EAPL2812GA0

SMD  Side View LEDs (0.8mm) EAPL2812GA0 PRELIMINARY Features ․Side view LED. ․Lead frame package with individual 2 pins. ․Wide viewing angle. ․Soldering methods: IR reflow soldering. ․ESD protection. ․Pb-free. ․The product itself will remain within RoHS compliant version. Description Due to the package design, this series has wide viewing angle , low power consumption and white LEDs are devices . This feature makes the LED ideal for light guide application. Applications ․LCD Back Light. ․Mobile phones . ․Indicators. ․Illuminations. ․Switch Lights. 1 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  Side View LEDs (0.8mm) EAPL2812GA0 Device Selection Guide Chip Materials InGaN Emitted Color Resin Color Brilliant Green Water Clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA IFP 100 mA Power Dissipation Pd 95 mW Junction Temperature Tj 115 ℃ Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Rth J-A 600 K/W Rth J-S 400 K/W ESDHBM 2000 V (Classification acc. AEC Q101) ESDMM 200 V Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Thermal Resistance ESD 2 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Side View LEDs (0.8mm) EAPL2812GA0 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 1120 ----- 2250 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- 518 ----- nm IF=20mA Dominant Wavelength λd 520 ---- 535 nm IF=20mA Spectrum Radiation Bandwidth Δλ ----- 35 ----- nm IF=20mA Forward Voltage VF 2.75 ---- 3.65 V IF=20mA Reverse Current IR ----- ----- 50 μA VR=5V Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 3 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Side View LEDs (0.8mm) EAPL2812GA0 Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition W1 W2 X1 1120 1420 1800 1420 1800 2250 mcd IF =20mA Note: Tolerance of Luminous Intensity: ±11% Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition X Y Z 520 525 530 525 530 535 nm IF =20mA Note: Tolerance of Dominant Wavelength: ±1nm Bin Range of Forward Voltage Bin Code Min. Max. Unit Condition 5 6 7 2.75 3.05 3.35 3.05 3.35 3.65 V IF =20mA Note: Tolerance of Forward Voltage: ±0.1V 4 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Side View LEDs (0.8mm) EAPL2812GA0 Typical Electro-Optical Characteristics Curves 5 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Side View LEDs (0.8mm) EAPL2812GA0 Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Side View LEDs (0.8mm) EAPL2812GA0 Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note: Tolerances unless mentioned ±0.1mm. Unit = mm 7 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Side View LEDs (0.8mm) EAPL2812GA0 Moisture Resistant Packing Process Note: Tolerances unless mentioned ±0.1mm. Unit = mm Precautions for Use 1. Over-current-proof 1.1 Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 260¢X C Max. 10sec. Max. Above255¢X C 30sec.Max. 3¢X C/sec.Max. 6¢X C/sec.Max. Pre-heating Above 217¢X C 60~150sec. 150~200¢X C 60~120sec. 2. Storage 2.1 Moisture proof bag should only be opened immediately prior to usage. 2.2 Environment should be less than 30℃ and 60% RH when moisture proof bag is opened. 2.3 After opening the package MSL Conditions stated on page 1 of this spec should not be exceeded. 2.4 If the moisture sensitivity card indicates higher than acceptable moisture, the component should be baked at min. 60deg +/-5deg for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less 8 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Side View LEDs (0.8mm) EAPL2812GA0 than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. Revision History 9 Rev. Modified date File modified contents 1 2014/05/08 New Spec Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com