F75373S

Fintek Feature Integration Technology Inc. F75373 F75373S/F75373SG Fintek Hardware Monitor IC Datasheet Release Date: July 2007 Revision: Version 0.25P Fintek Feature Integration Technology Inc. F75373 F75373 Datasheet Revision History Version 0.20P 0.21P 0.22P 0.23P 0.24P 0.25P Date 2003 Apr. 2003 July 2003 Dec 2004 July 2005 July 2007 July 9~10 Page Revision History Original version Update fan speed control mechanism description Add DC spec. in the datasheet Revise application circuit Add part no. F75373SG(Green package) and delete version ID Company readdress LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Fintek for any damages resulting from such improper use or sales. Fintek Feature Integration Technology Inc. F75373 Table of Contents 1 2 3 4 5 GENERAL DESCRIPTION ........................................................................................................................................................ 1 FEATURE ..................................................................................................................................................................................... 1 PIN CONFIGURATION .............................................................................................................................................................. 2 PIN DESCRIPTION..................................................................................................................................................................... 2 FUNCTIONAL DESCRIPTION ................................................................................................................................................. 4 5.1 5.2 5.3 5.3.1 5.3.2 5.4 5.4.1 5.4.2 5.4.3 5.4.4 5.5 5.5.1 5.5.2 5.5.3 5.6 6 ANALOG INPUT......................................................................................................................................................................... 4 ACCESS INTERFACE .................................................................................................................................................................. 5 TEMPERATURE MEASUREMENT MACHINE ................................................................................................................................ 6 Monitor Temperature from thermistor.................................................................................................................................. 6 Over Temperature Signal (OVT#) ........................................................................................................................................ 7 FAN .......................................................................................................................................................................................... 7 Fan speed count ................................................................................................................................................................... 7 Fan speed control................................................................................................................................................................. 8 Fan speed control mechanism.............................................................................................................................................. 9 FAN_Fault#.........................................................................................................................................................................11 SMI#...................................................................................................................................................................................... 11 Temperature ........................................................................................................................................................................11 Voltage ............................................................................................................................................................................... 12 Fan ..................................................................................................................................................................................... 12 VOLT_FAULT# (VOLTAGE FAULT SIGNAL) .......................................................................................................................... 13 REGISTER DESCRIPTION ..................................................................................................................................................... 13 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 CONFIGURATION REGISTER  INDEX 00H ............................................................................................................................. 