EALP05RDEWA3

LAMP EALP05RDEWA3 Features • Popular T-1 3/4 round package • High luminous power • Typical chromaticity coordinates x=0.30, y=0.29 according to CIE1931 • Bulk, available taped on reel. • ESD-withstand voltage: up to 4KV • The product itself will remain within RoHS compliant version Description • The series is designed for application required high luminous intensity. • The phosphor filled in the reflector converts the blue emission of InGaN chip to ideal white. Applications • Message panels • Optical Indicators • Backlighting • Marker Lights 1 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Mar.18, 2013.. Issue No: 1 www.everlightamericas.com DATASHEET LAMP EALP05RDEWA3 Device Selection Guide Chip Emitted Color Materials InGaN Resin Color White Water Clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Continuous Forward Current IF 30 mA Peak Forward Current (Duty 1/10 @ 1KHZ) IFP 100 mA Reverse Voltage VR 5 V Power Dissipation Pd 110 mW Operating Temperature Topr -40 ~ +85 ℃ Tstg -40 ~ +100 ℃ ESDHBM 4K V Zener Reverse Current Iz 100 mA Soldering Temperature Tsol Storage Temperature ESD 260 ℃ for 5 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Forward Voltage VF 2.8 ----- 3.6 V IF=20mA Zener Reverse Voltage Vz 5.2 ----- ----- V Iz=5mA Reverse Current IR ----- ----- 50 μA VR=5V Luminous Intensity IV 14250 ---- 28500 mcd IF=20mA 2θ1/2 ---- 15 ---- deg IF=20mA x ---- 0.30 ---- ---- y ---- 0.29 ---- ---- Viewing Angle Chromaticity Coordinates 2 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Mar.18, 2013.. Issue No: 1 IF =20mA www.everlightamericas.com DATASHEET LAMP EALP05RDEWA3 Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition W X Y 14250 18000 22500 18000 22500 28500 mcd IF =20mA Bin Code Min. Max. Unit Condition 0 1 2 3 2.8 3.0 3.2 3.4 3.0 3.2 3.4 3.6 V IF =20mA Note: Tolerance of Luminous Intensity: ±10% Forward Voltage Combination Note: Measurement Uncertainty of Forward Voltage：±0.1V Color Combination ( at 20mA) 3 Group Bins 4 A0+B5+B6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Mar.18, 2013.. Issue No: 1 www.everlightamericas.com DATASHEET LAMP EALP05RDEWA3 CIE Chromaticity Diagram 0.8 CIE-Y 0.6 5600K 7000K 0.4 9000K 14000K B6 AO B5 0.2 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 CIE-X Color Ranks (IF=20mA，Ta=25℃) Color Ranks A0 B5 B6 CIE X Y X Y X Y 0.264 0.267 0.287 0.295 0.307 0.315 0.283 0.305 0.307 0.315 0.33 0.339 0.296 0.267 0.311 0.294 0.33 0.318 0.28 0.248 0.296 0.276 0.311 0.294 *Measurement uncertainty of the color coordinates：±0.01 4 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Mar.18, 2013.. Issue No: 1 www.everlightamericas.com DATASHEET LAMP EALP05RDEWA3 Typical Electro-Optical Characteristics Curves Relative Intensity vs. Wavelength (Ta=25℃) Directivity (Ta=25℃) O 1.0 O 90 O 60 O 30 0 O 10 O 20 Relative Luminusity Relative Intensity(a.u.) 0.8 Radiation Angle Relative Intensity (a.u.) 1.0 0.6 0.4 0.2 O 40 O 50 O 60 0.5 O 70 O 80 O 0 0.0 350 400 450 500 550 600 650 700 750 0 800 Forward Current vs. Forward Voltage (Ta=25℃) 90 1.0 0.5 Radiation Angle Relative Intensity (a.u.) Wavelength(nm) Wavelength (nm) Relative Intensity vs. Forward Current (Ta=25℃) 30 1.5 Relative Intensity(a.u.) 25 Forward Current (mA) O 30 20 15 10 5 0 1.5 1.0 0.5 0.0 2.0 2.5 3.0 3.5 4.0 4.5 0 5 Forward Voltage (V) 10 15 20 25 Forward Current (mA) Forward Current vs. Ambient Temp. Chromaticity Coordinate vs. Forward Current(Ta=25℃) 0.330 0.310 x 0.300 y 0.290 0.280 0.270 0.260 0 10 20 30 Forward Current(mA) Forward Current (mA) 5 40 50 Forward Current(mA) Forward Current (mA) Chromaticity Coordinate Relative Intensity(a.u.) 40 0.320 30 20 10 0 0 20 40 60 80 100 O AmbientTemperature TemperatureTa(℃) Ta( C) Ambient Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Mar.18, 2013.. Issue No: 1 www.everlightamericas.com DATASHEET LAMP EALP05RDEWA3 Package Dimension Note: 1.All dimensions are in millimeters, and tolerance is 0.25mm except being specified. 2.Lead spacing is measured where the lead emerges from the package. 3.Protruded resin under flange is 1.5mm Max. LED. 6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Mar.18, 2013.. Issue No: 1 www.everlightamericas.com DATASHEET LAMP EALP05RDEWA3 Moisture Resistant Packing Materials Label Explanation ‧ ‧ ‧ ‧ ‧ ‧ ‧ CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks of Luminous Intensity and Forward Voltage HUE: Color Rank REF: Reference LOT No: Lot Number Packing Specification ■ Anti-electrostatic bag ■ Inner Carton ■ Outside Carton Pb EL ECTROSTATIC ELECTRONAGNETIC MAGNETIC OR RADIOACTIVE RELDS anti-static for 750 Packing Quantity 1. Min 200 to Max 500 PCS/1 Bag, 5 Bags/1 Inner Carton 2. 