EAPL3527WA2

SMD  TOP View LEDs EAPL3527WA2 PRELIMINARY Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free ․The product itself will remain within RoHS compliant version. Description This series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications • Automotive: backlighting in dashboard and switch. • Telecommunication: indicator and backlighting in telephone and fax. • Flat backlight for LCD, switch and symbol. • Light pipe application. • General use. 1 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  TOP View LEDs EAPL3527WA2 Device Selection Guide Chip Materials InGaN Emitted Color Resin Color White Yellowish Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA IFP 100 mA Power Dissipation Pd 110 mW Junction Temperature Tj 115 ℃ Operating Temperature Topr -40 ~ +85 ℃ Tstg -40 ~ +90 ℃ Rth J-A 600 K/W Rth J-S 400 K/W ESD ESDHBM 2000 V (Classification acc. AEC Q101) ESDMM 200 V Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Storage Temperature Thermal Resistance 2 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527WA2 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 450 ----- 1120 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Forward Voltage VF 2.75 ---- 3.95 V IF=20mA Reverse Current IR ----- ----- 50 μA VR=5V Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition U1 U2 V1 V2 450 565 715 900 565 715 900 1120 mcd IF =20mA Note: Tolerance of Luminous Intensity: ±11% Bin Range of Forward Voltage Bin Code Min. Max. Unit Condition 5 6 7 8 2.75 3.05 3.35 3.65 3.05 3.35 3.65 3.95 V IF =20mA Note: Tolerance of Forward Voltage: ±0.1V 3 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527WA2 Bin Range of Chromaticity Coordinate Bin Code A0 B3 B4 B5 B6 CIE_x CIE_y Unit Condition 0.280 0.264 0.283 0.296 0.287 0.283 0.304 0.307 0.307 0.304 0.330 0.330 0.296 0.287 0.307 0.311 0.311 0.307 0.330 0.330 0.248 0.267 0.305 0.276 0.295 0.305 0.330 0.315 0.315 0.330 0.360 0.339 0.276 0.295 0.315 0.294 0.294 0.315 0.339 0.318 nm IF =20mA Note: Tolerance of Chromaticity Coordinates: ±0.01 The C.I.E. 1931 Chromaticity Diagram 4 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527WA2 Typical Electro-Optical Characteristics Curves Spectrum Distribution Forward Current vs. Forward Voltage Ta=25¢X C Forward Current 75 50 25 0 400 500 600 700 40 30 20 10 0 2.4 800 2.6 3.0 3.4 3.8 4.2 Forward Voltage (VF)-volts Relative Luminous Intensity vs. Relative Luminous Intensity vs Ambient Temperature Forward Current 1000 Relative luminous intensity (%) Relative luminous intensity (%) Wavelength £f(nm) 100 10 1 -60 -40 -20 0 20 40 60 80 100 1000 10 1 0 10 1 2 10 10 Forward Current IF(mA) Radiation Diagram Forward Current Derating Curve Ta=25¢X C 0¢X 10¢X 20¢X 30¢X 50 Forward Current I (mA) F Ta=25¢X C f=1KHz Duty=1/10 100 Ambient Temperature Ta (¢X C) 40 40¢X 30 1.0 20 10 0.9 50¢X 0.8 60¢X 70¢X 0.7 0 5 Ta=25¢X C 50 I F (mA) Relative luminous intensity (%) 100 20 40 60 80 100 Ambient Temperature Ta (¢X C) 80¢X 90¢X 0.5 0.3 0.1 0.2 0.4 0.6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527WA2 Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527WA2 Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note: Tolerances unless mentioned ±0.1mm. Unit = mm 7 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527WA2 Moisture Resistant Packing Process Note: Tolerances unless mentioned ±0.1mm. Unit = mm Precautions for Use 1. Over-current-proof 1.1 Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 260¢X C Max. 10sec. Max. Above255¢X C 30sec.Max. 3¢X C/sec.Max. 6¢X C/sec.Max. Pre-heating Above 217¢X C 60~150sec. 150~200¢X C 60~120sec. 2. Storage 2.1 Moisture proof bag should only be opened immediately prior to usage. 2.2 Environment should be less than 30℃ and 60% RH when moisture proof bag is opened. 2.3 After opening the package MSL Conditions stated on page 1 of this spec should not be exceeded. 2.4 If the moisture sensitivity card indicates higher than acceptable moisture, the component should be baked at min. 60deg +/-5deg for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less 8 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527WA2 than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. Revision History 9 Rev. Modified date File modified contents 1 2014/4/30 New Spec Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com