13 CONFIGURATION REGISTER  INDEX 01H ............................................................................................................................. 14 CONFIGURATION REGISTER  INDEX 02H ............................................................................................................................. 14 CONFIGURATION REGISTER  INDEX 03H ............................................................................................................................. 15 SERIAL BUS ADDRESS REGISTER  INDEX 04H ..................................................................................................................... 15 VALUE RAM  INDEX 10H- 2FH ........................................................................................................................................... 16 IRQ/SMI# ENABLE REGISTER 1  INDEX 30H.................................................................................................................... 17 INTERRUPT STATUS REGISTER 1  INDEX 31H ....................................................................................................................... 18 REAL TIME STATUS REGISTER 1  INDEX 32H ....................................................................................................................... 18 IRQ/SMI# ENABLE REGISTER 2  INDEX 33H ................................................................................................................ 19 INTERRUPT STATUS REGISTER 2  INDEX 34H ................................................................................................................... 19 Fintek Feature Integration Technology Inc. F75373 6.12 6.13 6.14 6.15 6.16 6.17 6.18 6.19 6.20 6.21 6.22 6.23 6.24 6.25 6.26 6.27 6.28 6.29 6.30 6.31 6.32 6.33 6.34 6.35 6.36 6.37 6.38 6.39 6.40 6.41 6.42 6.43 6.44 6.45 6.46 6.47 FAN_FAULT/VOLT_FAULT/OVT ENABLE REGISTER  INDEX 35H ........................................................................... 20 REAL TIME FAULT STATUS REGISTER 1  INDEX 36H ..................................................................................................... 20 5.1 CHIPID(1) REGISTER – INDEX 5AH .............................................................................................................................. 21 CHIPID(2) REGISTER – INDEX 5BH.................................................................................................................................... 21 VENDOR ID(1) REGISTER – INDEX 5DH ........................................................................................................................... 21 VENDOR ID(2) REGISTER – INDEX 5EH............................................................................................................................ 21 RESET TIMER CONTROL REGISTER -- INDEX 60H ................................................................................................................ 21 FAN FAULT TIME REGISTER -- INDEX 61H ........................................................................................................................... 22 RESET-TIMER TIME REGISTER -- INDEX 62H ..................................................................................................................... 23 FAN STEP TIME DEFINED REGISTER -- INDEX 63H............................................................................................................. 23 VT1 OFFSET REGISTER -- INDEX 64H ............................................................................................................................... 23 VT2 OFFSET REGISTER -- INDEX 65H ............................................................................................................................... 24 RESERVED REGISTER  INDEX 66H ~ 68H (FINTEK USE ONLY) ..................................................................................... 24 PWMOUT1 RAISE DUTY-CYCLE  INDEX 69H ........................................................................................................... 24 PWMOUT2 RAISE DUTY-CYCLE  INDEX 6AH .......................................................................................................... 25 PWMOUT1 DROP DUTY-CYCLE  INDEX 6BH ........................................................................................................... 25 PWMOUT2 DROP DUTY-CYCLE  INDEX 6CH ........................................................................................................... 25 RESERVED REGISTER  INDEX 6DH ~ 6FH (FINTEK USE ONLY) .................................................................................... 25 FAN1 FULL SPEED COUNT REGISTER 0  INDEX 70H........................................................................................................ 25 FAN1 FULL SPEED COUNT REGISTER 1 INDEX71H .......................................................................................................... 