FSAV330QSCX

FAV330 — 4-Channel, 2:1 Video Switch March 2008 FSAV330 — 4-Channel, 2:1 Video Switch Features Replacement for the P15V330 W ide Bandwidth: 300MHz 4Ω Switch Connection between Two Ports Minimal Propagation Delay through the Switch Low lCC Zero Bounce in Flow-through Mode Control Inputs Compatible with TTL Level Description The FSAV330 video switch is a quad, single-pole / double-throw, high-speed CMOS TTL-compatible video switch. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When /OE is LOW, the select pin connects the A port to the selected B port output. When /OE is HIGH, the switch is OPEN and a high-impedance state exists between the two ports. Applications Set-top Boxes Flat Panel Displays CRT Displays DVD - RW Ordering Information Part Number FSAV330M FSAV330MX FSAV330MTC FSAV330MTCX FSAV330QSC FSAV330QSCX Operating Temperature Range -40 to +85°C -40 to +85°C -40 to +85°C -40 to +85°C -40 to +85°C -40 to +85°C Package 16-Lead, Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 inch Narrow 16-Lead, Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 inch Narrow 16-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 16-, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 inch Wide 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 inch Wide Packing Method Tube Tape and Reel Tube Tape and Reel Tube Tape and Reel All packages are lead free per JEDEC: J-STD-020B standard. The Fairchild switch family derives from and embodies Fairchild’s proven switch technology used for several years in its 74LVX3L384 (FST3384) bus switch product. © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com FSAV330 — 4-Channel, 2:1 Video Switch Pin Configurations S 1 16 VCC /OE 1B1 1B2 1A 2 15 3 14 4B1 4B2 4A 4 13 2B1 2B2 2A 5 12 6 11 3B1 3B2 3A 7 10 GND 8 9 Figure 1. Logic Diagram Figure 2. Pin Assignments Pin Descriptions Pin # 15 1 4,7,9,12 2,3,5,6,10,11,13,14 8 16 Pin Types /OE S A B1-B2 GND VCC Description Bus Switch Enabled Select Input Bus A Bus B Ground Supply Voltage Truth Table S Don’t Care LOW HIGH /OE HIGH LOW LOW Function Disconnected A=B1 A=B2 © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 2 FSAV330 — 4-Channel, 2:1 Video Switch Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VS VIN IIK IOUT ICC/IGND TSTG ESD Supply Voltage DC Switch Voltage DC Input Voltage (1) Parameter Min. -0.5 -0.5 -0.5 -50 Max. +7.0 +7.0 +7.0 128 ±100 Unit V V V mA mA mA °C V DC Input Diode Current DC Output Sink Current DC VCC / GND Current Storage Temperature Range Human Body Model, JESD22-A114 -65 +150 4000 Note: 1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol VCC VIN VOUT tr , tf TA Power Supply Input Voltage Output Voltage Parameter Min. 4.0 0 0 Max. 5.5 5.5 5.5 5 DC +85 Unit V V V ns/V °C Input Rise and Fall Time Switch Control Input Switch I/O 0 0 -40 Operating Temperature, Free Air Note: 2. Unused control inputs must be held HIGH or LOW; they may not float. © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 3 FSAV330 — 4-Channel, 2:1 Video Switch DC Electrical Characteristics Typical values are at VCC=5.0V and TA= +25°C. Minimum and maximum values are at TA= -40 to +85°C. Symbol VANALOG VIK VIH VIL II IOZ RON ICC ΔICC Parameter Analog Signal Range Clamp Diode Voltage High-Level Input Voltage Low-Level