KSB1022

KSB1022 KSB1022 High Power Switching Applications • High DC Current Gain • Low Collector-Emitter Saturation Voltage • Complement to KSD1417 1 TO-220F 2.Collector 3.Emitter 1.Base PNP Silicon Darlington Transisto Absolute Maximum Ratings TC=25°C unless otherwise noted Symbol VCBO VCEO VEBO IC ICP IB PC PC TJ TSTG Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current (DC) Collector Current (Pulse) Base Current Collector Dissipation (Ta=25°C) Collector Dissipation (TC=25°C) Junction Temperature Storage Temperature Value - 60 - 60 -5 -7 - 10 - 0.7 2 30 150 - 55 ~ 150 Units V V V A A A W W °C °C Electrical Characteristics TC=25°C unless otherwise noted Symbol BVCEO ICBO IEBO hFE1 hFE2 VCE(sat) VBE(sat) tON tSTG tF Parameter Collector-Emitter Breakdown Voltage Collector Cut-off Current Emitter Cut-off Current DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Turn ON Time Storage Time Fall Time Test Condition IC = - 50mA, IB = 0 VCB = - 60V, IE = 0 VEB = - 5V, IC = 0 VCE = - 3V, IC = - 3A VCE = - 3V, IC = - 7A IC = - 3A, IB = - 6mA IC = - 7A, IB = - 14mA IC = - 3A, IB = - 6mA VCC = - 45V, IC = - 3A IB1 = - IB2 = - 6mA RL = 15Ω 2000 1000 - 0.95 - 1.3 - 1.55 0.8 2 2.5 Min. - 60 Typ. Max. - 100 -4 15000 - 1.5 -2 - 2.5 V V V µs µs µs Units V µA mA ©2000 Fairchild Semiconductor International Rev. A, February 2000 KSB1022 Typical Characteristics -10 100k VCE = -3V IC[A], COLLECTOR CURRENT -8 IB = -1.5mA IB = -1mA hFE, DC CURRENT GAIN IB = -2.5mA IB = -2mA -6 10k -4 IB = -0.5mA 1k -2 IB = 0 -0 -0 -2 -4 -6 -8 -10 100 -0.1 -1 -10 -100 VCE[V], COLLECTOR-EMITTER VOLTAGE IC[A], COLLECTOR CURRENT Figure 1. Static Characteristic Figure 2. DC current Gain VBE(sat), VCE(sat)[V], SATURATION VOLTAGE -10 -10 Ic = 500 IB -9 VCE = -3V IC[A], COLLECTOR CURRENT -8 -7 -6 -5 -4 -3 -2 -1 V BE(sat) -1 V CE(sat) -0.1 -0.1 -1 -10 -0 -0.0 -0.4 -0.8 -1.2 -1.6 -2.0 -2.4 -2.8 -3.2 IC[A], COLLECTOR CURRENT VBE [V], BASE-EMITTER VOLTAGE Figure 3. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage Figure 4. Base-Emitter On Voltage -100 40 35 IC[A], COLLECTOR CURRENT -10 PC[W], POWER DISSIPATION -100 IC max(pulse) ICmax(DC) 100 DC -1 1 0m mS 30 10 1m S s 0u S 25 20 15 -0.1 10 VCEOMAX 5 -0.01 -1 -10 0 0 25 50 o 75 100 125 150 175 V CE[V], COLLECTOR-EMITTER VOLTAGE TC[ C], CASE TEMPERATURE Figure 5. Safe Operating Area Figure 6. Power Derating ©2000 Fairchild Semiconductor International Rev. A, February 2000 KSB1022 Package Demensions TO-220F 3.30 ±0.10 10.16 ±0.20 (7.00) ø3.18 ±0.10 2.54 ±0.20 (0.70) 6.68 ±0.20 15.80 ±0.20 (1.00x45°) MAX1.47 9.75 ±0.30 0.80 ±0.10 (3 ) 0° 0.35 ±0.10 2.54TYP [2.54 ±0.20] #1 0.50 –0.05 2.54TYP [2.54 ±0.20] 4.70 ±0.20 +0.10 2.76 ±0.20 9.40 ±0.20 Dimensions in Millimeters ©2000 Fairchild Semiconductor International Rev. A, February 2000 15.87 ±0.20 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ E2CMOS™ FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ DISCLAIMER HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench® QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR INTERNATIONAL. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Preliminary No Identification Needed Full Production Obsolete Not In Production ©2000 Fairchild Semiconductor International Rev. E