MAN6440_LIJ

0.560-INCH SEVEN SEGMENT DISPLAYS HIGH EFFICIENCY GREEN MAN6400 SERIES Description PACKAGE DIMENSIONS .985" (25.02 mm) ±.010" .500" (12.70 mm) A A F .750" (19.05 mm) +.010" E .066" DIA (1.68 mm) DIGIT = 1 PART IDENTIFICATION PART NO. .020" (0.51 mm) +.004" -.000" E DP D C DP Features .160" (4.06 mm) +.015" .315" (8.00 mm) ±.010" XYY Z PIN #1 (NOTE SQUARE .100" (2.54 mm) BASE ON LEAD) C D B G LIGHT INTENSITY CAT. 8° DATE CODE .320" (8.13 mm) B G .560" (14.22 mm) F .050" +.004" -.000" (1.27 mm) .010" (0.25 mm) +.007" -.000" .600" (15.24 mm) +.015" .480" (12.20 mm) ±.010" A .560" +0.010" (14.22 mm) .750" (19.05 mm) +.010" F E G D B C DP .320" (8.13 mm) PART IDENTIFICATION PIN #1 .100" TYP (2.54 mm) .066" DIA 8° LIGHT INTENSITY CAT. DATE CODE .160" (4.06 mm) +.015" .315" (8.00 mm) ±.010" PART NO. XYY Z .050" (1.27 mm) .020" (0.51 mm) +.004" -.000" The MAN6400 Series is a family of large digits which includes double and single digits. The series features the sculptured font which minimizes “gappiness” at the segment intersections. All models have right hand decimal points and are available in common anode or common cathode configuration. This device has a Grey face and clear segments to enhance ON and OFF contrast. • High Efficiency Green nitrogen-doped GaAsP on GaP • Large, easy to read, digits • Common anode or common cathode models • Fast switching — excellent for multiplexing • Low power consumption • Bold solid segments that are highly legible • Solid state reliability — long operation life • Rugged plastic construction • Directly compatible with integrated circuits • High brightness with high contrast • Categorized for Luminous Intensity (See Note 5) • Wide angle viewing...150° • Low forward voltage • Two-digit package simplifies alignment and assembly Applications For industrial and consumer applications such as: PIN #5 .600" (15.24 mm) +.015" .010" (0.25 mm) +.007" -.000" • • • • • Digital readout displays Instrument panels Point of sale equipment Digital clocks TV and radios MODEL NUMBERS Part Number Color Description Package Drawing Pin Out Specification MAN6410 High Eff. Green 2 Digit; Common Anode; Rt. Hand Decimal A A MAN6440 High Eff. Green 2 Digit; Common Cathode; Rt. Hand Decimal A B MAN6460 High Eff. Green Single Digit; Common Anode; Rt. Hand Decimal B C MAN6980 High Eff. Green Single Digit; Common Cathode; Rt. Hand Decimal B D © 2003 Fairchild Semiconductor Corporation Page 1 of 6 7/16/03 0.560-INCH SEVEN SEGMENT DISPLAYS HIGH EFFICIENCY GREEN MAN6400 SERIES RECOMMENDED OPTICAL FILTERS For optimum ON and OFF contrast, one of the following filters or equivalents should be used over the display: Device Type Filter Panelgraphic Green 48 Homalite 100-1440 Green Panelgraphic Grey 10 Homalite 100-1266 Grey MAN6400 Series ELECTRO-OPTICAL CHARACTERISTICS (Per Diode 25°C Free Air Temperature Unless Otherwise Specified) Luminous Intensity, digit average (See Note 1) Peak emission wavelength Spectral line half width Forward voltage Segment Decimal point Dynamic resistance Segment Decimal point Capacitance Segment Decimal point Reverse current Segment Decimal point Ratio IL Min. Typ. 510 2200 565 30 Units Test Conditions µcd nm nm IF = 10 mA V V IF = 20 mA IF = 20 mA 26 26 Ω Ω IF = 20 mA IF = 20 mA 35 35 pF pF V=0 V=0 µA µA — VR = 3.0V VR = 3.0V IF = 10 mA 2.1 2.1 Max. 2.8 2.8 100 100 2:1 ABSOLUTE MAXIMUM RATINGS MAN64X0 Power dissipation at 25°C ambient Derate linearly from 50°C Storage and operating temperature Continuous forward current Total Per segment Decimal point Reverse voltage Per segment Decimal point Soldering time at 260°C (See Notes 3 and 4) © 2003 Fairchild Semiconductor