93-21SUGC/S400-A6/TR8

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Performance SMD LED with Reflector 93-21SUGC/S400-A6/TR8 Features ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Eia std. package. ․IC compatible. ․Pb-free. ․The product itself will remain within RoHS compliant version. Applications ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Indicator and backlight for audio and video equipment ․Indicator and backlight for battery driven equipment. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Material Emitted Color InGaN Brilliant Green Everlight Electronics Co., Ltd. Device No. : DSE-0000676 Lens Color Water Clear http://www.everlight.com Rev. 2 prepared date: 30-Dec.-2008 Page: 1 of 9 Prepared by: Ruby Yang EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Performance SMD LED with Reflector 93-21SUGC/S400-A6/TR8 1.7± 0.1 0.5± 0.07 2.2± 0.1 0.4± 0.07 Package Dimensions Anode mark 3.0± 0.1 4.6± 0.2 0.15± 0.05 0.62 +0.13 -0 1.0± 0.1 1.5± 0.1 2.7± 0.1 - + Polarity 0.26± 0.1 0.5± 0.1 For reflow soldering (propose) 0.4± 0.1 4.34± 0.1 0.74± 0.1 0.74± 0.1 Notes: All dimensions are in millimeters. Everlight Electronics Co., Ltd. Device No. : DSE-0000676 http://www.everlight.com Rev. 2 prepared date: 30-Dec.-2008 Page: 2 of 9 Prepared by: Ruby Yang EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Performance SMD LED with Reflector 93-21SUGC/S400-A6/TR8 Absolute Maximum Ratings (Ta=25℃ ℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Electrostatic Discharge(HBM) ESD 2000 V Power Dissipation Pd 110 mW (Duty 1/10 @ 1KHZ) IFP 100 mA Soldering Temperature Tsol Peak Forward Current Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃ ℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous intensity Iv 160 250 ----- mcd IF=20mA Viewing Angle 2θ1/2 ----- 130 ----- deg IF=20mA Peak Wavelength λp ----- 518 ----- nm IF=20mA Dominant Wavelength λd ----- 525 ----- nm IF=20mA Spectrum Radiation Bandwidth △λ ----- 20 ----- nm IF=20mA Forward Voltage VF ----- 3.5 4.3 V IF=20mA Reverse Current IR ----- ----- 50 μA VR=5V Everlight Electronics Co., Ltd. Device No. : DSE-0000676 http://www.everlight.com Rev. 2 prepared date: 30-Dec.-2008 Page: 3 of 9 Prepared by: Ruby Yang EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Performance SMD LED with Reflector 93-21SUGC/S400-A6/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : DSE-0000676 http://www.everlight.com Rev. 2 prepared date: 30-Dec.-2008 Page: 4 of 9 Prepared by: Ruby Yang EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Performance SMD LED with Reflector 93-21SUGC/S400-A6/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Everlight Electronics Co., Ltd. Device No. : DSE-0000676 http://www.everlight.com Rev. 2 prepared date: 30-Dec.-2008 Page: 5 of 9 Prepared by: Ruby Yang EVERLIGHT ELECTRONICS CO.,LTD. Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Technical Data Sheet High Performance SMD LED with Reflector 93-21SUGC/S400-A6/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. : DSE-0000676 http://www.everlight.com Desiccant Rev. 2 prepared date: 30-Dec.-2008 Label Page: 6 of 9 Prepared by: Ruby Yang EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Performance SMD LED with Reflector 93-21SUGC/S400-A6/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 4 5 Test Condition Thermal Shock High Temperature Storage Low Temperature Storage Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-0000676 http://www.everlight.com Rev. 2 prepared date: 30-Dec.-2008 Page: 7 of 9 Prepared by: Ruby Yang EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Performance SMD LED with Reflector 93-21SUGC/S400-A6/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : DSE-0000676 http://www.everlight.com Rev. 2 prepared date: 30-Dec.-2008 Page: 8 of 9 Prepared by: Ruby Yang EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Performance SMD LED with Reflector 93-21SUGC/S400-A6/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : DSE-0000676 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Rev. 2 prepared date: 30-Dec.-2008 Page: 9 of 9 Prepared by: Ruby Yang