23-215A/T1D-CR1S1E/5A

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Reverse Package Chip LEDS 23-215A/T1D-CR1S1E/5A Features ․Package in 8mm tape on 13〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 23-215A SMD Taping is much smaller than `lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Part No. 23-215A/T1D-CR1S1E/5A Chip Material Emitted Color InGaN Pure White Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-235-001 Prepared date: 6-Mar-2007 Resin Color Yellow Diffused Rev. 2 Page: 1 of 12 Prepared by: Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 23-215A/T1D-CR1S2E/5A Package Outline Dimensions 0.2 0.6 0.8±0.05 3.2 2.0 1.2 1.0 0.6 2.0 2.0 1.0 0.6 Cathode Mark Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-235-001 Prepared date: 6-Mar-2007 Rev. 2 Page: 2 of 12 Prepared by: Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 23-215A/T1D-CR1S1E/5A Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 112 ----- 225 mcd IF=20mA Viewing Angle 2θ1/2 ----- 130 ----- deg IF=20mA Forward Voltage VF 2.75 ----- 3.65 V IF=20mA Reverse Current IR ----- ----- 50 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-235-001 Prepared date: 6-Mar-2007 Rev. 2 Page: 3 of 12 Prepared by: Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 23-215A/T1D-CR1S1E/5A Bin Range Of Luminous Intensity & Forward Voltage Symbol Bin Code Min. Max. R1 112 140 R2 140 180 S1 180 225 5 2.75 3.05 6 3.05 3.35 7 3.35 3.65 IV VF Unit Condition mcd IF=20mA V IF=20mA Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-235-001 Prepared date: 6-Mar-2007 Rev. 2 Page: 4 of 12 Prepared by: Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 23-215A/T1D-CR1S1E/5A Chromaticity Coordinates Specifications for Bin Grading Group Bin Code 1 2 C 3 4 CIE_x CIE_y Condition 0.274 0.274 0.294 0.294 0.274 0.274 0.294 0.294 0.294 0.294 0.314 0.314 0.294 0.294 0.314 0.314 0.226 0.258 0.286 0.254 0.258 0.291 0.319 0.286 0.254 0.286 0.315 0.282 0.286 0.319 0.347 0.315 IF=20mA Notes: 1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01 ). 2.The products are sensitive to static electricity and care must be fully taken when handling products. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-235-001 Prepared date: 6-Mar-2007 Rev. 2 Page: 5 of 12 Prepared by: Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 23-215A/T1D-CR1S1E/5A CIE Chromaticity Diagram Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-235-001 Prepared date: 6-Mar-2007 Rev. 2 Page: 6 of 12 Prepared by: Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 23-215A/T1D-CR1S1E/5A Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-235-001 Prepared date: 6-Mar-2007 Rev. 2 Page: 7 of 12 Prepared by: Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 23-215A/T1D-CR1S1E/5A Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank MSL-2 Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-235-001 Prepared date: 6-Mar-2007 Rev. 2 Page: 8 of 12 Prepared by: Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 23-215A/T1D-CR1S1E/5A Carrier Tape Dimensions: Loaded quantity 5000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-235-001 Prepared date: 6-Mar-2007 Label Rev. 2 Page: 9 of 12 Prepared by: Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 23-215A/T1D-CR1S1E/5A Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 Thermal Shock 4 5 6 7 High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ Test Sample Hours/Cycles Size Ac/Re 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 1000 Hrs. 1000 Hrs. IF = 20 mA 1000 Hrs. 22 PCS. 0/1 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-235-001 Prepared date: 6-Mar-2007 Rev. 2 Page: 10 of 12 Prepared by: Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 23-215A/T1D-CR1S1E/5A Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-235-001 Prepared date: 6-Mar-2007 Rev. 2 Page: 11 of 12 Prepared by: Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 23-215A/T1D-CR1S1E/5A 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-235-001 Prepared date: 6-Mar-2007 Rev. 2 Page: 12 of 12 Prepared by: Jay Chou