MB2198-504

Fujitsu Microelectronics Europe User Guide FMEMCU-UG-960006-11 MB96300 FAMILY HEADER BOARD MB2198-504 USER GUIDE MB2198-504 Revision History Revision History Date 2007-Mar-27 2007-Apr-11 Issue V1.0 HLi, First Release V1.1 HLi, remove MCU before using header board info added This document contains 10 pages. UG-960006-11 -2- © Fujitsu Microelectronics Europe GmbH MB2198-504 Warranty and Disclaimer Warranty and Disclaimer To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for the MB2198-504 Header Board and all its deliverables (e.g. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all accompanying written materials. In addition, to the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of the Product and any consequential damages in cases of unauthorised decompiling and/or reverse engineering and/or disassembling. Note, the MB2198-504 Header Board and all its deliverables are intended and must only be used in an evaluation laboratory environment. 1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in accordance with the accompanying written materials for a period of 90 days form the date of receipt by the customer. Concerning the hardware components of the Product, Fujitsu Microelectronics Europe GmbH warrants that the Product will be free from defects in material and workmanship under use and service as specified in the accompanying written materials for a duration of 1 year from the date of receipt by the customer. 2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability and the customer’s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s sole discretion, either return of the purchase price and the license fee, or replacement of the Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in original packing and without further defects resulting from the customer’s use or the transport. However, this warranty is excluded if the defect has resulted from an accident not attributable to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH. 3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH disclaims all other warranties, whether expressed or implied, in particular, but not limited to, warranties of merchantability and fitness for a particular purpose for which the Product is not designated. 4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s and its supplier’s liability are restricted to intention and gross negligence. NO LIABILITY FOR CONSEQUENTIAL DAMAGES To the maximum extent permitted by applicable law, in no event shall Fujitsu Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever (including but without limitation, consequential and/or indirect damages for personal injury, assets of substantial value, loss of profits, interruption of business operation, loss of information, or any other monetary or pecuniary loss) arising from the use of the Product. Should one of the above stipulations be or become invalid and/or unenforceable, the remaining stipulations shall stay in full effect © Fujitsu Microelectronics Europe GmbH -3- UG-960006-11 MB2198-504 Contents 0 Contents REVISION HISTORY ............................................................................................................ 2 WARRANTY AND DISCLAIMER ......................................................................................... 3 0 CONTENTS...................................................................................................................... 4 1 OVERVIEW...................................................................................................................... 5 Abstract ............................................................................................................................ 5 2 INSTALLATION ............................................................................................................... 6 3 DIMENSIONS................................................................................................................... 7 3.1 MB2198-504............................................................................................................ 7 3.2 YQ-SOCKET064SBN.............................................................................................. 8 3.3 YQ-PACK064SB ..................................................................................................... 8 4 INFORMATION IN THE WWW......................................................................................... 9 UG-960006-11 -4- © Fujitsu Microelectronics Europe GmbH MB2198-504 Chapter 1 Overview 1 Overview Abstract The MB2198-504 header board was built for the FTP-64P-M23 (LQFP) package to connect the MB2198-500 with the target-system. Related documents such as MB96300 Series Hardware Manual are available and should always be use in addition to this manual. © Fujitsu Microelectronics Europe GmbH -5- UG-960006-11 MB2198-504 Chapter 2 Installation 2 Installation - Remove carefully the board from the shipping carton. - Check first if there are any damages. - Check the contents of the box. 1x MB2198-504 1x NQPACK064SB 1x HQPACK064SB140 1x YQPACK064SB 1x User guide 960006-10 Press carefully and smooth the YQPACK064SB in the YQSOCKET064SBN - Remove MCU out of the socket (NQ-PACK) before using the header board The connection between YQ-SOCKET064SBN and YQPACK064SB is only once pluggable, since otherwise the pins can break off. h: YQPACK064SB f: MB2198-504 g: NQPACK064SB j: YQSOCKET064SBN o: Target Board i: YQ-Guide UG-960006-11 -6- © Fujitsu Microelectronics Europe GmbH MB2198-504 Chapter 3 Dimensions 3 Dimensions 3.1 MB2198-504 © Fujitsu Microelectronics Europe GmbH -7- UG-960006-11 MB2198-504 Chapter 3 Dimensions 3.2 3.3 YQ-SOCKET064SBN YQ-PACK064SB UG-960006-11 -8- © Fujitsu Microelectronics Europe GmbH MB2198-504 Chapter 4 Information in the WWW 4 Information in the WWW Information about FUJITSU MICROELECTRONICS Products can be found on the following Internet pages: Microcontrollers (8-, 16- and 32bit), Graphics Controllers Datasheets and Hardware Manuals, Support Tools (Hard- and Software) http://mcu.emea.fujitsu.com/mcu_portal.htm Linear Products: Power Management, A/D and D/A Converters http://www.fujitsu.com/emea/services/microelectronics Media Products: SAW filters, acoustic resonators and VCOs http://www.fujitsu.com/emea/services/microelectronics/saw For more information about FUJITUS MICROELECTRONICS http://www.fujitsu.com/emea/services/microelectronics © Fujitsu Microelectronics Europe GmbH -9- UG-960006-11 MB2198-504 Chapter 4 Information in the WWW Recycling Gültig für EU-Länder: Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische Gesetze nehmen wir dieses Gerät wieder zurück. Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse: Fujitsu Microelectronics Europe GmbH Warehouse/Disposal Monzastraße 4a 63225 Langen Valid for European Union Countries: According to the European WEEE-Directive and its implementation into national laws we take this device back. For disposal please send the device to the following address: Fujitsu Microelectronics Europe GmbH Warehouse/Disposal Monzastraße 4a 63225 Langen UG-960006-11 - 10 - © Fujitsu Microelectronics Europe GmbH