74LCXH245

74LCXH245 Low Voltage Bidirectional Transceiver with Bushold October 2000 Revised September 2001 74LCXH245 Low Voltage Bidirectional Transceiver with Bushold General Description The LCXH245 contains eight non-inverting bidirectional buffers with 3-STATE outputs and is intended for bus oriented applications. The device is designed for low voltage (2.5V and 3.3V) VCC applications. The T/R input determines the direction of data flow through the device. The OE input disables both the A and B ports by placing them in a high impedance state. The LCXH245 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation. The LCXH16244 data inputs include active bushold circuitry, eliminating the need for external pull-up resistors to hold unused or floating data inputs at a valid logic level. Features s 5V tolerant control inputs s 2.3V–3.6V VCC specifications provided s 7.0 ns tPD max (VCC = 3.3V), 10 µA ICC max s Power down high impedance outputs s ±24 mA output drive (VCC = 3.0V) s Implements patented noise/EMI reduction circuitry s Latch-up performance exceeds 500 mA s Bushold on inputs eliminates the need for external pull-up/pull-down resistors s ESD performance: Human body model > 2000V Machine model > 200V Ordering Code: Order Number 74LCXH245WM 74LCXH245SJ 74LCXH245MSA 74LCXH245MTC Package Number M20B M20D MSA20 MTC20 Package Description 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Shrink Small Outline Package (SSOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Connection Diagram Pin Descriptions Pin Names OE T/R A0–A7 B0–B7 Description Output Enable Input Transmit/Receive Input Side A Inputs or 3-STATE Outputs (Bushold) Side B Inputs or 3-STATE Outputs (Bushold) GTO is a trademark of Fairchild Semiconductor Corporation. © 2001 Fairchild Semiconductor Corporation DS500363 www.fairchildsemi.com 74LCXH245 Truth Table Inputs Outputs OE L L H H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Z = High Impedance Note 1: Unused bus terminals during HIGH Z State must be held HIGH or LOW. T/R L H X Bus B0 – B7 Data to Bus A0 – A7 Bus A0 – A7 Data to Bus B0 – B7 HIGH Z State on A0 – A7, B0 – B7 (Note 1) Logic Diagram www.fairchildsemi.com 2 74LCXH245 Absolute Maximum Ratings(Note 2) Symbol VCC VI VO IIK IOK IO ICC IGND TSTG Parameter Supply Voltage T/R, OE I/O Ports DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Source/Sink Current DC Supply Current per Supply Pin DC Ground Current per Ground Pin Storage Temperature Value Conditions Units V V Output in 3-STATE Output in HIGH or LOW State (Note 3) VI < GND VO < GND VO > VCC −0.5 to +7.0 0.5 to +7.0 −0.5 to VCC + 0.5 −0.5 to +7.0 −0.5 to VCC + 0.5 −50 −50 +50 ±50 ±100 ±100 −65 to +150 V mA mA mA mA mA °C Recommended Operating Conditions (Note 4) Symbol VCC VI VO IOH/IOL Supply Voltage Input Voltage Output Voltage Output Current HIGH or LOW State 3-STATE VCC = 3.0V − 3.6V VCC = 2.7V - 3.0V VCC = 2.3V - 2.7V TA Free-Air Operating Temperature Input Edge Rate, VIN = 0.8V − 2.0V, VCC = 3.0V Parameter Operating Data Retention Min 2.0 1.5 0 0 0 Max 3.6 3.6 VCC VCC 5.5 Units V V V ±24 ±12 ±8 −40 0 85 10 mA °C ns/V ∆t/∆V Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 3: IO Absolute Maximum Rating must be observed. Note 4: Floating or unused control inputs must be HIGH or LOW. DC Electrical Characteristics Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage IOH = −100 µA IOH = −8 mA IOH = −12 mA IOH = −18 mA IOH = −24 mA VOL LOW Level Output Voltage IOL = 100 µA IOL = 8mA IOL = 12 mA IOL = 16 mA IOL = 24 mA II Input Leakage Current VI = VCC or GND Conditions VCC (V) 2.3 − 2.7 2.7 − 3.6 2.3 − 2.7 2.7 - 