FSAU3157

NC7SBU3157 • FSAU3157 Low Voltage SPDT Analog Switch with 2V Undershoot Protection April 2002 Revised December 2005 NC7SBU3157 • FSAU3157 Low Voltage SPDT Analog Switch with 2V Undershoot Protection General Description The NC7SBU3157 or FSAU3157 is a high performance, singlepole/double-throw (SPDT) Analog Switch or 2:1 Multiplexer/ Demultiplexer Bus Switch. The device is fabricated with advanced sub-micron CMOS technology to achieve high speed enable and disable times and low On Resistance. The break before make select circuitry prevents disruption of signals on the B Port due to both switches temporarily being enabled during select pin switching. The device is specified to operate over the 1.65 to 5.5V VCC operating range. The control input tolerates voltages up to 5.5V independent of the VCC operating range. Fairchild’s integrated Undershoot Hardened Circuit (UHC¥ ) senses undershoot at the I/Os, and responds by preventing voltage differentials from developing and turning the switch on. Features O Useful in both analog and digital applications O Space saving SC70 6-lead surface mount package O Low On Resistance:  10: on typ @ 3.3V VCC O Broad VCC operating range: 1.65V to 5.5V O Rail-to-Rail signal handling O Power down high impedance control input O Overvoltage tolerance of control input to 7.0V O Break before make enable circuitry O 250 MHz - 3dB bandwidth O Available in Lead (Pb) Free packaging Ordering Code: Order Number NC7SBU3157P6X NC7SBU3157P6X_NL FSAU3157P6X Package Number MAA06A MAA06A MAA06A Product Code Top Mark U7A U7A U7A Package Description 6-Lead SC70, EIAJ SC88, 1.25mm Wide 6-Lead SC70, EIAJ SC88, 1.25mm Wide Supplied As 3k Units on Tape and Reel 3k Units on Tape and Reel Pb-Free 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel Pb-Free package per JEDEC J-STD-020B. © 2005 Fairchild Semiconductor Corporation DS500618 www.fairchildsemi.com NC7SBU3157 • FSAU3157 Logic Symbol Connection Diagrams Analog Symbol (Top View) Pin One Orientation Diagram AAA Product Code Top Mark - see ordering code. Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram). Function Table Input (S) L H H HIGH Logic Level L LOW Logic Level Pin Descriptions Function B0 Connected to A B1 Connected to A Pin Names A, B0, B1 S Description Data Ports Control Input www.fairchildsemi.com 2 NC7SBU3157 • FSAU3157 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Switch Voltage (VS) (Note 2) DC Input Voltage (VIN) (Note 2) DC Input Diode Current (IIK) @ (IIK) VIN  0V DC Output Current (IOUT) DC VCC or Ground Current (ICC/IGND) Storage Temperature Range (TSTG) Junction Temperature under Bias (TJ) Junction Lead Temperature (TL) Power Dissipation (PD) @ 85qC (Soldering, 10 seconds) 0.5V to 7.0V 0.5V to VCC 0.5V 0.5V to 7.0V 50 mA r100 mA 65qC to 150qC 150qC 260qC 180 mW 128 mA Recommended Operating Conditions (Note 3) Supply Voltage Operating (VCC) Control Input Voltage (VIN) Switch Input Voltage (VIN) Output Voltage (VOUT) Operating Temperature (TA) Input Rise and Fall Time (tr, tf) Control Input VCC Control Input VCC 2.3V - 3.6V 4.5V - 5.5V 0 ns/V to 10 ns/V 0 ns/V to 5 ns/V 350qC/W 1.65V to 5.5V 0V to VCC 0V to VCC 0V to VCC 40qC to 85qC Thermal Resistance (TJA) Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. Note 2: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Note 