HJYUVS

HJ SERIES LOW COST TRIPLE HDTV FILTERS The HJ range of HDTV filters are ideally suited to monitor outputs where low cost is the prime objective. Triple package and SMD keep production costs at a minimum. • • Low cost Monitor quality • • Pre and Post, Luminance and Chrominance filters Miniature size triple filters Channel Description Filter Shape Sampling Frequency Insertion Loss at 100 kHz End Of Passband Passband Amplitude Ripple Atten @ ½ S.F. Start Of Stopband Stopband Attenuation wrt 100 kHz Stopband Measured To Delay Time at 200 kHz Rejection Notch@ S.F. Impedance Temperature Range Aqueous Washable SMD Reflow Limitations as Package Order Codes Y, R, G, B Lowpass 74.25 MHz < 1.0 dB 30.0 MHz < 0.5 dB 12 ± 3 dB 44.25 MHz > 35 dB target > 30 dB spec 100 MHz U, V Lowpass 37.125 MHz < 1.0 dB 14.5 MHz < 0.5 dB 12 ± 3 dB 22.625 MHz > 35 dB target > 30 dB spec 100 MHz Single clock cycle delay between Luma and Chroma channels > 45 dB 75 ohms 0 to 70 C Yes Data Sheet Fara309 0 > 45 dB 75 ohms 0 to 70 0C Yes Data Sheet Fara309 DR00293D DR00293D HJYUVF – HDTV 4:2:2 Sampling Antialiasing Filter HJRGBF – HDTV 4:2:2 Sampling Antialiasing Filter HJYUVS – HDTV 4:2:2 Sampling Reconstruction Filter with sinx/x correction. HJRGBS – HDTV 4:2:2 Sampling Reconstruction Filter with sinx/x correction. Connection Diagram Available on Request © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice Fara227d Page 1 of 2 Sep-03(B) PACKAGE DETAIL All dimensions in millimetres (inches). Gen Tolerance ± 0,05 (0.002) unless otherwise stated. DO NOT SCALE © Faraday Technology Ltd Croft Road Newcastle-U-Lyme ST5 0QZ England Tel (044) 01782 661501 Fax 630101 24,13 (0.95) Third Angle Projection 9,91 (0.39) O/ALL 3,175 (0.125) 17,78 (0.7) 0,25 (0.01) 16 9 0,85 (0.033) 2,54 (0.1) Typ 0,5 (0.02) TOP VIEW 1 8 0,48 (0.019) Typ Notes. a. Surface Mount terminals;- 0,254 Alloy 42 Electroplate 2,5- 7,6u bright Sn90 over 1,2 - 2,5u of nickel underplating, meeting solderability requirements of MIL STD 202F Method 208F. b. Pin assignments;- Pin 1 = Input A Pin 16 = Output A Pin 4 = Input B Pin 13 = Output B Pin 7 = Input C Pin 10 = Output C Pins 9, 12 & 15 = H.F. Boost. All remaining pins = Gnd. c. For YUV filter, Y channel is channel A. A 4 D R G B L K. C D R Template: DT00292 Change Note No; Auth: A Mason Date: 01/09/03 Date: 01/09/03 Title: Drg No: 1088 FILTER ASSY OUTLINE DR00293D Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. Fara227d Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 sales@faradaytech.co.uk http://www.faradaytech.co.uk Sep-03(B) 18,29 (0.72) Max 14,35 (0.565)