CMM-17

Process Calibrator MultiMeter™ Precision DC, mA, Voltage, Frequency Calibrator Combined with True RMS MultiMeter CMM-17 Features: • Simultaneous source/simulate and measure on large dual display • Precision 0.03% accurate voltage and current calibration source • Constant current output for loads up to 1200Ω mA PROCESS CALIBRATOR MULTIMETER + RS232 MODE SHIFT MAX/MIN °C/°F AUTO OUTPUT V V V V mV Ω V mA V mA mA mA mA • Bipolar current (±25mA) and voltage (±1.5V, ±15V) outputs • Simultaneously source 15V excitation voltage and measure mA output of 2-wire transmitters • % of scale readout for 4 to 20mA or 0 to 20mA • Wide range Frequency (square wave) source with adjustable amplitude, pulse width, and duty cycle • Programmable 16 continuous or timed step outputs, or 999 step ramp • Optional communications software allows you to remotely operate the CMM-17 from your PC and document readings Optional software records output and input and generates calibration report V OFF CAT II 250V True RMS V • mA• V • mA• Ω• DC 15V 25mA MAX FUSED 250V 500mA MAX FUSED DMM Features: • Measure DCmA, ACmA, DCV, ACV, AC+DC, Temperature, Frequency, Duty Cycle, Pulse Width, Resistance, Continuity, and Diode • 1μV or 1μA resolution and 0.03% basic DCV accuracy (400mV-40V) • 1ms Peak Hold for glitch capture, plus Data Hold, Auto Hold, relative and dynamic recording • True RMS measurement for non-linear voltage and current loads Specifications Source (Output) DC Voltage DC Current Square Wave Ranges ±1.5 ±15V ±25mA (Max load 1200Ω) 28 Frequencies Max Res. 100μV 1mV 1μA 0.01Hz Accuracy (% output + digits) ±(0.03% + 3) ±(0.03% + 5) ±(0.005% + 1) Common Features: • Built-in bi-directional RS-232 interface • Built-in NiMH rechargeable battery • Large 50,000 count backlit LCD displays primary, secondary, source/measure ranges and functions selected • Separate input/output banana jacks with fused protection • Auto power off with disable function • Complete kit with input/output test leads, Type K temperature probe, 8 NiMH rechargeable batteries, 100V-250V AC adaptor/recharger, and carrying case Ordering Information: CMM-17 ..............Process Calibrator MultiMeter™ CMM-17-NIST ....CMM-17 with NIST Certificate CMM-17-S ..........PC Software and RS-232 cable (0.5,1,2,5,10,15,20,25,30,40,50,60,75,80,100,120,150,200,240,300,400, 480,600,800,1200,1600,2400,4800 Hz) Duty Cycle 0.39% to 99.60% 0.390625% ±(0.01% + 0.02%) Pulse Width 1/frequency Range/256 ±(0.01% + 0.3ms) Amplitude 5V, ±5V, 12V, ±12V 0.1V ±(2% + 0.2V) Measure (Input) Ranges Max Res. Accuracy (% rdg + digits) DC Voltage 50mV 1μV ±(0.05% + 50d) 500mV, 5V, 50V 10μV ±(0.03% + 5d) 250V 10mV AC Voltage (45-20kHz) 50,500mV, 5,50,250V 1μV ±(1.5% + 20d) @50/60Hz DC Current 50mA, 500mA 1μA ±(0.3% + 5d) AC Current (45Hz-2kHz) 50mA, 500mA 1μA ±(0.6% + 20d) AC + DC Voltage 50,500mV, 5,50,250V 1μV ±(0.8% + 25d) @50/60H AC + DC Current 50mA, 500mA 1μA ±(1.2% + 10d) 1ms Peak Hold (Glitch capture) 50,500mV, 5,50,250V 1μV ±(2% + 400d) 50mA, 500mA 1μA Resistance 500,5k,50k,500k,5MV 0.01V ±(0.15% + 5d) 50MV 1kV ±(1% + 8d) Temperature (Type K) -40°F to 2502°F 1/0.1°F ±(0.3% + 6°F) -40°C to 1372°C 1/0.1°C ±(0.3% + 3°C) Frequency 100Hz,1,10,100,200kHz 0.001Hz ±(0.02% + 3d) Duty Cycle 0.1-99.9% ±(0.3% per kHz +0.3%)FS Pulse Width 0.1-1999.9mS ±(0.2% + 3d) Diode Check / Continuity 0.45mA @