2N4401

2N4401 / MMBT4401 Discrete POWER & Signal Technologies 2N4401 MMBT4401 C E C B TO-92 E SOT-23 Mark: 2X B NPN General Purpose Amplifier This device is designed for use as a medium power amplifier and switch requiring collector currents up to 500 mA. Sourced from Process 19. See PN2222A for characteristics. Absolute Maximum Ratings* Symbol VCEO VCBO VEBO IC TJ, Tstg Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous TA = 25°C unless otherwise noted Parameter Value 40 60 6.0 1.0 -55 to +150 Units V V V A °C Operating and Storage Junction Temperature Range *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD RθJC RθJA TA = 25°C unless otherwise noted Characteristic Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient 2N4401 625 5.0 83.3 200 Max *MMBT4401 350 2.8 357 Units mW mW/°C °C/W °C/W *Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06." ã 1997 Fairchild Semiconductor Corporation 2N4401 / MMBT4401 NPN General Purpose Amplifier (continued) Electrical Characteristics Symbol Parameter TA = 25°C unless otherwise noted Test Conditions Min Max Units OFF CHARACTERISTICS V(BR)CEO V(BR)CBO V(BR)EBO IBL ICEX Collector-Emitter Breakdown Voltage* Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Base Cutoff Current Collector Cutoff Current IC = 1.0 mA, IB = 0 IC = 0.1 mA, IE = 0 IE = 0.1 mA, IC = 0 VCE = 35 V, VEB = 0.4 V VCE = 35 V, VEB = 0.4 V 40 60 6.0 0.1 0.1 V V V µA µA ON CHARACTERISTICS* hFE DC Current Gain IC = 0.1 mA, VCE = 1.0 V IC = 1.0 mA, VCE = 1.0 V IC = 10 mA, VCE = 1.0 V IC = 150 mA, VCE = 1.0 V IC = 500 mA, VCE = 2.0 V IC = 150 mA, IB = 15 mA IC = 500 mA, IB = 50 mA IC = 150 mA, IB = 15 mA IC = 500 mA, IB = 50 mA 20 40 80 100 40 300 0.4 0.75 0.95 1.2 V V V V VCE(sat) VBE(sat) Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage 0.75 SMALL SIGNAL CHARACTERISTICS fT Ccb Ceb hie hre hfe hoe Current Gain - Bandwidth Product Collector-Base Capacitance Emitter-Base Capacitance Input Impedance Voltage Feedback Ratio Small-Signal Current Gain Output Admittance IC = 20 mA, VCE = 10 V, f = 100 MHz VCB = 5.0 V, IE = 0, f = 140 kHz VBE = 0.5 V, IC = 0, f = 140 kHz IC = 1.0 mA, VCE = 10 V, f = 1.0 kHz IC = 1.0 mA, VCE = 10 V, f = 1.0 kHz IC = 1.0 mA, VCE = 10 V, f = 1.0 kHz IC = 1.0 mA, VCE = 10 V, f = 1.0 kHz 250 6.5 30 1.0 0.1 40 1.0 15 8.0 500 30 µ mhos MHz pF pF kΩ x 10 -4 SWITCHING CHARACTERISTICS td tr ts tf Delay Time Rise Time Storage Time Fall Time VCC = 30 V, VEB = 0.2 V, IC = 150 mA, IB1 = 15 mA VCC = 30 V, IC = 150 mA IB1 = IB2 = 15 mA 15 20 225 30 ns ns ns ns *Pulse Test: Pulse Width £ 300 ms, Duty Cycle £ 2.0%