Corporation 600mW -40°C to +85°C 30 mA 30 mA 6.0 V 6.0 V 5 sec. Page 2 of 6 7/16/03 0.560-INCH SEVEN SEGMENT DISPLAYS HIGH EFFICIENCY GREEN MAN6400 SERIES TYPICAL THERMAL CHARACTERISTICS Thermal resistance junction to free air φJA 160°C/W Wavelength temperature coefficient (case temperature) 1.0Å/°C Forward voltage temperature coefficient -2.0 mV/°C Notes: 1. The digit average Luminous Intensity is obtained by summing the Luminous Intensity of each segment and dividing by the total number of segments. Intensity will not vary more than ±33.3% between all segments within a digit. 2. The curve in Figure 3 is normalized to the brightness at 25°C to indicate the relative efficiency over the operating temperature range. 3. Leads of the device immersed to 1/16 inch from the body. Maximum device surface temperature is 140°C. 4. For flux removal, Freon TF, Freon TE, Isoproponal or water may be used up to their boiling points. 5. All displays are categorized for Luminous Intensity. The Intensity category is marked on each part as a suffix letter to the part number. ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS Pin No. A MAN6410 B MAN6440 C MAN6460 D MAN6480 1 Cathode E 1 Anode E 1 Cathode E Anode E 2 Cathode D 1 Anode D 1 Cathode D Anode D 3 Cathode C 1 Anode C 1 Common Anode Common Cathode 4 Cathode D.P. 1 Anode D.P. 1 Cathode C Anode C 5 Cathode E 2 Anode E 2 Cathode D.P. Anode D.P. 6 Cathode D 2 Anode D 2 Cathode B Anode B 7 Cathode G 2 Anode G 2 Cathode A Anode A 8 Cathode C 2 Anode C 2 Common Anode Common Cathode 9 Cathode D.P. 2 Anode D.P. 2 Cathode F Anode F 10 Cathode B 2 Anode B 2 Cathode G Anode G 11 Cathode A 2 Anode A 2 12 Cathode F 2 Anode F 2 13 Anode Digit 2 Cathode Digit 2 14 Anode Digit 1 Cathode Digit 1 15 Cathode B 1 Anode B 1 16 Cathode A 1 Anode A 1 17 Cathode G 1 Anode G 1 18 Cathode F 1 Anode F 1 © 2003 Fairchild Semiconductor Corporation Page 3 of 6 7/16/03 0.560-INCH SEVEN SEGMENT DISPLAYS HIGH EFFICIENCY GREEN MAN6400 SERIES 100 90 80 70 60 50 40 30 20 10 0 1.0 Relative Luminous Intensity Forward Current IF = mA TYPICAL CHARACTERISTIC CURVES (Dotted Line Indicates Pulsed Operation See Figs. 3, 5) 2.0 1.0 0 4.0 5 10 15 20 25 DC Forward Current – IF mA 30 Fig. 2. Relative Luminous Intensity vs. DC Forward Current 130 1000 800 600 400 Relative Intensity % Maximum Peak Current mA Normalized at IF = 10 mA 3.0 0 2.0 3.0 Forward Voltage (VF) – Volts Fig. 1 Forward Current vs. Forward Voltage 200 10 100 80 60 40 KH 3.0 z KH 1.0 z KH 30 z 10 0H z 0H z 20 0 4.0 10 100 1000 Pulse Duration µs 100 90 80 -25 0 25 50 75 Temperature – TA °C 100 Fig. 4 Relative Luminous Intensity vs. Temperature Fig. 3 Maximum Peak Current vs. Pulse Duration Relative Efficiency (IL at drive/IL at 10mA DC) 110 70 -55 10000 Normalized at 25°C 120 4.0 IF (AVG) = 20 mA 10 mA 5 mA 2.5 mA 3.0 2.0 1.0 0 2.0 5.0 19 20 % Duty Cycle 50 DC Fig. 5 Relative Efficiency vs. Duty Cycle © 2003 Fairchild Semiconductor Corporation Page 4 of 6 7/16/03 0.560-INCH SEVEN SEGMENT DISPLAYS HIGH EFFICIENCY GREEN MAN6400 SERIES INTERNAL CONNECTIONS 14 FIRST E 1 D 2 C 3 14 13 DIGIT FIRST SECOND DIGIT B A G F DP E 15 16 17 18 4 5 D 6 G 7 C 8 B A F DP 10 11 12 9 E 1 D 2 C 3 13 DIGIT B A G F DP E 15 16 17 18 4 5 MAN6410 3 E 1 D 2 C 4 SECOND DIGIT A 7 3 F 9 E 1 G DP 10 5 MAN6460 © 2003 Fairchild Semiconductor Corporation G 7 C 8 B A F DP 10 11 12 9 MAN6640 8 B 6 D 6 D 2 C 4 8 B 6 A 7 F 9 G DP 10 5 MAN6480 Page 5 of 6 7/16/03 0.560-INCH SEVEN SEGMENT DISPLAYS HIGH EFFICIENCY GREEN MAN6400 SERIES DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. © 2003 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Page 6 of 6 7/16/03