EAPL3232RGBA0

SMD  REFLECTOR EAPL3232RGBA0 Features ․ ․ ․ ․ ․ ․ ․ Package in 12mm tape on 7〞diameter reel Compatible with automatic placement equipment Various Compatible with infrared and vapor phase reflow solder process 6 Pins for separate control of each chip and better thermal management Good color fidelity and brightness uniformity across the viewing angle Pb-free RoHS compliant Description ․ The SMD LED package provides a perfect solution when users need a clear view of signage display with any size board with 3 in 1 full color SMD LEDs which offer smaller pixel pitch between two LEDs to create a high resolution and better contrast with its black surface design. Applications ․ ․ ․ ․ Indoor signage display applications Indicator and backlighting for all consumer electronics. Gaming equipment. General use. 1 Copyright Revision : 1 © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Jul.03.2013. Issue Release Date:2014-08-06 17:04:13.0 www.everlightamericas.com No:DSE-0011909 Rev.1 LifecyclePhase: Expired Period: Forever DATASHEET SMD  REFLECTOR EAPL3232RGBA0 Device Selection Guide Chip Materials Emitted Color AlGaInP Brilliant Red InGaN Brilliant Green InGaN Brilliant Blue Resin Color Water Diffuse Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR V Forward Current IF 5 R:50 G:30 B:30 R:100 G:100 B:100 R:130 G:110 B:110 Peak Forward Current (Duty 1/10 @1KHz) IFP mA mA Power Dissipation Pd Junction Temperature Tj 100 ℃ Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 R:2000 G:1000 B:1000 ℃ ESD (Classification acc. AEC Q101) Soldering Temperature ESDHBM Tsol mW V Reflow Soldering : 260 ℃ for 30 sec. Hand Soldering : 350 ℃ for 3 sec. 2 Copyright Revision : 1 © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Jul.03.2013. Issue Release Date:2014-08-06 17:04:13.0 www.everlightamericas.com No: DSE-0011909 Rev.1 LifecyclePhase: Expired Period: Forever DATASHEET SMD  REFLECTOR EAPL3232RGBA0 Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Symbol Iv Min. Typ. Max. R 435 ----- 900 G 1045 ----- 2210 B 280 ----- 485 ----- 120 2θ1/2 R Peak Wavelength Λp G Λd ----- Spectrum Radiation Bandwidth 620.0 G 522.0 B 462.0 G Reverse Current VF IR IF=20mA ----- deg IF=20mA 518 ----- nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA μA VR=5V 629.0 ----- 534.0 474.0 20 ----- B Forward Voltage mcd 468 R R Δλ Condition 632 B Dominant Wavelength Unit ----- 25 25 R 1.75 G 2.75 B 2.75 ----- 2.55 ----- 3.35 3.35 ----- 10 Note: 1. Tolerance of Luminous Intensity: ±10% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 3 Copyright Revision : 1 © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Jul.03.2013. Issue Release Date:2014-08-06 17:04:13.0 www.everlightamericas.com No: DSE-0011909 Rev.1 LifecyclePhase: Expired Period: Forever DATASHEET SMD  REFLECTOR EAPL3232RGBA0 Bin Range of Luminous Intensity(Red) Bin Code Min. Max. Unit Condition RA RB RC RD 435 520 625 750 520 625 750 900 mcd IF =20mA Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition R1 R2 R3 620.0 623.0 626.0 623.0 626.0 629.0 nm IF =20mA Bin Range of Luminous Intensity(Green) Bin Code Min. Max. Unit Condition GA GB GC GD 1045 1275 1530 1840 1275 1530 1840 2210 mcd IF =20mA Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition G1 G2 G3 G4 522.0 525.0 528.0 531.0 525.0 528.0 531.0 534.0 nm IF =20mA Note: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm 4 Copyright Revision : 1 © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Jul.03.2013. Issue Release Date:2014-08-06 17:04:13.0 www.everlightamericas.com No: DSE-0011909 Rev.1 LifecyclePhase: Expired Period: Forever DATASHEET SMD  REFLECTOR EAPL3232RGBA0 Bin Range of Luminous Intensity(Blue) Bin Code Min. Max. Unit Condition BA BB BC 280 335 400 335 400 485 mcd IF =20mA Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition B1 B2 B3 B4 462.0 465.0 468.0 471.0 465.0 468.0 471.0 474.0 nm IF =20mA Note: 1. Tolerance of Luminous Intensity: ±10% 2. Tolerance of Dominant Wavelength: ±1nm 5 Copyright Revision : 1 © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Jul.03.2013. Issue Release Date:2014-08-06 