Input Voltage Input Leakage Current Off-state Leakage Current Switch On Resistance (3) Conditions IIN=-18mA VCC (V) 5 4.5 4.0 to 5.5 4.0 to 5.5 5.5 5.5 4.5 4.5 5.5 5.5 Min. 0 2.0 Typ. Max. 2 -1.2 0.8 ±1.0 ±1.0 7 10 3 2.5 Units V V V V µA µA Ω µA mA Quiescent Supply Current Increase in ICC per Input 0 ≤ VIN ≤ 5.5V 0 ≤ A, B ≤ VCC VIN=1.0V, RI=75Ω, ION=13mA VIN=2.0V, RI=75Ω, ION=26mA VIN=VCC or GND, IOUT=0 One Input at 3.4V Other Inputs at VCC or GND 3 7 Note: 3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltages on the A or B pins. AC Electrical Characteristics TA=-40 to +85°C, CL=50pF, RU=RD=500Ω. Symbol Parameter Output Enable Time, Select to Bus B Output Enable Time, /OE to Bus A, B Output Disable Time, Select to Bus B Output Disable Time, Output Enable Time /OE to Bus A, B -3dB Bandwidth Crosstalk Differential Gain Differential Phase Off Isolation (4) Conditions VCC=4.5 – 5.5V Min. Typ. Max. 5.2 VCC=4.0V Min. Max. 5.7 Units Figure tPZH, tPZL VI=7V for tPZL VI=Open for tPZH 5.1 5.6 ns Figure 3 Figure 4 5.2 VI=7V for tPLZ VI=Open for tPHZ 5.5 RL=150Ω, TA=25°C RIN=10Ω, RL=150Ω, f=10MHz RL=150Ω, f=3.58MHz RL=150Ω, f=3.58MHz RL=150Ω, f=10MHz 300 -58 0.64 0.1 -60 5.5 ns 5.5 MHz dB % ° dB Figure 3 Figure 4 tPHZ, tPLZ BW XTALK DG DP OIRR Note: 4. This parameter is guaranteed by device characterization, not production tested. Capacitance TA=+25°C, f=1MHz. Capacitance is characterized, not production tested. Symbol CI/O CIN A Port B Port CON Parameter Control Pin Input Capacitance Input / Output Capacitance Switch On Capacitance Conditions VCC=5.0V VCC, /OE=5.0V VCC=5.0V, /OE=0V Typ. 3 7 5 12 Units pF pF pF © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 4 FSAV330 — 4-Channel, 2:1 Video Switch AC Loadings and Waveforms Notes: Input drive by 50Ω source terminated in 50Ω. CL includes load and stray capacitance. Input PRR=1.0MHz, tW =500ns. Figure 3. Figure Caption Figure 4. AC Waveforms © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 5 FSAV330 — 4-Channel, 2:1 Video Switch Physical Dimensions 10.00 9.80 8.89 16 9 A B 1.75 6.00 4.00 3.80 5.6 PIN ONE INDICATOR 1 8 1.27 (0.30) 0.51 0.35 0.25 M 1.27 CBA 0.65 LAND PATTERN RECOMMENDATION 1.75 MAX 1.50 1.25 0.25 0.10 C 0.10 C SEE DETAIL A 0.25 0.19 0.50 0.25 X 45° (R0.10) GAGE PLANE (R0.10) 8° 0° 0.36 NOTES: UNLESS OTHERWISE SPECIFIED A) THIS PACKAGE CONFORMS TO JEDEC MS-012, VARIATION AC, ISSUE C. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS D) CONFORMS TO ASME Y14.5M-1994 E) LANDPATTERN STANDARD: SOIC127P600X175-16AM F) DRAWING FILE NAME: M16AREV12. 0.90 0.50 (1.04) SEATING PLANE DETAIL A SCALE: 2:1 Figure 5. 16-Lead, Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150-inch Narrow Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 6 FSAV330 — 4-Channel, 2:1 Video Switch Physical Dimensions TOP VIEW LAND PATTERN RECOMMENDATION SIDE VIEW END VIEW DETAIL A Figure 6. 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150-inch Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 7 FSAV330 — 4-Channel, 2:1 Video Switch Physical Dimensions 5.00±0.10 4.55 5.90 4.45 7.35 0.65 4.4±0.1 1.45 5.00 0.11 12° MTC16rev4 Figure 7. 16-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 8 FSAV330 — 4-Channel, 2:1 Video Switch © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 9