74VCX162373 Low Voltage 16-Bit Transparent Latch
January 2000 Revised June 2005
74VCX162373 Low Voltage 16-Bit Transparent Latch with 3.6V Tolerant Inputs and Outputs and 26: Series Resistors in Outputs
General Description
The VCX162373 contains sixteen non-inverting latches with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. The flip-flops appear to be transparent to the data when the Latch enable (LE) is HIGH. When LE is LOW, the data that meets the setup time is latched. Data appears on the bus when the Output Enable (OE) is LOW. When OE is HIGH, the outputs are in a high impedance state. The VCX162373 is also designed with 26: resistors in the outputs. This design reduces line noise in applications such as memory address drivers, clock drivers and bus transceivers/transmitters. The 74VCX162373 is designed for low voltage (1.4V to 3.6V) VCC applications with I/O compatibility up to 3.6V. The 74VCX162373 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining low CMOS power dissipation.
Features
s 1.4V–3.6V VCC supply operation s 3.6V tolerant inputs and outputs s 26: series resistors in outputs s tPD (In to On)
3.3 ns max for 3.0V to 3.6V VCC
s Power-off high impedance inputs and outputs s Support live insertion and withdrawal (Note 1) s Static Drive (IOH/IOL)
r12 mA @ 3.0V VCC
s Uses patented noise/EMI reduction circuitry s Latch-up performance exceeds 300 mA s ESD performance:
Human body model ! 2000V Machine model ! 200V
Note 1: To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
Ordering Code:
Ordering Number 74VCX162373MTD Package Number MTD48 Package Description 48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Logic Symbol
Pin Descriptions
Pin Names OEn LEn I0–I15 O0–O15 Description Output Enable Input (Active LOW) Latch Enable Input Inputs Outputs
© 2005 Fairchild Semiconductor Corporation
DS500236
www.fairchildsemi.com
74VCX162373
Connection Diagram
Truth Tables
Inputs LE1 X H H L OE1 H L L L Inputs LE2 X H H L
H L X Z O0
Outputs I0–I7 X L H X O0–O7 Z L H O0 Outputs I8–I15 X L H X O8–O15 Z L H O0
OE2 H L L L
HIGH Voltage Level LOW Voltage Level Immaterial (HIGH or LOW, inputs may not float) High Impedance Previous O0 before HIGH-to-LOW of Latch Enable
Functional Description
The 74VCX162373 contains sixteen edge D-type latches with 3-STATE outputs. The device is byte controlled with each byte functioning identically, but independent of the other. Control pins can be shorted together to obtain full 16-bit operation. The following description applies to each byte. When the Latch Enable (LEn) input is HIGH, data on the In enters the latches. In this condition the latches are transparent, i.e., a latch output will change state each time its I input changes. When LEn is LOW, the latches store information that was present on the I inputs a setup time preceding the HIGH-to-LOW transition on LEn. The 3-STATE outputs are controlled by the Output Enable (OEn) input. When OEn is LOW the standard outputs are in the 2-state mode. When OEn is HIGH, the standard outputs are in the high impedance mode but this does not interfere with entering new data into the latches.
Logic Diagram
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
www.fairchildsemi.com
2
74VCX162373
Absolute Maximum Ratings(Note 2)
Supply Voltage (VCC) DC Input Voltage (VI) Output Voltage (VO) Outputs 3-STATED Outputs Active (Note 3) DC Input Diode Current (IIK) VI 0V DC Output Diode Current (IOK) VO 0 V VO ! VCC DC Output Source/Sink Current (IOH/IOL) DC VCC or GND Current per Supply Pin (ICC or GND) Storage Temperature Range (TSTG)
0.5V to 4.6V 0.5V to 4.6V 0.5V to 4.6V 0.5V to VCC 0.5V 50 mA 50 mA 50 mA r50 mA r100 mA 65qC to 150qC
Recommended Operating Conditions (Note 4)
Power Supply Operating Input Voltage Output Voltage (VO) Output in Active States Output in “OFF” State Output Current in IOH/IOL VCC VCC VCC VCC 3.0V to 3.6V 2.3V to 2.7V 1.65V to 2.3V 1.4V to 1.6V 0V to VCC 0.0V to 3.6V 1.4V to 3.6V
0.3V to 3.6V
Free Air Operating Temperature (TA) Minimum Input Edge Rate ('t/'V) VIN 0.8V to 2.0V, VCC 3.0V
r12 mA r8 mA r3 mA r1 mA 40qC to 85qC
10 ns/V
Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 3: IO Absolute Maximum Rating must be observed. Note 4: Floating or unused inputs must be held HIGH or LOW.
