EAPLTBA0

Photolink- Fiber Optic Receiver EAPLTBA0 Features • High speed signal transmission(25Mbps NRZ Signal) • TTL interface compatible • +3~+5V single power source •The product itself will remain within RoHS compliant version. Description The opto-electrical component is assembled with a 660nm AlGaInP LED and a driver IC. It transforms the electrical signal to optical signal and be transmitted by 1mm diameter plastic optical fiber. The component is operated at +3~+5V and has good performance at low dissipation current, steady light output and efficient light coupling. Applications • Digital audio equipment • CD player • DVD player Device Selection Guide Chip 1 Material λp(nm) Operating Voltage (Vcc) AlGaInP 660 +3.0~5.0 Dissipation Current (mA) Fiber Coupling Light Output (dBm) Typ. Max. Min. Typ. Max. 5.5 10 -21 --- -15 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 05.22.2013. Issue No: 1 www.everlightamericas.com DATASHEET Photolink- Fiber Optic Receiver EAPLTBA0 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Supply Voltage Vcc -0.5 to 7 V DC Input Voltage Vin -0.5 to Vcc+0.5 V Storage Temperature Tstg -40 to 85 ºC Operating Temperature Topr -40 to 85 ºC Soldering Temperature Tsol 260* ºC Human Body Model ESD HBM 3K V Machine Model ESD MM 300 V Notes: Soldering time≦10 seconds. Recommended Operating Conditions Parameter Supply Voltage Symbol Conditions MIN. TYP. MAX. Unit Vcc - 2.7 3.0 5.50 V Electro-Optical Characteristics (Ta=25℃) Parameter Peak Emission Wavelength Symbol Conditions MIN. TYP. MAX. Unit 640 660 680 nm NRZ Signal DC - 25 Mbps p Transmission Rate Fiber Coupling Output Power Pf * Measuring Method 1 -21 - -15 dBm Dissipation Current Icc * Measuring Method 1 3 - 10 mA High Level Input Voltage Vih 2 - - V Low Level Input Voltage Vil - - 0.8 V Rise Time Tr - 15 20 ns Fall Time Tf [1] ; *2 NRZ Code VFLED = 2.0V - 15 20 ns Low to High Delay Time tpLH * Measuring Method 2 - - 100 ns High to Low Delay Time tpHL * Measuring Method 2 - - 100 ns Pulse Width Distortion tw * Measuring Method 2 -15 - 15 ns Jitter tj * Measuring Method 2 - 1.5 15 ns *Note 1 : All Plastic Optical Fiber（980/1000um） 2 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 06.22.2013.. Issue No: 1 www.everlightamericas .com DATASHEET Photolink- Fiber Optic Receiver EAPLTBA0 *Circuit Layout Notice: When power is off, it must be cut off together in Vin and Vcc pin. If it only has Vcc power-off, LED will sure to be no output power Vcc Vin 2.7~5.5V 2.7~5.5V 2.7~5.5V FLOATING High Low FLOATING 0~Vcc LED Condition ON OFF OFF OFF Measuring Method *1 Measuring method of optical output coupling fiber and dissipation current Standard plastic optic fiber cable EAPLTBA0 Receiver PLT132 Transmitter Unit Unit Vin Vcc Icc GND Optical power meter ADVANTEST Q8221 The optical power meter must be calibrated to have the wavelength sensitivity of 660nm ( 0 dBm = 1mW) 0.1uF Signal Input DC 3 5V Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 06.22.2013.. Issue No: 1 www.everlightamericas .com DATASHEET Photolink- Fiber Optic Receiver EAPLTBA0 *2 Pulse response measuring method Standard plastic optic fiber cable EAPLTBA0 Receiver PLT132 Transmitter Unit Unit Vin Vcc Standard Receiver Unit GND 0.1uF Signal Input 5V CH1 16Mbps NRZ "0101" successive signal input TPLH 4 TPHL Input 50% Output 50% tj1 CH2 tj2 tr tw = TPHL-TPLH tf tr = 10% --> 90% Rise Time tf = 90% --> 10% Fall Time Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 06.22.2013.. Issue No: 1 www.everlightamericas .com DATASHEET Photolink- Fiber Optic Receiver EAPLTBA0 Package Dimension Pin Function 1 : GND 2 : Vcc 3 : Vin 3 2 1 Note: 1.All dimensions are in mm. 2.General Tolerance: ±0.10 mm. 3. Device Selection Table 5 Device Name Pin Length A1 (mm) Device Name Pin Length A1 (mm) EAPLTBA0/L5 Min 28.00 EAPLTBA0/S11 7.80±0.25 EAPLTBA0/S 8.600.25 EAPLTBA0/S12 8.30±0.25 EAPLTBA0/S1 2.800.25 EAPLTBA0/S13 7.50±0.25 EAPLTBA0/S2 3.300.25 EAPLTBA0/S16 15.00±0.5 EAPLTBA0/S3 3.600.25 EAPLTBA0/S17 15.00+1/-0 EAPLTBA0/S4 4.100.25 EAPLTBA0/S18 6.50±0.25 EAPLTBA0/S5 5.950.25 EAPLTBA0/S19 16.00±0.2 EAPLTBA0/S6 24.150.5 EAPLTBA0/S20 23.50±0.2 EAPLTBA0/S7 27.800.5 EAPLTBA0/S21 22.00±0.5 EAPLTBA0/S8 6.70±0.25 EAPLTBA0/S23 6.00±0.25 EAPLTBA0/S9 8.00±0.25 EAPLTBA0/S24 11.50±0.5 EAPLTBA0/S10 10.00±0.5 EAPLTBA0/S26 6.25±0.25 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 06.22.2013.. Issue No: 1 www.everlightamericas .com DATASHEET Photolink- Fiber Optic Receiver EAPLTBA0 Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number ‧X: Month ‧Reference: Identify Label Number Packing Quantity Specification 1. 500 or 1000 pcs/bag 2. 8 bag/box Notes 1. 2. 3. 6 Above specification may be changed without notice. EVERLIGHT Americas will reserve authority on material change for above specification. .When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT Americas assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. These specification sheets include materials protected under copyright of EVERLIGHT Americas corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT Americas’s consent. Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 06.22.2013.. Issue No: 1 www.everlightamericas .com