26 FAN1 EXPECT TIMEOUT SPEED REGISTER  INDEX 72H .................................................................................................... 26 FAN1 EXPECT TIMEOUT SPEED REGISTER  INDEX 73H .................................................................................................... 26 FAN1 EXPECT COUNT REGISTER-- INDEX 74H .................................................................................................................... 27 FAN1 EXPECT COUNT REGISTER-- INDEX 75H .................................................................................................................... 27 FAN1 PWM_DUTY -- INDEX 76H...................................................................................................................................... 27 FAN2 FULL SPEED REGISTER 0  INDEX 80H .................................................................................................................... 27 FAN2 FULL SPEED REGISTER 1 INDEX 81H ..................................................................................................................... 28 FAN2 EXPECT TIMEOUT SPEED REGISTER  INDEX 82H .................................................................................................... 28 FAN2 EXPECT TIMEOUT SPEED REGISTER  INDEX 83H .................................................................................................... 28 FAN2 EXPECT COUNT REGISTER-- INDEX 84H .................................................................................................................... 28 FAN2 EXPECT COUNT REGISTER-- INDEX 85H .................................................................................................................... 29 PWM_DUTY -- INDEX 86H ................................................................................................................................................ 29 GPIOX OUTPUT CONTROL REGISTER – INDEX 90H............................................................................................................. 29 GPIOX OUTPUT DATA REGISTER – INDEX 91H ................................................................................................................... 30 GPIO1X INPUT STATUS REGISTER – INDEX 92H.................................................................................................................. 30 VT1 BOUNDARY 1 TEMPERATURE – INDEX A0H ........................................................................................................ 30 Fintek Feature Integration Technology Inc. F75373 6.48 6.49 6.50 6.51 6.52 6.53 6.54 6.55 6.56 6.57 6.58 6.59 6.60 6.61 6.62 6.63 6.64 6.65 6.66 6.67 6.68 6.69 6.70 6.71 6.72 6.73 6.74 6.75 7 VT1 BOUNDARY 2 TEMPERATURE – INDEX A1H ........................................................................................................ 31 VT1 BOUNDARY 3 TEMPERATURE – INDEX A2H ........................................................................................................ 31 VT1 BOUNDARY 4 TEMPERATURE – INDEX A3H ........................................................................................................ 31 FAN1 SEGMENT 1 SPEED COUNT (MSB) – INDEX A4H ............................................................................................. 32 FAN1 SEGMENT 1 SPEED COUNT (LSB) – INDEX A5H .............................................................................................. 32 FAN1 SEGMENT 2 SPEED COUNT (MSB) – INDEX A6H ............................................................................................. 32 FAN1 SEGMENT 2 SPEED COUNT (LSB) – INDEX A7H .............................................................................................. 32 FAN1 SEGMENT 3 SPEED COUNT (MSB) – INDEX A8H ............................................................................................. 33 FAN1 SEGMENT 3 SPEED COUNT (LSB) – INDEX A9H .............................................................................................. 33 FAN1 SEGMENT 4 SPEED COUNT (MSB) – INDEX AAH ............................................................................................ 33 FAN1 SEGMENT 4 SPEED COUNT (LSB) – INDEX ABH.............................................................................................. 34 FAN1 SEGMENT 5 SPEED COUNT (MSB) – INDEX ACH ............................................................................................ 34 FAN1 SEGMENT 5 SPEED COUNT (LSB) – INDEX ADH ............................................................................................. 34 VT2 BOUNDARY 1 TEMPERATURE – INDEX B0H ........................................................................................................ 34 VT2 BOUNDARY 2 TEMPERATURE – INDEX B1H ........................................................................................................ 