DC Electrical Characteristics
Symbol VIH Parameter HIGH Level Input Voltage Conditions VCC (V) 2.7 - 3.6 2.3 - 2.7 1.65 - 2.3 1.4 - 1.6 VIL LOW Level Input Voltage 2.7 - 3.6 2.3 - 2.7 1.65 - 2.3 1.4 - 1.6 VOH HIGH Level Output Voltage IOH IOH IOH IOH IOH IOH IOH IOH IOH IOH IOH IOH Min 2.0 1.6 0.65 x VCC 0.65 x VCC 0.8 0.7 0.35 x VCC 0.35 x VCC VCC - 0.2 2.2 2.4 2.2 VCC - 0.2 2.0 1.8 1.7 VCC - 0.2 1.25 VCC - 0.2 1.05 V V V Max Units
100 PA 6 mA 8 mA 12 mA 100 PA 4 mA 6 mA 8 mA 100 PA 3 mA 100 PA 1 mA
2.7 - 3.6 2.7 3.0 3.0 2.3 - 2.7 2.3 2.3 2.3 1.65 - 2.3 1.65 1.4 - 1.6 1.4
3
www.fairchildsemi.com
74VCX162373
DC Electrical Characteristics
Symbol VOL Parameter LOW Level Output Voltage IOL IOL IOL IOL IOL IOL IOL IOL IOL IOL IOL II IOZ IOFF ICC Input Leakage Current 3-STATE Output Leakage Power-OFF Leakage Current Quiescent Supply Current Increase in ICC per Input
(Continued)
VCC (V) 100 PA 6 mA 8 mA 12 mA 100 PA 6 mA 8 mA 100 PA 3 mA 100 PA 1 mA VIH or VIL 2.7 - 3.6 2.7 3.0 3.0 2.3 - 2.7 2.3 2.3 1.65 - 2.3 1.65 1.4 - 1.6 1.4 1.4 - 3.6 1.4 - 3.6 0 1.4 - 3.6 1.4 - 3.6 2.7 - 3.6 0.2 0.4 0.55 0.8 0.2 0.4 0.6 0.2 0.3 0.2 0.35 V
Conditions
Min
Max
Units
0 d VI d 3.6V 0 d VO d 3.6V, VI 0 d (VI, VO) d 3.6V VI VIH VCC or GND VCC 0.6V VCC d (VI, VO) d 3.6V (Note 5)
r5.0 r10.0
10.0 20.0
PA PA PA PA PA PA
r20.0
750
'ICC
Note 5: Outputs disabled or 3-STATE only.
AC Electrical Characteristics (Note 6)
Symbol tPHL tPLH Parameter Propagation Delay LE to On CL tPHL tPLH Propagation Delay In t o O n CL tPZL tPZH CL tPLZ tPHZ CL tS Setup Time CL 15 pF, RL 30 pF, RL 2 k: 500: Output Disable Time CL 15 pF, RL 30 pF, RL 2 k: 500: Output Enable Time CL 15 pF, RL 30 pF, RL 2 k: 500: CL 15 pF, RL 30 pF, RL 2 k: 500: CL Conditions 30 pF, RL 500: VCC (V) 3.3 r 0.3 2.5 r 0.2 1.8 r 0.15 1.5 r 0.1 3.3 r 0.3 2.5 r 0.2 1.8 r 0.15 1.5 r 0.1 3.3 r 0.3 2.5 r 0.2 1.8 r 0.15 1.5 r 0.1 3.3 r 0.3 2.5 r 0.2 1.8 r 0.15 1.5 r 0.1 3.3 r 0.3 2.5 r 0.2 1.8 r 0.15 CL tH Hold Time CL 15 pF, RL 30 pF, RL 2 k: 500: 1.5 r 0.1 3.3 r 0.3 2.5 r 0.2 1.8 r 0.15 CL 15 pF, RL 2 k: 1.5 r 0.1 TA
40qC to 85qC
Max 3.6 4.9 9.8 19.6 3.3 4.5 9.0 18.0 3.9 5.4 9.8 19.6 4.0 4.4 7.9 15.8
Min 0.8 1.0 1.5 1.0 0.8 1.0 1.5 1.0 0.8 1.0 1.5 1.0 0.8 1.0 1.5 1.0 1.5 1.5 2.5 3.0 1.0 1.0 1.0 2.0
Units
Figure Number Figures 1, 2 Figures 7, 8 Figures 1, 2 Figures 7, 8 Figures 1, 3, 4 Figures 7, 9, 10 Figures 1, 3, 4 Figures 7, 9, 10 Figures 1, 6 Figures 6, 7 Figures 1, 6 Figures 6, 7
ns
ns
ns
ns
ns
ns
www.fairchildsemi.com
4
74VCX162373
AC Electrical Characteristics
Symbol tW Parameter Pulse Width CL
(Continued)
VCC (V) 3.3 r 0.3 2.5 r 0.2 1.8 r 0.15 TA
Conditions 30 pF, RL 500:
40qC to 85qC
Max
Units
Figure Number Figures 1, 5 Figures 5, 7
Min 1.5 1.5 4.0 4.0
ns
CL tOSHL tOSLH Output to Output Skew (Note 7) CL
Note 6: For CL
15 pF, RL 30 pF, RL
2 k: 500:
1.5 r 0.1 3.3 r 0.3 2.5 r 0.2 1.8 r 0.15
CL
0.5 0.5 0.75 1.5 ns
15 pF, RL
2 k:
1.5 r 0.1
50PF, add approximately 300 ps to the AC maximum specification.
