FSUSB40UMX

Click here for this datasheet translated into Chinese! FSUSB40 — Low-Power, Two-Port, Hi-Speed, USB2.0 (480Mbps) Switch September 2008 FSUSB40 — Low-Power, Two-Port, Hi-Speed, USB2.0 (480Mbps) Switch Features Low On Capacitance: 5.9pF Typical Low On Resistance: 3.9Ω Typical Low Power Consumption: 1μA Maximum Description The FSUSB40 is a bi-directional, low-power, two-port, Hi-Speed, USB2.0 switch. Configured as a double-pole, double-throw switch (DPDT) switch, it is optimized for switching between two Hi-Speed (480Mbps) sources or a Hi-Speed and Full-Speed (12Mbps) source. The FSUSB40 is compatible with the requirements of USB2.0 and features an extremely low on capacitance (CON) of 5.9pF. The wide bandwidth of this device (720MHz) exceeds the bandwidth needed to pass the third harmonic, resulting in signals with minimum edge and phase distortion. Superior channel-to-channel crosstalk also minimizes interference. The FSUSB40 contains special circuitry on the switch I/O pins for applications where the VCC supply is powered-off (VCC=0), which allows the device to withstand an over-voltage condition. This device is designed to minimize current consumption even when the control voltage applied to the SEL pin is lower than the supply voltage (VCC). This feature is especially valuable to ultra-portable applications, such as cell phones, allowing for direct interface with the generalpurpose I/Os of the baseband processor. Other applications include switching and connector sharing in portable cell phones, PDAs, digital cameras, printers, and notebook computers. - 15μA Maximum ICCT over an Expanded Voltage Range (VIN=1.8V, VCC=4.3V) W ide -3db Bandwidth: > 720MHz Packaged in: - 10-Lead MicroPak™ (1.6 x 2.1mm) - 10-Lead UMLP (1.4 x 1.8mm) 8kV ESD Rating, >16kV Power/GND ESD Rating Power-Off Protection on All Ports When VCC=0V - D+/D- Pins Tolerate up to 5.25V Over-Voltage Tolerance (OVT) on all USB Ports Up to 5.25V without External Components Applications Cell phone, PDA, Digital Camera, and Notebook LCD Monitor, TV, and Set-Top Box IMPORTANT NOTE: For additional performance information, please contact analogswitch@fairchildsemi.com. Ordering Information Part Number Top Mark FSUSB40L10X FSUSB40UMX HD HC Operating Temperature Range -40 to +85°C -40 to +85°C Package 10-Lead MicroPak™ 1.6 x 2.1mm, JEDEC MO-255B 10-Lead, Quad, Ultrathin Molded Leadless Package (UMLP), 1.4 x 1.8mm Eco Status RoHS Green MicroPak™ is a trademark of Fairchild Semiconductor Corporation. For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. © 2007 Fairchild Semiconductor Corporation FSUSB40 • Rev. 1.0.7 www.fairchildsemi.com FSUSB40 — Low-Power, Two-Port, Hi-Speed, USB2.0 (480Mbps) Switch © 2007 Fairchild Semiconductor Corporation FSUSB40 • Rev. 1.0.7 www.fairchildsemi.com 10