35 VT2 BOUNDARY 3 TEMPERATURE – INDEX B2H ........................................................................................................ 35 VT2 BOUNDARY 4 TEMPERATURE – INDEX B3H ........................................................................................................ 36 FAN2 SEGMENT 1 SPEED COUNT (MSB) – INDEX B4H ............................................................................................. 36 FAN2 SEGMENT 1 SPEED COUNT (LSB) – INDEX B5H .............................................................................................. 36 FAN2 SEGMENT 2 SPEED COUNT (MSB) – INDEX B6H ............................................................................................. 36 FAN2 SEGMENT 2 SPEED COUNT (LSB) – INDEX B7H .............................................................................................. 37 FAN2 SEGMENT 3 SPEED COUNT (MSB) – INDEX B8H ............................................................................................. 37 FAN2 SEGMENT 3 SPEED COUNT (LSB) – INDEX B9H ................................................................................................ 37 FAN2 SEGMENT 4 SPEED COUNT (MSB) – INDEX BAH .............................................................................................. 38 FAN2 SEGMENT 4 SPEED COUNT (LSB) – INDEX BBH ............................................................................................... 38 FAN2 SEGMENT 5 SPEED COUNT (MSB) – INDEX BCH .............................................................................................. 38 FAN2 SEGMENT 5 SPEED COUNT (LSB) – INDEX BDH ............................................................................................... 38 RESERVED REGISTER – INDEX F0H ~ FFH (FINTEK USE ONLY) .......................................................................................... 39 ELECTRON CHARACTERISTIC .......................................................................................................................................... 39 7.1 7.2 7.3 ABSOLUTE MAXIMUM RATINGS ............................................................................................................................................. 39 DC CHARACTERISTICS ........................................................................................................................................................... 40 AC CHARACTERISTICS ........................................................................................................................................................... 41 8 9 ORDERING INFORMATION .................................................................................................................................................. 42 ACKAGE DIMENSIONS (16SOP 150MIL) ............................................................................................................................ 42 Fintek Feature Integration Technology Inc. F75373 1 General Description F75373S is a system hardware monitoring and automatic fan speed controlling IC specific designed for graphic cards etc.. F75373S can monitor several critical hardware parameters of the system, including voltages, temperatures and fan speeds which are very important for the system to work stably and properly. An 8-bit analog-to-digital converter (ADC) was built inside F75373S. The chip can monitor up to 4 analog voltage inputs, 2 fan tachometer inputs and 2 remote temperature sensors. The remote temperature sensor is suggested to be performed by thermistor. The F75373S can provide automatic fan speed control so that the system can operate at the minimum acoustic noise. Also the users can set up the upper and lower limits (alarm thresholds) of all monitored parameters and this chip can also issue warning messages for system protection when there is something wrong with monitored items. Through the BIOS or application software, the users can read all the monitored parameters of system all the time. And a pop-up warning can be also activated when the monitored item was out of the proper/pre-setting range. The application software could be Fintek's application software MyGuardTM, or IntelTM LDCM (LanDesk Client Management), or other management application software. The F75373S is in the package of 150mil 16-pin SOP and powered by 3.3V. 2 Feature 4 voltage inputs -- typical for Vcore, VDDQ, and VCC3V etc Monitor up to 2 remote temperature sensor from remote thermistor Up to 2 fan speed monitoring input and 2 automatic fan speed control -- 3 flexible fan control mode: Manual mode, Speed mode and Temperature mode. Programmable limited and setting points(alert threshold) for all monitored items Issue FAN_FAULT# or VOLT_FAULT# or OVT# or SMI# signal to activate system protection Up to 4 general purpose I/O support 2-wire SMBus interface VCC3V operation and 16SOP package(150mil) Noted: Patented TW207103 TW207104 TW220442 