17:04:13.0 www.everlightamericas.com No: DSE-0011909 Rev.1 LifecyclePhase: Expired Period: Forever DATASHEET SMD  REFLECTOR EAPL3232RGBA0 Typical Electro-Optical Characteristics Curves Relative luminous intensity (%) Spectrum Distribution Ta=25°C 100 RED GREEN BLUE 75 50 25 0 400 450 500 550 650 600 700 Wavelength λ (nm) Forward Current Derating Curve Ta=25°C 50 40 30 25 20 BLUE RED 5 Relative luminous intensity Forward Current IF (mA) Forward Current vs.Forward Voltage GREEN 10 0 1.6 2.0 2.4 2.8 3.0 3.4 3.8 4.2 4 3 RED BLUE 2 GREEN 1 0 ForwardFVoltage V (V) Radiation Diagram 0 20 40 60 80 100 Forward Current I FP (mA) Ta=25°C 0° 10° 20° Radiation Diagram 0° 10° 30° Ta=25°C 20° 30° RED GREEN BLUE 40° 1.0 0.9 50° 0.8 60° 0.7 0.5 0.3 0.1 0.2 0.4 0.6 70° 80° 90° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 6 Copyright Revision : 1 © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Jul.03.2013. Issue Release Date:2014-08-06 17:04:13.0 www.everlightamericas.com No: DSE-0011909 Rev.1 LifecyclePhase: Expired Period: Forever DATASHEET SMD  REFLECTOR EAPL3232RGBA0 Typical Electro-Optical Characteristics Curves Ambient Temperature vs. Ambient Temperature vs. Total Power Dissipation Power Dissipation 250 200 RED 150 GREEN 100 BLUE 50 0 0 20 40 60 85 Ambient Temperature Ta (°C) 100 Total Power Dissipation(mW) Total Power Dissipation (mW) 250 200 150 100 50 0 0 20 40 60 85 100 Ambient Temperature Ta (°C) 7 Copyright Revision : 1 © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Jul.03.2013. Issue Release Date:2014-08-06 17:04:13.0 www.everlightamericas.com No: DSE-0011909 Rev.1 LifecyclePhase: Expired Period: Forever DATASHEET SMD  REFLECTOR EAPL3232RGBA0 Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 8 Copyright Revision : 1 © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Jul.03.2013. Issue Release Date:2014-08-06 17:04:13.0 www.everlightamericas.com No: DSE-0011909 Rev.1 LifecyclePhase: Expired Period: Forever DATASHEET SMD  REFLECTOR EAPL3232RGBA0 Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions 9 Copyright Revision : 1 © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Jul.03.2013. Issue Release Date:2014-08-06 17:04:13.0 www.everlightamericas.com No: DSE-0011909 Rev.1 LifecyclePhase: Expired Period: Forever DATASHEET SMD  REFLECTOR EAPL3232RGBA0 Carrier Tape Dimensions: Minimum packing amount is 1000 pcs per reel Note: Tolerances unless mentioned ±0.1mm. Unit = mm Moisture Resistant Packing Process Label Aluminum moistue-proof bag Desiccant Label Note: Tolerances unless mentioned ±0.1mm. Unit = mm 10 Copyright Revision : 1 © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Jul.03.2013. Issue Release Date:2014-08-06 17:04:13.0 www.everlightamericas.com No: DSE-0011909 Rev.1 LifecyclePhase: Expired Period: Forever DATASHEET SMD  REFLECTOR EAPL3232RGBA0 Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 168Hrs under 30℃ or less and 60% RH or less.If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260°C Max. 10sec. Max. Above255°C 30sec.Max. 3°C/sec.Max. 6°C/sec.Max. Pre-heating Above 217°C 60~150sec. 150~200°C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 11 Copyright Revision : 1 © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Jul.03.2013. Issue Release Date:2014-08-06 17:04:13.0 www.everlightamericas.com No: DSE-0011909 Rev.1 LifecyclePhase: Expired Period: Forever DATASHEET SMD  REFLECTOR EAPL3232RGBA0 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 6.Directions for use The LEDs should be operated with forward bias. The driving circuit must be designed so that the LEDs are not subjected to forward or reverse voltage while it is off. If reverse voltage is continuously applied to the LEDs, It may cause migration resulting in LED damage. Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight Americas before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 12 Copyright Revision : 1 © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Jul.03.2013. Issue Release Date:2014-08-06 17:04:13.0 www.everlightamericas.com No: DSE-0011909 Rev.1 LifecyclePhase: Expired Period: Forever