Technical Data Sheet
6374/Y5DA-AKMB/X/MS
Features
․High luminous intensity output ․Oval Shape ․Well defined spatial radiation ․Wide viewing angle (2θ1/2) : 70o / 40 o ․UV resistant epoxy ․The product itself will remain within RoHS compliant version.
Descriptions
․This precision optical performance oval LED is specifically designed for passenger information signs ․This lamp has matched radiation patterns with red mixing dual color applications ․Superior performance in outdoor environment
Applications
․Color graphic signs ․Message boards ․Variable message signs (VMS) ․Commercial outdoor advertising
Device Selection Guide
LED Part No. 6374/Y5DA-AKMB/MS 6374/Y5DA-AKMB/P/MS Chip Material Emitted Color AlGaInP Super Yellow Lens Color Yellow Diffused Stopper No Yes
Everlight Electronics Co., Ltd. Device Number : DLE-637-018
http\\:www.everlight.com Prepared date:06-19-2006
Rev 1
Page: 1 of 6
Prepared by: Grace Shen
Technical Data Sheet
6374/Y5DA-AKMB/X/MS
Package Dimensions
Stopper Type No Stopper Type
Notes: ․Other dimensions are in millimeters, tolerance is 0.25mm except being specified. ․Protruded resin under flange is 1.5mm Max LED. ․Bare copper alloy is exposed at tie-bar portion after cutting.
Everlight Electronics Co., Ltd. Device Number : DLE-637-018
http\\:www.everlight.com Prepared date:06-19-2006
Rev 1
Page: 2 of 6
Prepared by: Grace Shen
Technical Data Sheet
6374/Y5DA-AKMB/X/MS
Absolute Maximum Rating (Ta=25℃)
Parameter Forward Current Pulse Forward Current (Duty1/10@ 1KHz) Operating Temperature Storage Temperature Soldering Temperature(Notes *1) Power Dissipation Electrostatic Discharge Reverse Voltage Notes: * Soldering time≦5 seconds. Symbol IF IFP Topr Tstg Tsol * Pd ESD VR Absolute Maximum Rating 50 100 -40 ~ +85 -40 ~ +100 260 ±5 120 2K 5 Unit mA mA ℃ ℃ ℃ mW V V
Electro-Optical Characteristics (Ta=25℃)
Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Half width Forward Voltage Reverse Current Rank Luminous Intensity Symbol IV 2θ1/2 λp λd Δλ VF IR K 1125~1425 Min. 1125 --586 -1.8 -Typ. 1425
X:70Y:40
591 589 15 2.0 -L 1425~1800
Max. 2250 --594 -2.6 10 M 1800~2250
Unit mcd deg nm V μA
Condition
IF=20mA
VR=5V
Rank Combination (IF=20mA)
*Measurement Uncertainty of Luminous Intensity: ±15%
Unit:mcd
Rank Forward Voltage
1 1.8~2.0
2 2.0~2.2
3 2.2~2.4
4 2.4~2.6
Unit:V
*Measurement Uncertainty of Forward Voltage: ±0.1V
Rank Dominant Wavelength
1
2
Unit:nm
586~590 590~594 *Measurement Uncertainty of Dominant Wavelength ±1.0nm
Everlight Electronics Co., Ltd. Device Number : DLE-637-018
http\\:www.everlight.com Prepared date:06-19-2006
Rev 1
Page: 3 of 6
Prepared by: Grace Shen
Technical Data Sheet
6374/Y5DA-AKMB/X/MS
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd. Device Number : DLE-637-018
http\\:www.everlight.com Prepared date:06-19-2006
Rev 1
Page: 4 of 6
Prepared by: Grace Shen
Technical Data Sheet
6374/Y5DA-AKMB/X/MS
Packing Quantity Specification
1.500PCS/1Bag,5Bags/1Box 2.10Boxes/1Carton
Label Form Specification
EVERLIGHT CPN: P/N:
RoHS
6374/Y5DA-AKMB/X/MS QTY: CAT: LOT NO: HUE: REF:
CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks of Luminous Intensity and Forward Voltage HUE: Ranks of Dominant Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place
MADE IN TAIWAN
Everlight Electronics Co., Ltd. Device Number : DLE-637-018
http\\:www.everlight.com Prepared date:06-19-2006
Rev 1
Page: 5 of 6
Prepared by: Grace Shen
Technical Data Sheet
6374/Y5DA-AKMB/X/MS
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering Temp. at tip of iron Soldering time Distance 400℃ Max. (30W Max.) 3 sec Max. 3mm Min.(From solder joint to case) Preheat temp. Bath temp. Bath time. Distance DIP Soldering 100℃ Max. (60 sec Max.) 265 Max. 5 sec Max. 3mm Min.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com
Everlight Electronics Co., Ltd. Device Number : DLE-637-018
http\\:www.everlight.com Prepared date:06-19-2006
Rev 1
Page: 6 of 6
Prepared by: Grace Shen