3: Control input must be held HIGH or LOW, it must not float. DC Electrical Characteristics Symbol VIH VIL IIN IOZ RON Parameter HIGH Level Input Voltage LOW Level Input Voltage Input Leakage Current OFF State Leakage Current Switch On Resistance (Note 4) 4.5 VCC (V) 1.65  1.95 2.3  5.5 1.65  1.95 2.3  5.5 0  5.5 1.65  5.5 Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC TA 25qC Typ Max TA 40qC to 85qC Max Units Conditions Min 0.75 VCC 0.7 VCC V 0.25 VCC 0.3 VCC V r0.05 r0.05 3.0 5.0 7.0 4.0 10.0 5.0 13.0 6.5 17.0 r0.1 r0.1 15.0 15.0 15.0 20.0 20.0 30.0 30.0 50.0 50.0 1.0 r1 r1 15.0 15.0 15.0 20.0 20.0 30.0 30.0 50.0 50.0 10.0 0 VCC 25.0 50.0 100 300 PA PA : : : : : : : : : PA V 0 d VIN d 5.5V 0 d A, B d VCC VIN VIN VIN VIN VIN VIN VIN VIN VIN VIN IOUT IA 0V, IO 2.4V, IO 4.5V, IO 0V, IO 3V, IO 0V, IO 2.3V, IO 0V, IO 1.65V, IO 0 30 mA 30 mA 30 mA 24 mA 3.0 2.3 1.65 ICC Quiescent Supply Current All Channels ON or OFF Analog Signal Range RRANGE On Resistance Over Signal Range (Note 4)(Note 8) 5.5 VCC 4.5 3.0 2.3 1.65 4.5 3.0 2.3 1.65 VIKU Rflat Voltage Undershoot On Resistance Flatness (Note 4)(Note 5)(Note 7) 5.5 5.0 3.3 2.5 1.8 0 24 mA 8 mA 8 mA 4 mA 4 mA VCC or GND VCC 30 mA, 0 d VBn d VCC 24 mA, 0 d VBn d VCC 8 mA, 0 d VBn d VCC 4 mA, 0 d VBn d VCC 30 mA, VBn 8 mA, VBn 4 mA, VBn 3.15 1.6 1.15 : IA IA IA IA IA IA IA 'RON On Resistance Match Between Channels (Note 4)(Note 5)(Note 6) 0.15 0.2 0.5 0.5 : 24 mA, VBn 2.1 2.0 6.0 12.0 28.0 125 V 0.0 mA t IIN t 50 mA, OE 5.5V IA 30 mA, 0 d VBn d VCC 24 mA, 0 d VBn d VCC 8 mA, 0 d VBn d VCC 4 mA, 0 d VBn d VCC : IA IA IA Note 4: Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance is determined by the lower of the voltages on the two (A or B Ports). Note 5: Parameter is characterized but not tested in production. Note 6: 'RON RON max  RON min measured at identical VCC, temperature and voltage levels. 3 www.fairchildsemi.com NC7SBU3157 • FSAU3157 DC Electrical Characteristics Note 8: Guaranteed by Design. (Continued) Note 7: Flatness is defined as the difference between the maximum and minimum value of On Resistance over the specified range of conditions. AC Electrical Characteristics Symbol tPHL tPLH Parameter Propagation Delay Bus to Bus (Note 10) tPZL tPZH Output Enable Time Turn on Time (A to Bn) tPLZ tPHZ Output Disable Time Turn Off Time (A Port to B Port) tB-M VCC (V) 1.65  1.95 2.3  2.7 3.0  3.6 4.5  5.5 1.65  1.95 2.3  2.7 3.0  3.6 4.5  5.5 1.65  1.95 2.3  2.7 3.0  3.6 4.5  5.5 Break Before Make Time 1.65  1.95 (Note 9) 2.3  2.7 3.0  3.6 4.5  5.5 Q OIRR Xtalk BW THD Charge Injection (Note 9) Off Isolation (Note 11) Crosstalk 5.0 3.3 1.65  5.5 1.65  5.5 1.65  5.5 7.0 3.5 2.5 1.7 3.0 2.0 1.5 0.8 0.5 0.5 0.5 0.5 7.0 3.0 1.2 0.8 0.3 23.0 13.0 6.9 5.2 12.5 7.0 5.0 3.5 7.0 3.5 2.5 1.7 3.0 2.0 1.5 0.8 0.5 0.5 0.5 0.5 pC dB dB MHz CL RL f RL f RL RL 5 0.011 % f Note 9: Guaranteed by Design. Note 10: This parameter is guaranteed by design but not tested. The bus switch contributes no propagation delay other than the RC delay of the On Resistance of the switch and the 50 pF load capacitance, when driven by an ideal voltage source (zero output impedance). Note 11: Off Isolation 20 log10 [VA / VBn] 0.1 nF, VGEN 0: 50: 10MHz 50: 10MHz 50: 600 : 20 Hz to 20 KHz 0V RGEN Figure 5 Figure 6 Figure 7 Figure 10 ns Figure 4 1.2 0.8 0.3 