100 XMC4500-F100x1024 Supply Hibernate/RTC USB_DUSB USB_D+ VBUS HIB_IO_1 HIB_IO_0 VBAT P14.15 P14.14 P14.13 P14.12 P14.9 P14.8 P14.7 P14.6 P14.5 P14.4 P14.3 P14.2 P14.1 P14.0 P1.15 P1.14 P1.13 P1.12 P1.11 P1.10 P1.9 P1.8 P1.7 P1.6 P1.5 P1.4 P1.3 P1.2 P1.1 P1.0 P0.12 P0.11 P0.10 P0.9 P0.8 P0.7 P0.6 P0.5 P0.4 P0.3 P0.2 P0.1 P0.0 P0.[0..15],P1.[0..15],P2.[0..15],P3.[0..15],P4.[0..7],P5.[0..11],P6.[0..6],P14.[0..15],P15.[2..15],HIB_IO_0,HIB_IO_1 C9 100nF A C10 100nF XMC4500 Relax and XMC4500 Relax Lite 1 D1 3 C11 10uF/10V MMC_DAT0 MMC_DAT3 85 84 63 59 EXP 65 67 66 61 62 15 16 33 32 35 34 RTC1 Q1 510R 12MHZ/S/3.2X2.5 VDDA RTC2 L2 VAREF P1.1 Buttons & LEDs ADJ_1 7 P1.0 Cortex Debug RESET# Reset 2 4 6 8 10 TMS TCK P2.1 P0.7 GND S S1 P P1 1 S S1 GND 2 GND V1 / 25.10.2012 RESET# S S1 BUTTON 2 SW1 TMPS2-SMD TDO/SWO TDI SW3 TMPS2-SMD GND 100nF C24 P P1 BUTTON 1 SW2 TMPS2-SMD D3 FTSH-105-01-F-D-K BAT54-02V 1 3 5 7 9 X5 GND C20 10nF P P1 P1.15 GND 100nF C25 ADJ_3 5 6 Sheet: 1/2 8 25.10.2012 13:02:04 XMC4500_Relax-V1 7 GND GND DBGPRES# GND P1.14 ADJ_2 8 XMC4500 Relax/Relax Lite Kit GND C16 100nF C17 100nF AGND The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. GND 6 10k Legal Disclaimer GND RESET# TCK TMS R12 ETH_CRS ETH_CLK P15.3 P15.2 P5.7 P5.2 P5.1 P5.0 55 56 57 58 38 39 18 19 P2.15 P2.14 P2.10 ETH_TXD1 ETH_TXD0 ETH_MDC P2.6 ETH_TXEN ETH_RXER ETH_RXD1 ETH_RXD0 P2.1 ETH_MDIO MMC_CLK MMC_CMD P3.4 P3.3 P3.2 P3.1 P3.0 40 41 44 45 46 53 54 47 48 49 50 51 52 90 91 92 93 5 6 7 5 VDD3.3 BLM18PG600 L3 C12 15pF LED1 LED2 2 AGND BLM18PG600 C13 15pF 2mA LED 2mA LED R4 R3 VDD3.3 R1 15 VDD3.3 LED2 LED-RT/D/0603 680R 680R LED1 LED-RT/D/0603 10k/0402 VDD3.3 R6 VDD3.3 Board Users Manual R5 Figure 7 10k 1 E D C B A XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Production Data CPU, Pin Headers, Buttons, LEDs, Reset Revision 1.2, 2014-01-13 E D C Power X101 4 3 2 1 no ass. GND GND Q100 R103 12MHZ/S/3.2X2.5 TDO TDI 1 GND 3 IN GND OUT1 OUT2 2 4 DBGPRES# WTCK WTMS 510R/0603 P0.7 TCK CS P2.1 IC101 IFX1117MEV33 GND 10k B C100 15pF VDD5 C109 GND 63 59 EXP 65 67 66 61 62 15 16 33 32 35 34 38 39 18 19 85 84 55 56 57 58 40 41 44 45 46 53 54 47 48 49 50 51 52 90 91 92 93 5 6 7 2 GND GND VDDC3 VDDC2 VDDC1 VDDC VDDP3 VDDP2 VDDP1 VDDP VBUS 3 Debug Connector Supply USB_D- HIB_IO_1 HIB_IO_0 VBAT P14.15 P14.14 P14.13 P14.12 P14.9 P14.8 P14.7 P14.6 P14.5 P14.4 P14.3 P14.2 P14.1 P14.0 P1.15 P1.14 P1.13 P1.12 P1.11 P1.10 P1.9 P1.8 P1.7 P1.6 P1.5 P1.4 P1.3 P1.2 P1.1 P1.0 P0.12 P0.11 P0.10 P0.9 P0.8 P0.7 P0.6 P0.5 P0.4 P0.3 P0.2 P0.1 P0.0 USB USB_D+ Hibernate/RTC Analog Digital XMC4500_LQFP100 XMC4500-F100x1024 VSSO VSS EPAD PORST# TCK TMS XTAL1 XTAL2 RTC_XTAL_1 RTC_XTAL_2 VAREF VAGND VDDA VSSA P15.9 P15.8 P15.3 P15.2 P4.0 P4.1 P5.7 P5.2 P5.1 P5.0 P2.15 P2.14 P2.10 P2.9 P2.8 P2.7 P2.6 P2.5 P2.4 P2.3 P2.2 P2.1 P2.0 P3.6 P3.5 P3.4 P3.3 P3.2 P3.1 P3.0 TMS TCK P2.1 P0.1 86 64 42 12 87 60 43 11 P0.0 P0.1 