US6788131 B1 1 V0.25P Fintek Feature Integration Technology Inc. F75373 3 Pin Configuration FANIN1 FANIN2/GPIO0 PWMOUT1/ADDR_TRAP PWMOUT2/GPIO1 FAN_FAULT#/SMI#/GPIO2 VOLT_FAULT#/OVT#GPIO3 SCLK SDATA 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC VT1 VT2 VREF VIN1 VIN2 VIN3 GND 4 Pin Description O8 - TTL level output pin with 8 mA source-sink capability capability I/OD8 I/OD16 AOUT OD16 INt INts INtsd100k INts/OD12 - TTL level bi-directional pin, can select to O.D or OUT by register, with 12mA source-sink - TTL level bi-directional pin, Open-drain outpu with 8 mA sink capability - TTL level bi-directional pin, Open-drain outpu with 16 mA sink capability - Output pin(Analog) - Open-drain output pin with 16 mA sink capability - TTL level input pin - TTL level input pin and schmitt trigger - TTL level input pin and schmitt trigger with internal pull down 100K ohm - Input pin(Analog) - Power Power Pin Pin No. 16 9 Pin Name VCC GND Type P P Description 3.3V power supply voltage input GND AIN P 2 V0.25P Fintek Monitoring Items and Fan Speed Control Pin No. 1 2 Pin Name FANIN1 GPIO0 FANIN2 3 PWMOUT1 ADDR_TRAP 4 GPIO1 PWMOUT2 10 11 12 14 15 VIN3 VIN2 VIN1 VT2 VT1 Type INt INts/OD8 INt O12 Feature Integration Technology Inc. F75373 Description 0V to +3.3V amplitude fan tachometer input. (Default) General purpose I/O pin. Default Open drain 0V to +3.3V amplitude fan tachometer input. Fan speed control pin. Address power on trapping pin. Internal pull down100k ohm (Default) General purpose I/O pin. Default Open drain Fan speed control pin. 0V to 2.048V FSR Analog Inputs 0V to 2.048V FSR Analog Inputs 0V to 2.048V FSR Analog Inputs Thermistor 2 terminal input Thermistor 1 terminal input. INtsd100k INts/OD12 O12 AIN AIN AIN AIN AIN Alert Signals and Others Pin No. 5 Pin Name GPIO2 SMI# FAN_FAULT# 6 GPIO3 OVT# Type INts/OD16 OD16 OD16 INts/OD8 OD8 OD8 Description (Default) General purpose I/O function. Default pure open drain System management interrupt (Pure Open Drain) This pin will be a logic LOW when the fan speed is abnormal. (Default) General purpose I/O function. Default Open drain Active-Low output. This pin will be a logic LOW when the temperature exceeds its limit. VOLT_FAULT# Active-Low output. This pin will be a logic LOW when the voltage exceeds its limit. 13 VREF AOUT Reference Voltage. 2.304v Serial Bus Control Pin Pin No. 8 7 Pin Name SDATA SCLK Type INts/OD12 INt s Description Serial Bus data. Serial Bus clock. 3 V0.25P Fintek Feature Integration Technology Inc. F75373 5 Functional Description F75373S is a system hardware monitoring and automatic fan speed controlling IC specific designed for graphic cards. The chip can monitor up to 4 analog voltage inputs, 2 fan tachometer inputs and 2 remote temperature sensors. The remote temperature sensor is suggested to be performed by thermistor. The F75373S can provide automatic fan speed control so that the system can operate at the minimum acoustic noise. Also the users can set up the upper and lower limits (alarm thresholds) of all monitored parameters and this chip can also issue warning messages for system protection when there is something wrong with monitored items. 5.1 Analog Input For the 8-bit ADC has the 7.8125mv LSB, the maximum input voltage of the analog pin is 2V. Therefore the voltage under 2V (ex:1.5V) can directly connected to these analog inputs. The voltage higher than 2V should be reduced by a factor with external resistors so as to obtain the input range. Only 3VCC is an exception for it is main power of the F75373S. Therefore 3VCC can directly connect to this chip and need no external resistors. There are two functions in this pin with 3.3V. The first function is to supply internal analog power of the F75373S and the second function is that this voltage with 3.3V is connected to internal serial resistors to monitor the +3.3V voltage. The internal serial resistors are two 50K ohm, so that the internal reduced voltage is half +3.3V. There are four voltage inputs in the F75373S and the voltage divided formula is shown as follows: VIN = V+3.3V × R2 R1 + R2 where V+3.3V is the analog input voltage, for example. If we choose R1=2K, R2=1K, the exact input voltage for V+3.3V will be 1.1V, which is within the tolerance. As for application circuit, it can be refer to the figure shown as follows. 