24.0 14.0 7.6 5.7 13.0 7.5 5.3 3.8 ns VI VI 2 x VCC for tPLZ 0V for tPHZ Figures 2, 3 ns VI VI 2 x VCC for tPZL 0V for tPZH Figures 2, 3 ns VI OPEN Figures 2, 3 Min TA 25qC Typ Max TA 40qC to 85qC Max Units Conditions Figure Number Min 57.0 54.0 250 3dB Bandwidth Total Harmonic Distortion (Note 9) 0.5 VP-P www.fairchildsemi.com 4 NC7SBU3157 • FSAU3157 Capacitance Symbol CIN CIO-B CIOA-ON Note 12: TA (Note 12) Figure Number Figure 8 Figure 9 Parameter Control Pin Input Capacitance B Port Off Capacitance A Port Capacitance When Switch Is Enabled Typ 2.3 6.5 18.5 Max Units pF pF pF Conditions VCC VCC VCC 0V 5.0V 5.0V 25qC, f 1 MHz, Capacitance is characterized but not tested in production. Undershoot Characteristic (Note 13) Symbol VOUTU Parameter Output Voltage During Undershoot Min 2.5 Typ VOH - 0.3 Max Units V Conditions Figure 1 Note 13: This test is intended to characterize the device’s protective capabilities by maintaining output signal integrity during an input transient voltage undershoot event. FIGURE 1. Device Test Conditions Parameter VIN R1 R2 VTRI VCC Value see Waveform 100K 7.0 5.5 Units V Transient Input Voltage (VIN) Waveform : V V 5 www.fairchildsemi.com NC7SBU3157 • FSAU3157 AC Loading and Waveforms Note: Input driven by 50: source terminated in 50: Note: CL includes load and stray capacitance Note: Input PRR 1.0 MHz; tW 500 ns FIGURE 2. AC Test Circuit FIGURE 3. AC Waveforms FIGURE 4. Break Before Make Interval Timing www.fairchildsemi.com 6 NC7SBU3157 • FSAU3157 AC Loading and Waveforms (Continued) FIGURE 5. Charge Injection Test FIGURE 6. Off Isolation FIGURE 7. Crosstalk FIGURE 8. Channel Off Capacitance FIGURE 9. Channel On Capacitance FIGURE 10. Bandwidth 7 www.fairchildsemi.com NC7SBU3157 • FSAU3157 Tape and Reel Specification TAPE FORMAT Package Designator P6X Tape Section Leader (Start End) Carrier Trailer (Hub End) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed TAPE DIMENSIONS inches (millimeters) Package SC70-6 Tape Size 8 mm DIM A 0.093 (2.35) DIM B 0.096 (2.45) DIM F 0.138 r 0.004 (3.5 r 0.10) 0.053 r 0.004 (1.35 r 0.10) DIM Ko DIM P1 0.157 (4) DIM W 0.315 r 0.004 (8 r 0.1) www.fairchildsemi.com 8 NC7SBU3157 • FSAU3157 REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) 0.331  0.059/0.000 (8.40  1.50/0.00) W1 W2 0.567 (14.40) W1  0.078/0.039 (W1  2.00/1.00) W3 9 www.fairchildsemi.com NC7SBU3157 • FSAU3157 Physical Dimensions inches (millimeters) unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A www.fairchildsemi.com 10 NC7SBU3157 • FSAU3157 Low Voltage SPDT Analog Switch with 2V Undershoot Protection DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION As used herein: provided in the labeling, can be reasonably expected to result in significant injury to the user. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or 2. A critical component is any component of a life support (b) support or sustain life, or (c) whose failure to perform device or system whose failure to perform can be reasonwhen properly used in accordance with instructions for use ably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of terms Datasheet Identification Product Status Advance Information Preliminary Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. No Identification Needed Full Production Obsolete Not In Production 11 www.fairchildsemi.com