3.6 2.3 - 3.6 2.3 2.7 3.0 3.0 2.3 − 3.6 2.3 2.7 3.0 3.0 2.3 − 3.6 VCC − 0.2 1.8 2.2 2.4 2.2 0.2 0.6 0.4 0.4 0.55 ±5.0 µA V V TA = −40°C to +85°C Min 1.7 2.0 0.7 0.8 Max Units V V 3 www.fairchildsemi.com 74LCXH245 DC Electrical Characteristics Symbol II(HOLD) Parameter Bushold Input Minimum Drive Hold Current (Continued) VCC (V) TA = −40°C to +85°C Min 45 −45 75 −75 300 −300 450 −450 ±5.0 10 ±10 500 µA µA µA µA µA Max Conditions VIN = 0.7V VIN = 1.7V VIN = 0.8V VIN = 2.0V Units 2.3 3.0 2.7 3.6 2.3 − 3.6 2.3 − 3.6 2.3 − 3.6 2.3 - 3.6 II(OD) Bushold Input Over-Drive Current to Change State (Note 6) (Note 7) (Note 6) (Note 7) IOZ ICC ∆ICC 3-STATE I/O Leakage Quiescent Supply Current Increase in ICC per Input VO = VCC or GND VI = VCC or GND 3.6V ≤ VI, VO ≤ 5.5V (Note 5) VIH = V CC −0.6V Note 5: Outputs disabled or 3-STATE only. Note 6: An external driver must source at least the specified current to switch from LOW-to-HIGH. Note 7: An external driver must sink at least the specified current to switch from HIGH-to-LOW. AC Electrical Characteristics TA = −40°C to +85°C, RL = 500Ω Symbol Parameter VCC = 3.3V ± 0.3V CL = 50 pF Min tPHL tPLH tPZL tPZH tPLZ tPHZ tOSHL tOSLH Output to Output Skew (Note 8) Output Disable Time Propagation Delay An to Bn or Bn to An Output Enable Time 1.5 1.5 1.5 1.5 1.5 1.5 Max 7.0 7.0 8.5 8.5 7.5 7.5 1.0 1.0 Min 1.5 1.5 1.5 1.5 1.5 1.5 VCC = 2.7V CL = 50 pF Max 8.0 8.0 9.5 9.5 8.5 8.5 Min 1.5 1.5 1.5 1.5 1.5 1.5 8.4 8.4 10.5 10.5 9.0 9.0 VCC = 2.5V ± 0.2V CL = 30 pF Max ns ns ns ns Units Note 8: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Dynamic Switching Characteristics Symbol VOLP VOLV Parameter Quiet Output Dynamic Peak VOL Quiet Output Dynamic Valley VOL Conditions CL = 50 pF, VIH = 3.3V, VIL = 0V CL = 30 pF, VIH = 2.5V, VIL = 0V CL = 50 pF, VIH = 3.3V, V IL = 0V CL = 30 pF, VIH = 2.5V, VIL = 0V VCC (V) 3.3 2.5 3.3 2.5 TA = 25°C Typical 0.8 0.6 −0.8 −0.6 Units V V Capacitance Symbol CIN CI/O CPD Parameter Input Capacitance Input/Output Capacitance Power Dissipation Capacitance Conditions VCC = Open, VI = 0V or VCC VCC = 3.3V, VI = 0V or VCC VCC = 3.3V, VI = 0V or VCC, f = 10 MHz Typical 7 8 25 Units pF pF pF www.fairchildsemi.com 4 74LCXH245 AC LOADING and WAVEFORMS Generic for LCX Family FIGURE 1. AC Test Circuit (CL includes probe and jig capacitance) Test tPLH, tPHL tPZL, tPLZ tPZH, tPHZ Switch Open 6V at VCC = 3.3 ± 0.3V; and 2.7V VCC x 2 at VCC = 2.5 ± 0.2V GND Waveform for Inverting and Non-Inverting Functions 3-STATE Output High Enable and Disable Times for Logic Propagation Delay. Pulse Width and trec Waveforms Setup Time, Hold Time and Recovery Time for Logic 3-STATE Output Low Enable and Disable Times for Logic FIGURE 2. Waveforms (Input Characteristics; f =1MHz, tr = tf = 3ns) Symbol Vmi Vmo Vx Vy VCC 3.3V ± 0.3V 1.5V 1.5V VOL + 0.3V VOH − 0.3V 1.5V 1.5V VOL + 0.3V VOH − 0.3V 2.7V trise and tfall 2.5V ± 0.2V VCC/2 VCC/2 VOL + 0.15V VOH − 0.15V 5 www.fairchildsemi.com 74LCXH245 Schematic Diagram Generic for LCXH Family (with Bushold) www.fairchildsemi.com 6 74LCXH245 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M20B 7 www.fairchildsemi.com 74LCXH245 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D www.fairchildsemi.com 8 74LCXH245 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Shrink Small Outline Package (SSOP), EIAJ TYPE II, 5.3mm Wide Package Number MSA20 9 www.fairchildsemi.com 74LCXH245 Low Voltage Bidirectional Transceiver with Bushold Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC20 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 10 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com