74AC374

74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs January 2008 74AC374, 74ACT374 Octal D-Type Flip-Flop with 3-STATE Outputs Features ■ ICC and IOZ reduced by 50% ■ Buffered positive edge-triggered clock ■ 3-STATE outputs for bus-oriented applications ■ Outputs source/sink 24mA ■ See 273 for reset version ■ See 377 for clock enable version ■ See 373 for transparent latch version ■ See 574 for broadside pinout version ■ See 564 for broadside pinout version with inverted General Description The AC/ACT374 is a high-speed, low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-STATE outputs for bus-oriented applications. A buffered Clock (CP) and Output Enable (OE) are common to all flip-flops. outputs ■ ACT374 has TTL-compatible inputs Ordering Information Order Number 74AC374SC 74AC374SJ 74AC374MTC 74AC374PC 74ACT374SC 74ACT374SJ 74ACT374MSA 74ACT374MTC 74ACT374PC Package Number M20B M20D MTC20 N20A M20B M20D MSA20 MTC20 N20A Package Description 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs Connection Diagram Logic Symbols IEEE/IEC Pin Description Pin Names D0–D7 CP OE O0–O7 Description Data Inputs Clock Pulse Input 3-STATE Output Enable Input 3-STATE Outputs Functional Description The AC/ACT374 consists of eight edge-triggered flipflops with individual D-type inputs and 3-STATE true outputs. The buffered clock and buffered Output Enable are common to all flip-flops. The eight flip-flops will store the state of their individual D inputs that meet the setup and hold time requirements on the LOW-to-HIGH Clock (CP) transition. With the Output Enable (OE) LOW, the contents of the eight flip-flops are available at the outputs. When the OE is HIGH, the outputs go to the high impedance state. Operation of the OE input does not affect the state of the flip-flops. Truth Table Inputs Dn H L X X H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Z = High Impedance = LOW-to-HIGH Transition Outputs OE L L H CP On H L Z ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 2 74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 3 74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC IIK Supply Voltage DC Input Diode Current VI = −0.5V VI = VCC + 0.5 VI IOK DC Input Voltage DC Output Diode Current VO = −0.5V VO = VCC + 0.5V VO IO TSTG TJ DC Output Voltage Parameter Rating −0.5V to +7.0V −20mA +20mA −0.5V to VCC + 0.5V −20mA +20mA −0.5V to VCC + 0.5V ±50mA ±50mA −65°C to +150°C 140°C DC Output Source or Sink Current Storage Temperature Junction Temperature ICC or IGND DC VCC or Ground Current per Output Pin Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Supply Voltage AC ACT VI VO TA ∆V / ∆t ∆V / ∆t Input Voltage Output Voltage Operating Temperature Parameter Rating 2.0V to 6.0V 4.5V to 5.5V 0V to VCC 0V to VCC −40°C to +85°C 125mV/ns 125mV/ns Minimum Input Edge Rate, AC Devices: VIN from 30% to 70% of VCC, VCC @ 3.3V, 4.5V, 5.5V Minimum Input Edge Rate, ACT Devices: VIN from 0.8V to 2.0V, VCC @ 4.5V, 5.5V ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 4 74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs DC Electrical Characteristics for AC TA = +25°C Symbol VIH TA = −40°C to +85°C Units V 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 2.46 3.76 4.76 0.1 0.1 0.1 0.44 0.44 0.44 ±1.0 ±2.5 µA µA V V V Parameter Minimum HIGH Level Input Voltage VCC (V) 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 Conditions VOUT = 0.1V or VCC – 0.1V VOUT = 0.1V or VCC – 0.1V IOUT = –50µA Typ. 1.5 2.25 2.75 1.5 2.25 2.75 2.99 4.49 5.49 2.1 Guaranteed Limits 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 