RESET# GND 33R/0402 33R/0402 JP500 1 3 5 7 JP501 1 3 5 7 TCK TMS SWV IC100_TXD IC100_RXD 4 D101 ESD8V0L2B-03L TCK CS TMS P2.1 DEBUG_LED R104 100R 8 R101 9 R102 10 13 14 17 20 21 22 23 36 37 24 25 26 27 28 29 30 31 68 69 70 71 72 73 80 81 82 83 74 75 76 77 78 79 94 95 3 4 88 89 96 97 98 99 100 1 2 C103 100nF 3 C102 100nF VDD3.3 C105 10uF/10V A C101 15pF 4 TH-Pads 2.54mm pitch R105 VDD3.3 10uF/10V 2 4 6 8 2 4 6 8 GND 4 GND LED100 680R LED-GN/D/0603 Debug 2mA LED P0.0 RESET# GND GND L100 BLM18PG600 1 2 3 4 5 X100C GND GND L200 3 4 S1 S2 S3 S4 3M_2908-05WB DAT2 DAT3/CS_N CMD/MOSI VDD CLK/SCK GND DAT0/MISO DAT1 X300 GND P1.3 22 EXP 9 18 23 3 4 5 6 24 S1 S2 S3 S4 7 GND 7 8 6 5 3 2 4 1 RJ45 S1 S2 RA RC LA LC RESET# RTC1 RTC2 RTC Crystal Relax Kit only P2.10 Würth 7499010211A NC CG RD- CTR RD+ TD- CTT TD+ X200 L201 BLM18PG600 GND 1 D201 2 BAT54-02V 8 GND V1 / 25.10.2012 GND Q2 32.768KHz S1 S2 12 11 9 10 5 6 Sheet: 2/2 8 25.10.2012 13:02:04 XMC4500_Relax-V1 GND 1 2 3 4 5 6 7 8 S25FL032P0XMFI01 (IO0) (IO1) WP# (IO2) CS# CLK DI DO GND HOLD# (IO3) GND VCC IC400 KSZ8031RNL GND P_GND REXT INTRP LED0 RXM RXP TXM TXP RST# Q200 25MHz/50ppm XI XO MDC MDIO REF_CLK TXEN TXD0 TXD1 CRS_DV RXD0 RXD1 RXER VDDIO VDD_1.2 VDDA_3.3 IC200 R206 no ass./0R P3.1 7 XMC4500 Relax/Relax Lite Kit ZX62-AB-5PA The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. MMC_DAT0 MMC_DAT1 MMC_CLK GND 100nF C400 1 6 5 2 7 8 8 7 11 10 16 19 20 21 15 13 12 17 14 1 2 GNDGND GNDGND GND MMC_DAT2 MMC_DAT3 MMC_CMD Micro SD-Card Relax Kit only P1.8 P1.10 P1.5 P1.4 P1.2 qSPI Flash Relax Kit only ETH_MDC ETH_MDIO ETH_CLK ETH_TXEN ETH_TXD0 ETH_TXD1 ETH_CRS ETH_RXD0 ETH_RXD1 ETH_RXER Ethernet Relax Kit only 6 1k Legal Disclaimer 5 R204 1 2 2 LED101 680R/0603 LED-GN/D/0603 Power BAT60A C19 100nF BAT54-02V D200 6k49 IC100 C104 10uF/10V C A VDD5 D102 C106 100nF On-board Debugger ADJ 1 C108 100nF VDD3.3 1 R7 10uF/10V VDD3.3 R100 2 VDD3.3 10k R401 R300 10k D2 C205 100nF C201 100nF 22uF/10V C202 10k R301 10k 3 D1 22uF/10V C204 22uF/10V C200 R402 BLM18PG600 100nF C203 R303 10k VDD3.3 C110 10uF/10V VDD3.3 R106 R400 1k R203 C206 22pF R304 10k VDD3.3 C207 22pF VDD3.3 100nF C208 VDD3.3 100nF C209 10k C210 VDD3.3 120R VDD3.3 R200 VDD3.3 10k 16 R302 10k C14 15pF Board Users Manual C15 15pF 120R R201 Figure 8 R207 1 E D C B A XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Production Data On-board Debugger, Power Supply, Ethernet, Quad-SPI Memory, SD Card Slot, RTC Crystal Revision 1.2, 2014-01-13 XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Production Data 3.2 Components Placement and Geometry 1 Power R106 C109 X100 Debug R100 IC100 Q100 X2 R103 Q100 R105 C105 C100 R104 C108 C101 X2 LED100 C102 C106 10 0 IC C19 C103 47.4 mm X5 D3 1 2 D101 D102 LED1 LED2 P1.0 9.2 mm C24 SW2 BUTTON1 29 X100 R101 LED2 LED1 R3 X5 P1.136.4 mm 27.2 mm SW1 BUTTON2 R5 19 R102 L100 C104 9 ADJ_3 IC101 50x 0.4mm 1JP501 drills, NPTH 3.4 mm 1 R6 C2 C13 