4 V0.25P Fintek 3VCC Voltage Inputs Feature Integration Technology Inc. F75373 (directly connect to the chip) 50K VIN3.3 50K VIN (Lower than 2.048V) (directly connect to the chip) VIN(Higher than 2.048V) R1 R2 8-bit ADC with 7.8125mV LSB 10K, 1% Typical Thermister Connection R THM 10K, 25 C VREF Pin 13 Pin 14/15 VIN1(Max2.048V) R Figure 5-3 5.2 Access Interface The F75373S provides one serial access interface, Serial Bus, to read/write internal registers. The address of Serial Bus is configurable by using power-on trapping. The pin 3 (PWMOUT1/ADDR_TRAP) is multi-function pin. During power-on, this pin serves as input detection of logic high or logic low. This pin is default pull-down resistor with 100K ohms mapping the Serial Bus address 0x5A (0101_1010). Another Serial Bus address 0x5C (0101_1100) is set when external pull-up resistor with 10K ohms is connected in this pin. (a) Serial bus write to internal address register followed by the data byte 0 SCL SDA Start By Master 7 8 0 7 8 0 1 0 1 1 0 1 R/W Ack by 373S D7 D6 D5 D4 D3 D2 D1 D0 Ack by 373S Frame 1 Serial Bus Address Byte 0 Frame 2 Internal Index Register Byte 7 SCL (Continued) SDA (Continued) D7 D6 D5 D4 D3 D2 D1 D0 8 Stop by Master Frame 3 Data Byte Figure 1. Serial Bus Write to Internal Address Register followed by the Data Byte 5 V0.25P Fintek Feature Integration Technology Inc. F75373 (b) Serial bus read form internal address register followed by the data byte SCL SDA Start By Master 0 7 8 0 7 8 0 1 0 1 1 0 1 R/W ack by 373S D7 D6 D5 D4 D3 D2 D1 D0 ack by 373S Frame 1 Serial Bus Address Byte 0 1 2 3 4 5 Frame 2 Internal Index Register Byte 7 8 0 1 2 3 4 5 6 6 7 8 SCL(Continued) SDA(Continued) 0 1 0 1 1 0 1 D7 ack by 373S D6 D5 D4 D3 D2 D1 D0 ack Stop by Master by 373S R/W Frame 3 Serial Bus Byte Frame 4 Data Byte Figure 2. Serial Bus read from Internal Address Register followed by the Data Byte 5.3 Temperature Measurement Machine The temperature data format is 8-bit two-complement for thermal sensor. The 8-bit temperature data can be obtained by reading through register. The format of the temperature data is show in Table 4-1. Temperature 8-Bit Binary +125°C +25°C +2°C +1°C +0°C -1°C -2°C -25°C -50°C 0111,1101 0001,1001 0000,0010 0000,0001 0000,0000 1111,1111 1111,1110 1110,0111 1100,1110 8-Bit Digital Output 8-Bit Hex 7Dh 19h 02h 01h 00h FFh FEh E7h CEh Table 4-1. 5.3.1 Monitor Temperature from thermistor The F75373S can connect two thermistors to measure environment temperature or remote temperature. The specification of thermistor should be considered to (1) β value is 3435K (2) resistor value is 10K ohm at 25°C. In the Figure 4-3, the themistor is 6 V0.25P Fintek Feature Integration Technology Inc. F75373 connected by a serial resistor with 10K Ohm, then connect to VREF (pin13). 5.3.2 Over Temperature Signal (OVT#) The F75373S can provide two external thermal sensors to detect temperature. When monitored temperature exceeds the over-temperature threshold value, OVT# will be asserted until the temperature goes below the hysteresis temperature. To T HYST OVT# Figure 5-4 5.4 Fan 5.4.1 Fan speed count Inputs are provided by the signals from fans equipped with tachometer outputs. The level of these signals should be set to TTL level, and maximum input voltage cannot be over VCC. If the input signals from the tachometer outputs are over the VCC, the external trimming circuit should be added to reduce the voltage to obtain the input specification. The normal circuit and trimming circuits are shown as follows: +12V Pull-up resister 4.7K Ohms +12V Pull-up resister < 1K or totem-pole output +12V FAN Out GND 10K 22K~30K Fan Input +12V FANIN 1 FAN Out GND > 1K Fan Input FANIN 1 F75373S 3.3V Zener FAN Connector F75373S Figure 5-5 Fan with Tach Pull-Up to +12V, or Totern-Pole Output and Register Attenuator Figure 5-6 Fan with Tach Pull-Up to +12V, or Totem-Pole Putput and Zener Clamp 7 V0.25P Fintek Feature Integration Technology Inc. F75373 +5V Pull-up resister 4.7K Ohms Pull-up resister < 1K or totem-pole output +5V FAN Out GND 10K 1K~2.7K Fan Input +5V FANIN1 FAN Out GND > 1K +5V Fan Input FANIN1 F75373S 3.3V Zener FAN Connector F75373S Figure 5-7. Fan with Tach Pull-Up to +5V, or Totern-Pole Output and Register Attenuator .Figure 5-8 Fan with Tach Pull-Up to +5V, or Totem-Pole Putput and Zener Clamp Determine the fan counter according to: Count = 1.5 × 10 6 RPM In other words, the fan speed counter has been read from register, the fan speed can be evaluated by the following equation. As for fan, it would be best to use 2 pulses tachmeter output per round. RPM = 1.5 × 10 6 Count 5.4.2 Fan speed control The F75373S provides 2 fan PWM speed control. The duty cycle of PWM can be programmed by a 8-bit register which are defined in the CR76h and CR86h. The default duty cycle is set to 100%, that is, the default 8-bit registers is set to FFh. The expression of duty can be represented as follows. Duty_cycle(%) = Programmed 8 - bit Register Value × 100% 255 +5V +12V R1 R2 D G PWM Clock Input NMOS S + C FAN PWM Clock Input G PNP Transistor R1 R2 D NMOS S + C FAN PNP Transistor Figure 5-9 Figure 5-10 8 V0.25P Fintek Feature Integration Technology Inc. F75373 5.4.3 Fan speed control mechanism There are 3 modes to control fan speed and they are manual, fan speed mode and temperature mode. For manual mode, it generally acts as PWM fan speed control. As for speed mode and temperature