2.56 3.86 4.86 VIL Maximum LOW Level Input Voltage VOH Minimum HIGH Level Output Voltage VIN = VIL or VIH, IOH = –12mA VIN = VIL or VIH, IOH = –24mA VIN = VIL or VIH, IOH = –24mA(1) 0.002 0.001 0.001 VIN = VIL or VIH, IOL = 12mA VIN = VIL or VIH, IOL = 24mA VIN = VIL or VIH, IOL = 24mA(1) VI = VCC, GND VI (OE) = VIL, VIH; VI = VCC, GND; VO = VCC, GND VOLD = 1.65V Max. VOHD = 3.85V Min. VIN = VCC or GND IOUT = 50µA VOL Maximum LOW Level Output Voltage 3.0 4.5 5.5 3.0 4.5 5.5 0.1 0.1 0.1 0.36 0.36 0.36 ±0.1 ±0.25 IIN(2) IOZ Maximum Input Leakage Current Maximum 3-STATE Leakage Current Minimum Dynamic Output Current(3) Maximum Quiescent Supply Current 5.5 5.5 IOLD IOHD ICC (2) 5.5 5.5 5.5 75 −75 4.0 40.0 mA mA µA Notes: 1. All outputs loaded; thresholds on input associated with output under test. 2. IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. 3. Maximum test duration 2.0ms, one output loaded at a time. ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 5 74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs DC Electrical Characteristics for ACT TA = +25°C Symbol VIH VIL VOH TA = −40°C to +85°C Units V V V 2.0 2.0 0.8 0.8 4.4 5.4 3.76 4.76 0.1 0.1 0.44 0.44 ±1.0 ±2.5 1.5 75 −75 µA µA mA mA mA µA V Parameter Minimum HIGH Level Input Voltage Maximum LOW Level Input Voltage Minimum HIGH Level Output Voltage VCC (V) 4.5 5.5 4.5 5.5 4.5 5.5 4.5 5.5 Conditions VOUT = 0.1V or VCC − 0.1V VOUT = 0.1V or VCC − 0.1V IOUT = −50µA VIN = VIL or VIH, IOH = −24mA VIN = VIL or VIH, IOH = −24mA(4) IOUT = 50µA VIN = VIL or VIH, IOL = 24mA VIN = VIL or VIH, IOL = 24mA(4) VI = VCC, GND VI = VIL, VIH; VO = VCC, GND VI = VCC − 2.1V VOLD = 1.65V Max. VOHD = 3.85V Min. VIN = VCC or GND Typ. 1.5 1.5 1.5 1.5 4.49 5.49 2.0 2.0 0.8 0.8 4.4 5.4 Guaranteed Limits 3.86 4.86 0.001 0.001 0.1 0.1 0.36 0.36 ±0.1 ±0.25 0.6 VOL Maximum LOW Level Output Voltage 4.5 5.5 4.5 5.5 IIN IOZ ICCT IOLD IOHD ICC Maximum Input Leakage Current Maximum 3-STATE Leakage Current Maximum ICC/Input Minimum Dynamic Output Current(5) Maximum Quiescent Supply Current 5.5 5.5 5.5 5.5 5.5 5.5 4.0 40.0 Notes: 4. All outputs loaded; thresholds on input associated with output under test. 5. Maximum test duration 2.0ms, one output loaded at a time. ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 6 74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs AC Electrical Characteristics for AC TA = +25°C, CL = 50pF Symbol fMAX tPLH tPHL tPZH tPZL tPHZ tPLZ TA = −40°C to +85°, CL = 50pF Min. 60 100 13.5 9.5 12.5 9.0 11.5 8.5 11.5 8.5 12.5 11.0 11.5 8.5 1.5 1.5 2.0 1.5 1.5 1.0 1.5 1.0 2.0 2.0 1.0 1.0 15.5 10.5 14.0 10.0 13.0 9.5 13.0 9.5 14.5 12.5 12.5 10.0 ns ns ns ns ns ns Parameter Maximum Clock Frequency Propagation Delay, CP to On Propagation Delay, CP to On Output Enable Time Output Enable Time Output Disable Time Output Disable Time VCC (V)(6) 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 Min. 60 100 3.0 2.5 2.5 2.0 3.0 2.0 2.5 2.0 3.0 2.0 2.0 1.5 Typ. 110 155 11.0 8.0 10.0 7.0 9.5 7.0 9.0 6.5 10.5 8.0 8.0 6.5 Max. Max. Units MHz Note: 6. Voltage range 3.3 is 3.3V ± 0.3V. Voltage range 5.0 is 5.0V ± 0.5V. AC Operating Requirements for AC TA = +25°C, CL = 50pF Symbol tS tH tW TA = −40°C to +85°C, CL = 50pF Units ns ns ns 6.0 4.5 1.0 1.5 6.0 4.5 Parameter Setup Time, HIGH or LOW, Dn to CP Hold Time, HIGH or LOW, Dn to CP CP Pulse Width, HIGH or LOW VCC (V)(7) 3.3 5.0 3.3 5.0 3.3 5.0 Typ. 2.0 1.0 −1.0 0 4.0 2.5 Guaranteed Minimum 5.5 4.0 1.0 1.5 5.5 4.0 Note: 7. Voltage range 3.3 is 3.3V ± 0.3V. Voltage range 5.0 is 5.0V ± 0.5V. ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 7 74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs AC Electrical Characteristics for ACT TA = +25°C, CL = 50pF Symbol fMAX tPLH tPHL tPZH tPZL tPHZ tPLZ TA = −40°C to +85°C, CL = 50pF Min. 90 Parameter Maximum Clock Frequency Propagation Delay, CP to On Propagation Delay, CP to On Output Enable Time Output Enable Time Output Disable Time Output Disable Time VCC (V)(8) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Min. 100 2.0 2.0 2.0 1.5 1.5 1.5 Typ. 160 8.5 8.0 8.0 8.0 8.5 7.0 Max. Max. Units MHz 10.0 9.5 9.5 9.0 11.5 8.5 2.0 1.5 1.5 1.5 1.0 1.0 11.5 11.0 10.5 10.5 12.5 10.0 ns ns ns ns ns ns Note: 8. Voltage range 5.0 is 5.0V ± 0.5V. AC Operating Requirements for ACT TA = +25°C, CL = 50pF Symbol tS tH tW TA = −40°C to +85°C, CL = 50pF Units ns ns ns 5.5 1.5 5.0 Parameter Setup Time, HIGH or LOW, Dn to CP Hold Time, HIGH or LOW, Dn to CP CP Pulse Width, HIGH or LOW VCC (V)(9) 5.0 5.0 5.0 Typ. 1.0 0 2.5 Guaranteed Minimum 5.5 1.5 5.0 Note: 9. Voltage range 5.0 is 5.0V ± 0.5V. Capacitance Symbol CIN Parameter Input Capacitance Conditions VCC = OPEN Typ. 4.5 Units pF ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 8 74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs Physical Dimensions 13.00 12.60 11.43 20 B 11 A 9.50 10.65 7.60 10.00 7.40 2.25 1 PIN ONE INDICATOR 0.51 0.35 0.25 M 10 1.27 CBA 1.27 0.65 LAND PATTERN RECOMMENDATION 2.65 MAX SEE DETAIL A C 0.33 0.20 0.10 C SEATING PLANE 0.75 0.25 (R0.10) (R0.10) 8° 0° X 45° 0.30 0.10 NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE 0.25 1.27 0.40 (1.40) A) THIS PACKAGE CONFORMS TO JEDEC MS-013, VARIATION AC, ISSUE E B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE MOLD FLASH OR BURRS. D) CONFORMS TO ASME Y14.5M-1994 E) LANDPATTERN STANDARD: SOIC127P1030X265-20L F) DRAWING FILENAME: MKT-M20BREV3 SEATING PLANE DETAIL A SCALE: 2:1 Figure 1. 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 9 74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs Physical Dimensions (Continued) Figure 2. 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 10 74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs Physical Dimensions (Continued) Figure 3. 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 11 74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs Physical Dimensions (Continued) 26.92 24.89 PIN #1 7.11 6.09 (0.97) 1.78 1.14 7° TYP 3.43 3.17 5.33 MAX 7° TYP 7.87 2.54 0.36 0.56 .001[.025] C 3.55 3.17 0.38 MIN 7.62 10.92 MAX 0.20 0.35 NOTES: Figure 4. 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 12 74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs Physical Dimensions (Continued) Figure 5. 20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 13 74AC374, 74ACT374 — Octal D-Type Flip-Flop with 3-STATE Outputs TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. PDP-SPM™ SyncFET™ ® Power220® ® Power247 The Power Franchise® POWEREDGE® Power-SPM™ PowerTrench® TinyBoost™ Programmable Active Droop™ TinyBuck™ ® QFET TinyLogic® QS™ TINYOPTO™ QT Optoelectronics™ TinyPower™ ® Quiet Series™ TinyPWM™ RapidConfigure™ TinyWire™ Fairchild® SMART START™ Fairchild Semiconductor® µSerDes™ ® SPM FACT Quiet Series™ UHC® STEALTH™ FACT® Ultra FRFET™ SuperFET™ FAST® UniFET™ SuperSOT™-3 FastvCore™ VCX™ ® ®* SuperSOT™-6 FlashWriter SuperSOT™-8 * EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I32 ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® EZSWITCH™ * ™ FPS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production ©1988 Fairchild Semiconductor Corporation 74AC374, 74ACT374 Rev. 1.5.0 www.fairchildsemi.com 14