65-21-GVC-AK2M1Z-3AA

EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Mini Top LEDs (Reverse Gull Wing) (Preliminary) 65-21/GVC-AK2M1Z/3AA Features ․White SMT package. ․Optical indicator. ․Wide viewing angle. ․Soldering methods: IR reflow soldering. ․Available on tape and reel. ․Pb-free ․The product itself will remain within RoHS compliant version. Descriptions ․The 65-21 series is available in soft orange, green, blue, and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. Besides, LED is mounted top down and emits through the PCB. This feature makes the SMT TOP LED ideal for light pipe application. Applications ․Optical indicators. ․Coupling into light guides. ․Backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting). ․Coupling into light guides; Interior automotive lighting (e.g. dashboard backlighting, etc.). Device Selection Guide Chip Emitted Color Material AlGaInP Green Water Clear Resin Color Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 30-Apr-2007 Rev. 3 Page: 1 of 10 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD. 65-21/GVC-AK2M1Z/3AA Package Outline Dimensions Notes: All dimensions are in millimeters. Tolerances unspecified are ±0.1mm. Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 30-Apr-2007 Rev. 3 Page: 2 of 10 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD. 65-21/GVC-AK2M1Z/3AA Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 60 60 2000 -40 ~ +85 -40 ~ +90 Unit V mA mA mW V ℃ ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Symbol Iv 2θ1/2 λp λd Δλ VF IR Min. 9.0 --------563.5 ------------- Typ. ----120 568 ----20 2.0 ----- Max. 22.5 --------571.5 ----2.4 10 Unit mcd deg nm nm nm V μA Condition IF=10mA IF=10mA IF=10mA IF=10mA IF=10mA IF=10mA VR=5V Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 30-Apr-2007 Rev. 3 Page: 3 of 10 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD. 65-21/GVC-AK2M1Z/3AA Bin Range of Dominant Wavelength Group Bin Code C13 A C14 C15 C16 Min 563.5 565.5 567.5 569.5 Max 565.5 567.5 569.5 571.5 mcd IF=10mA Unit Condition Bin Range of Luminous Intensity Bin Code K2 L1 L2 M1 Min 9.0 11.5 14.5 18.0 Max 11.5 14.5 18.0 22.5 mcd IF=10mA Unit Condition Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 30-Apr-2007 Rev. 3 Page: 4 of 10 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD. 65-21/GVC-AK2M1Z/3AA Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 30-Apr-2007 Rev. 3 Page: 5 of 10 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD. 65-21/GVC-AK2M1Z/3AA Packing specification ˙Label explanation (1) CPN：Customer’s Production Number (2) P/N：Production Number (3) QTY：Packing Quantity (4) CAT：Luminous Intensity Rank (5) HUE：Dom. Wavelength Rank (6) REF：Forward Voltage Rank (7) LOT No：Lot Number RoHS ˙Reel Dimensions 2.2 0.5 178.0 1.0 13.0 0.5 9.0 1.0 12.0 1.0 60.0 1.0 Note：Tolerances unless dimension ±0.1mm. Unit = mm Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 30-Apr-2007 Rev. 3 Page: 6 of 10 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD. 65-21/GVC-AK2M1Z/3AA Carrier Tape Dimensions; Loaded quantity per reel 3000 PCS/reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 30-Apr-2007 Rev. 3 Page: 7 of 10 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD. 65-21/GVC-AK2M1Z/3AA Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. 1 Items Reflow Soldering Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH Test Hours/Cycles 6 min Sample Size 22 PCS. Ac/Re 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 4 5 6 7 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 0/1 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 30-Apr-2007 Rev. 3 Page: 8 of 10 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD. 65-21/GVC-AK2M1Z/3AA Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 30-Apr-2007 Rev. 3 Page: 9 of 10 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD. 65-21/GVC-AK2M1Z/3AA 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared date: 30-Apr-2007 Rev. 3 Page: 10 of 10 Prepared by: Ray Yuan