mode, they are more intelligent fan speed control and described as below: 5.4.3.1 Fan Speed mode Fan speed mode is an intelligent method according to expected fan speed pre-setting by BIOS. In the beginning, fan speed will operate at full speed and the F75373S will get the full speed count value. Then fan speed slows down to rotate at about 72.5% (8/11) of full speed. After that, the fan speed will automatically rotate according to the expected fan speed setting by BIOS. The register CR74h and CR75h are used for this mode. 5.4.3.2 Temperature mode At this mode, F75373S provides the clever system to automatically control fan speed related to temperature of GPU or the system. The F75373S can provide four temperature boundaries and five intervals, and each interval has its related fan speed count. All these values should be set by BIOS first. Take figure 5-11 as example. When temperature setting value is 45,55,65, and 75°C. There are five intervals and each interval is 10°C. The related desired fan speed counts for each interval are 0500h, 0400h, 0300h, 0200h, 0100h. When the temperature is within 55~65°C, the fan speed count 300h will be load into FAN EXPECT COUNTregisters(CR74h~CR75h, CR84h~CR85h). Then, F75373S will adjust PWMOUT duty-cycle to make fan speed match the expected value. It can be said that the fan will be turned on with a specific speed set by BIOS and automatically controlled with the temperature varying. The F75373S will take charge of all the fan speed control and need no software support. Desired Counts 75 Degree C 65 Degree C 0300h 55 Degree C 0400h 45 Degree C 0500h 0100h 0200h Figure 5-11 9 V0.25P Fintek 5.4.3.3 PWMOUT Duty-cycle operating process Feature Integration Technology Inc. F75373 In both “FAN SPEED” and “TEMPERATURE” modes, F75373S adjust PWMOUT duty-cycle according to current fan count and expected fan count. It will operate as follows: (1). When expected count is FFFFh, PWMOUT duty-cycle will be set to 00h to turn off fan. (2). When expected count is 0000h, PWMOUT duty-cycle will be set to FFh to turn on fan with full speed. (3). If both (1) and (2) are not true and KEEP_DROP_DUTY(see INDEX 60h) is set to 0, (a). When PWMOUT duty-cycle decrease to DROP_DUTY(≠ 00h), obviously the duty-cycle will be 00h next, F75373S will keep duty-cycle at 00h 3 seconds1. After that, F75373S starts to compare current fan count and expected count in order to increase or decrease its duty-cycle. This ensures that if there is any glitch during the 3 seconds1 period, F75373S will ignore it. (b). When PWMOUT duty-cycle increase from 00h to RAISE_DUTY(≠ 00h), F75373S also will keep duty-cycle at RAISE-DUTY 3 seconds1. After that, F75373S starts to compare current fan count and expected count in order to increase or decrease its duty-cycle. This ensures that if there is any glitch during the 3 seconds1 period, F75373S will ignore it. Note 1: The period can be programmed at INDEX 6Eh. 10 V0.25P Fintek Feature Integration Technology Inc. F75373 5.4.4 FAN_Fault# Fan_Fault will be aserted when the fan speed doesn’t meet the expected fan speed within a programmable period(default is 3 minutes) . There are two conditions may cause the FAN_FAULT#. (1). When PWM_Duty reaches FFh, the fan speed count can’t reach the fan expected count in time. (Figure 5-12) (2). When PWM_Duty reaches 00h, if the fan speed count can’t reach the fan expected count in time.(Figure 5-13) 3 min(default) Current Fan Count Expected Fan Count 100% Duty-cycle Fan_Fault# Figure 5-12 3 min(default) Expected Fan Count Current Fan Count Duty-cycle 0% Fan_Fault# Figure 5-13 5.5 SMI# 5.5.1 Temperature SMI# interrupt for temperature is shown as figure 5-13. Temperature exceeding high limit or going below hystersis will cause an interrupt if the previous interrupt has been reset by writing “1” all the interrupt Status Register. 11 V0.25P Fintek To Feature Integration Technology Inc. F75373 THYST SMI# (pulse mode) (level mode active low) * * * * *Interrupt Reset when Interrupt Status Registers are written 1 Figure 5-13 5.5.2 Voltage SMI# interrupt for voltage is shown as figure 5-14. Voltage exceeding or going below high limit will cause an interrupt if the previous interrupt has been reset by writing “1” all the interrupt Status Register. Voltage exceeding or going below low limit will result in the same condition as voltage exceeding or going below high limit. 