XMC4500 Relax/Relax Lite Kit-V1 www.infineon.com/xmc-dev C25 X300 card IN card OUT Q1 9 ADJ_1 SW3 RESET C 3 C C 10 C C X300 C11 40 1JP500 5 C 12 R 12 C C Q1 6 IC400 R401 R402 R304 R303 R302 R300 R301 R1 R4 C15 C14 L2 L3 1 R206 C204 IC1 IC400 R400 C400 C20 7 C205 Q2 C16 R7 D201 C210 IC200 R200 Q200 30 Q2 IC1 R10 R11 IC200 R203 X200 C209 C208 D2 L1 D1 R204 20 D200 5 6 8 12 RIGHT C201 7 11 L201 X3 10 8 C 4 C R207 R201 50.8 mm C206 C203 C207 X3 C200 C202 C17 4 FRONT 3 L200 IC101 C110 2 1 X1 9 10 LEFT X200 LED101 X1 1 2 X101 4 3 2 1 1 ADJ_2 40 75.5 mm 98.52 mm Figure 9 Components Placement and Geometry Board Users Manual 17 Revision 1.2, 2014-01-13 XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Production Data 3.3 List of Material The list of material is valid for the XMC4500 Relax/Relax Lite Kit-V1. Table 2 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 List of Material Qty Value Reference Designator Device 2 2 1 1 1 1 2x4 1k 2*20 2x20 3M_2908-05WB 6k49 Pin Header 0.1” TH Resistor Pin Header 0.1” TH Pin Header 0.1” TH microSD Card Holder Resistor 12 1 1 8 2 6 2 3 1 1 2 2 1 10k 10k/0402 10nF 10uF/10V 12MHz/S/3.2X2.5 15pF 22pF 22uF/10V 25MHz/50ppm 32.768KHz 33R 33R/0402 100R Resistor Resistor Capacitor Capacitor Crystal 12 MHz Capacitor Capacitor Capacitor Crystal 12 MHz Crystal 32 kHz Resistor Resistor Resistor 23 2 1 1 3 1 3 2 6 2 3 1 100nF 120R 510R 510R/0603 680R 680R/0603 BAT54-02V BAT60A BLM18PG600 ESD8V0L2B-03L FIDUCIAL FTSH-105-01-F-D-K 1 1 2 2 1 IFX1117MEV33 KSZ8031RNL LED-GN/D/0603 LED-RT/D/0603 S25FL032P0XMFI01 Capacitor Resistor Resistor Resistor Resistor Resistor Schottky Diode, Infineon Schottky Diode, Infineon Inductor TVS Diode, Infineon FIDUCIAL Connector 2x5, Samtec Linear Voltage Regulator, Infineon Ethernet Phy, Micrel LED green LED red Quad-SPI Flash, Spansion Board Users Manual 18 JP500, JP501 R200, R203 X2 X1 X300 R204 R5, R6, R7, R105, R300, R301, R302, R303, R304, R400, R401, R402 R1 C20 C1, C2, C11, C104, C105, C109, C110, C210 Q1, Q100 C12, C13, C14, C15, C100, C101 C206, C207 C200, C202, C204 Q200 Q2 R10, R11 R101, R102 R104 C3, C4, C5, C6, C7, C8, C9, C10, C16, C17, C19, C24, C25, C102, C103, C106, C108, C201, C203, C205, C208, C209, C400 R201, R207 R12 R103 R3, R4, R100 R106 D3, D200, D201 D2, D102 L1, L2, L3, L100, L200, L201 D1, D101 ADJ_1, ADJ_2, ADJ_3 X5 IC101 IC200 LED100, LED101 LED1, LED2 IC400 Revision 1.2, 2014-01-13 XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Production Data Table 2 No. 37 38 39 40 41 42 List of Material Qty Value Reference Designator Device 3 TMPS2-SMD 1 7499010211A Push Button Ethernet RJ45 Plug, Würth Microcontroller Cortex 2 XMC4500-F100F1024 M4F, Infineon 2 ZX62-AB-5PA Micro USB Plug 1 no ass. Pin Header 1x4 1 no ass./0R Resistor Board Users Manual 19 SW1, SW2, SW3 X200 IC1, IC100 X3, X100 X101 R206 Revision 1.2, 2014-01-13 w w w . i n f i n e o n . c o m Published by Infineon Technologies AG