GF1K

GF1A-GF1M GF1A - GF1M Features • • • • Low forward voltage drop. High current capability. Easy pick and place. High surge current capability. SMA/DO-214AC COLOR BAND DENOTES CATHODE General Purpose Rectifiers (Glass Passivated) Absolute Maximum Ratings* Symbol VRRM IF(AV) IFSM Tstg TJ TA = 25°C unless otherwise noted Parameter 1A Maximum Repetitive Reverse Voltage Average Rectified Forward Current, @ TL = 125°C Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave Storage Temperature Range Operating Junction Temperature 50 1B 100 1D 200 Value 1G 400 1.0 30 -65 to +175 -65 to +175 1J 600 1K 800 1M 1000 Units V A A °C °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Thermal Characteristics Symbol PD RθJA RθJL Power Dissipation Thermal Resistance, Junction to Ambient* Thermal Resistance, Junction to Lead* Parameter Value 1.8 80 26 Units W °C/W °C/W *Device mounted on PCB with 0.2 x 0.2" (5.0 x 5.0 mm) copper pad areas. Electrical Characteristics Symbol VF trr IR CT TA = 25°C unless otherwise noted Parameter 1A Forward Voltage @ 1.0 A Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Reverse Current @ rated VR TA = 25°C TA = 125°C Total Capacitance VR = 4.0 V, f = 1.0 MHz 1B Device 1D 1.0 2.0 5.0 50 15 1G 1J 1K 1M 1.2 Units V µs µA µA pF 2001 Fairchild Semiconductor Corporation GF1A-GF1M, Rev. G GF1A-GF1M General Purpose Rectifiers (Glass Passivated) (continued) Typical Characteristics Average Rectified Forward Current, IF [A] 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 Lead Temperature [ºC] 150 175 RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.2 x 0.2" (5.0 x 5.0 mm) COPPER PAD AREAS Peak Forward Surge Current, IFSM [A] 1.6 100 50 20 10 5 2 1 1 2 5 10 20 Number of Cycles at 60Hz 50 100 Figure 1. Forward Current Derating Curve Figure 2. Non-Repetitive Surge Current 100 100 Forward Current, IF [A] Reverse Current, IR [mA] 10 10 TA = 125 º C 1 TA = 7 5º C 1 0.1 0.1 TA = 2 5 º C Pulse Width = 300µS 2% Duty Cycle 0.01 TA = 2 5º C 0.01 0.4 0.6 0.8 1 1.2 1.4 1.6 Forward Voltage, VF [V] 1.8 2 0.001 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%] Figure 3. Forward Voltage Characteristics Figure 4. Reverse Current vs Reverse Voltage 100 50 Total Capacitance, CT [pF] 20 10 5 2 1 0.01 0.1 1 10 Reverse Voltage, VR [V] 100 Figure 5. Total Capacitance 2001 Fairchild Semiconductor Corporation GF1A-GF1M, Rev. G TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT ™ DenseTrench™ DOME™ EcoSPARK™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ DISCLAIMER FAST ® FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench ® QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER ® SMART START™ STAR*POWER™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET ® VCX™ STAR*POWER is used under license FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H4