10 Inner Cartons/1 Outside Carton ■ 7 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Mar.18, 2013.. Issue No: 1 www.everlightamericas.com DATASHEET LAMP EALP05RDEWA3 Notes 1. Lead Forming  During lead formation, the leads should be bent at a point at least 3mm from the base of the epoxy bulb.  Lead forming should be done before soldering.  Avoid stressing the LED package during leads forming. The stress to the base may damage the LED’s characteristics or it may break the LEDs.  Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures may cause failure of the LEDs.  When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the lead position of the LED. If the LEDs are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the LEDs. 2. Storage  The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from EVERLIGHT AMERICAS and the storage life limits are 3 months. If the LEDs are stored for 3 months or more, they can be stored for a year in a sealed container with a nitrogen atmosphere and moisture absorbent material.  Please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can occur. 3. Soldering  Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to epoxy bulb, and soldering beyond the base of the tie bar is recommended.  Recommended soldering conditions: Hand Soldering 300℃ Max. (30W Temp. at tip of iron Max.) Soldering time 3 sec Max. Distance 3mm Min.(From solder joint to epoxy bulb) 8 DIP Soldering 100℃ Max. (60 sec Preheat temp. Max.) Bath temp. & time 260 Max., 5 sec Max Distance 3mm Min. (From solder joint to epoxy bulb) Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Mar.18, 2013.. Issue No: 1 www.everlightamericas.com DATASHEET LAMP EALP05RDEWA3  Recommended soldering profile laminar wave Fluxing Prehead  Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering.  Dip and hand soldering should not be done more than one time  After soldering the LEDs, the epoxy bulb should be protected from mechanical shock or vibration until the LEDs return to room temperature.  A rapid-rate process is not recommended for cooling the LEDs down from the peak temperature.  Although the recommended soldering conditions are specified in the above table, dip or handsoldering at the lowest possible temperature is desirable for the LEDs.  Wave soldering parameter must be set and maintain according to recommended temperature and dwell time in the solder wave. 4. Cleaning  When necessary, cleaning should occur only with isopropyl alcohol at room temperature for a duration of no more than one minute. Dry at room temperature before use.  Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence of ultrasonic cleaning on the LEDs depends on factors such as ultrasonic power and the assembled condition. Ultrasonic cleaning shall be pre-qualified to ensure this will not cause damage to the LED 5. Circuit Protection  Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through the zener branch to keep the voltage at exactly Vz.  When the LED is connected using serial circuit, if either piece of LED is no light up but current can’t flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light up. 9 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Mar.18, 2013.. Issue No: 1 www.everlightamericas.com DATASHEET LAMP EALP05RDEWA3 6. Heat Management  Heat management of LEDs must be taken into consideration during the design stage of LED application. The current should be de-rated appropriately by referring to the de-rating curve found in each product specification.  The temperature surrounding the LED in the application should be controlled. Please refer to the data sheet de-rating curve. 7. ESD (Electrostatic Discharge)  Electrostatic discharge (ESD) or surge current (EOS) can damage LEDs.  An ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling LEDs.  All devices, equipment and machinery must be properly grounded.  Use ion blower to neutralize the static charge which might have built up on surface of the LEDs plastic lens as a result of friction between LEDs during storage and handing. 8. Other  Above specification may be changed without notice. EVERLIGHT AMERICAS will reserve authority on material change for above specification.  When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT AMERICAS assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets.  These specification sheets include materials protected under copyright of EVERLIGHT AMERICAS Inc.. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT AMERICAS’s consent. 10 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Mar.18, 2013.. Issue No: 1 www.everlightamericas.com