Note 7: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH).
Dynamic Switching Characteristics
Symbol VOLP Parameter Quiet Output Dynamic Peak VOL CL 30 pF, VIH Conditions VCC, VIL 0V VCC (V) 1.8 2.5 3.3 VOLV Quiet Output Dynamic Valley VOL CL 30 pF, VIH VCC, VIL 0V 1.8 2.5 3.3 VOHV Quiet Output Dynamic Valley VOH CL 30 pF, VIH VCC, VIL 0V 1.8 2.5 3.3 TA 25qC Typical 0.15 0.25 0.35 V Units
0.15 0.25 0.35
1.55 2.05 2.65 V V
Capacitance
Symbol CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance Parameter VCC VI VI VCC Conditions 1.8V, 2.5V or 3.3V, VI 0V or VCC, VCC 0V or VCC, f 10 MHz, 0V or VCC TA 25qC Typical 6 7 20 Units pF pF pF
1.8V, 2.5V or 3.3V
1.8V, 2.5V or 3.3V
5
www.fairchildsemi.com
74VCX162373
AC Loading and Waveforms (VCC 3.3V r 0.3V to 1.8V r 0.15V)
TEST tPLH, tPHL tPZL, tPLZ tPZH, tPHZ VCC x 2 at VCC
SWITCH Open 6V at VCC 3.3 r 0.3V; 2.5 r 0.2V; 1.8V r 0.15V GND FIGURE 1. AC Test Circuit
FIGURE 2. Waveform for Inverting and Non-Inverting Functions
FIGURE 3. 3-STATE Output HIGH Enable and Disable Times for Low Voltage Logic
FIGURE 4. 3-STATE Output LOW Enable and Disable Times for Low Voltage Logic
FIGURE 5. Propagation Delay, Pulse Width and tREC Waveforms Symbol Vmi Vmo VX VY
FIGURE 6. Setup Time, Hold Time and Recovery Time for Low Voltage Logic VCC
3.3V r 0.3V 1.5V 1.5V VOL 0.3V VOH 0.3V
2.5V r 0.2V VCC/2 VCC/2 VOL 0.15V VOH 0.15V
1.8V r 0.15V VCC/2 VCC/2 VOL 0.15V VOH 0.15V
www.fairchildsemi.com
6
74VCX162373
AC Loading and Waveforms (VCC 1.5V r 0.1V)
TEST tPLH, tPHL tPZL, tPLZ tPZH, tPHZ
SWITCH Open VCC x 2 at VCC GND FIGURE 7. AC Test Circuit 1.5V r 0.1V
FIGURE 8. Waveform for Inverting and Non-Inverting Functions
FIGURE 9. 3-STATE Output HIGH Enable and Disable Times for Low Voltage Logic
FIGURE 10. 3-STATE Output LOW Enable and Disable Times for Low Voltage Logic Symbol Vmi Vmo VX VY VCC 1.5V r 0.1V VCC/2 VCC/2 VOL 0.1V VOH 0.1V
7
www.fairchildsemi.com
74VCX162373 Low Voltage 16-Bit Transparent Latch
Physical Dimensions inches (millimeters) unless otherwise noted
48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Package Number MTD48
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 8 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com