5.5.3 Fan SMI# interrupt for fan is shown as figure 5-15 . SMI# will be asserted when the fan speed count exceeds or goes below the fan limit (Value RAM 2Ch~2Dh, 2Eh~2Fh). Voltage High limit Fan Count limit Voltage Low limit SMI# (pulse mode) (level mode) * * * * Fan Count limit SMI# (pulse mode) * * * * * * * * (level mode) *Interrupt Reset when Interrupt Status Registers are written 1 Voltage SMI# Mode Figure 5-14 FAN SMI# Mode Figure 5-15 12 V0.25P Fintek 5.6 VOLT_FAULT# (Voltage Fault Signal) Feature Integration Technology Inc. F75373 When voltage leaps from the security range setting by BIOS, the warning signal VOLT_FAULT# will be activated. Shown in figure 5-16 High limit Low limit VOLT_FAULT# Figure 5-16 6 Register Description 6.1 Configuration Register  Index 00h Power on default = 01h Bit 7 Name INIT Attribute R/W Description Set one restores power on default value to all registers except the Serial Bus Address register. This bit clears itself since the power on default is zero. 6 5-1 0 SOFT_PWDN Reserved START R/W RO R/W Set this bit to 1 will power down A/D converter circuit. Default is 0 Read back will be 0 A one enables startup of monitoring operations; a zero puts the part in standby mode. 13 V0.25P Fintek 6.2 Configuration Register  Index 01h Feature Integration Technology Inc. F75373 Power on default = 00h Bit 7-2 1 Name Reserved PIN4_MODE Attribute RO R/W Read back will be 0 Pin 4 mode select, set this bit to 1 will enable PWMOUT2 output, else if set this bit to 0, pin 4 will be enable the GPIO1 function.(default) This mode is trappable: When PIN3 trapped to high at power-on, PIN4 is set to PWMOUT2. When PIN3 trapped to low at power-on, PIN4 is set to GPIO1. 0 PIN2_MODE R/W Pin 2 mode select, set this bit to 1 will enable FANIN2 input, if set this bit to 0 pin 2 will be enable the GPIO0 function.(default). This mode is trappable: When PIN3 trapped to high at power-on, PIN2 is set to FANIN2. When PIN3 trapped to low at power-on, PIN2 is set to GPIO0. Description 6.3 Configuration Register  Index 02h Power on default = 00h Bit 7-6 Name PIN5_MODE Attribute R/W 00: pin5 function is GPIO2 01: pin5 is used as SMI 10: pin5 is used as Fan fault function 11: LED out(1Hz/0.5Hz select by bit2) 5 SMI_MODE R/W If set to 0, SMI will be level mode else if this bit set to 1, SMI will be pulse mode. 4 SMI_LEVEL R/W When set this bit to 0 SMI is low active (default). if set to 1 SMI is high active 3 2 Reserved LED_FREQ R/W R/W Reserved register When set this bit to 1 fan fault LED output frequency will be 0.5HZ, else is 1Hz(default) 1 F_FAULT_MOD E R/W When set this bit to 0 the fan fault will be level mod, else if set to 1 the fan fault will indicate by LED function(1Hz or 0.5Hz) the LED frequency can set by REG02H bit2 Description 14 V0.25P Fintek 0 F_FAULT_LEVE L R/W Feature Integration Technology Inc. F75373 When set this bit to 0 fan fault is low active (default). if set to 1 fan fault is high active 6.4 Configuration Register  Index 03h Power on default = 00h Bit 7 Name PIN6_MODE Attribute R/W 00: pin6 function is GPIO3 01: pin6 is used as OVT 10: pin6 is used as Voltage fault function 11: Reserved 5 OVT_LEVEL R/W When set this bit to 0 OVT is low active (default), else if set to 1 OVT is high active 3-4 OVT_QUEUE R/W OVT queue is use to filter the temperature noise, it define the times of the event when OVT is asserted. 00: 1 times 01: 3 times 10: 5 times 11: 7 times 2 V_FAULT_LEVE L 1-0 V_FAULT_QUE UE R/W R/W Voltage fault level. When set this bit to 0 voltage fault is low active (default). if set to 1 fan fault is high active Voltage fault queue. It is used to filter the voltage noise, the follow define the times of the event when VOLT_FAULT is asserted. 00: 1 times 01: 3 times 10: 5 times 11: 7 times Description 6.5 Serial Bus Address Register  Index 04h Power on default: 5Ah or 5Ch. Bit Name Attribute Description 15 V0.25P Fintek 7-0 SERIAL_ADDR RO Feature Integration Technology Inc. F75373 Serial Bus address. Power on default value depends on the status of pin3(PWMOUT1/ADDR_TRAP) at the moment of power on. If the pin status is 1, the value is 5Ch, otherwise is 5Ah. To read or write registers of this chip, the serial address must match this value. This register can be written by a sequence value to this register : A9h, C3h, XXh, in which XXh will be the value being written to this register; this is to protect the register from being written by accident. 6.6 Value RAM  Index 10h- 2Fh Address 10-3F 10h 11h 12h 13h 14h 15h 16h 17h 18h 19h 1Ah~1Eh 20h 21h 22h 23h 24h 25h 26h 27h 28h 29h 2A h Attribute RO RO RO RO RO RO RO RO RO RO Description VCC reading. The unit of reading is 7.8125mV. V1 reading. The unit of reading is 7.8125mV. V2 reading. The unit of reading is 7.8125mV. V3 reading. The unit of reading is 7.8125mV. Temperature 1 reading. The unit of reading is 1ºC. Temperature 2 reading. The unit of reading is 1ºC. FAN1 count reading (MSB) FAN1 count reading (LSB) FAN2 count reading (MSB) FAN2 count reading (LSB) Reserved R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W VCC High Limit. The unit is 7.8125mV. VCC Low Limit. The unit is 7.8125mV. V1 High Limit. The unit is 7.8125mV. V1 Low Limit. The unit is 7.8125mV. V2 High Limit. The unit is 7.8125mV. V2 Low Limit. The unit is 7.8125mV. V3 High Limit. The unit is 7.8125mV. V3 Low Limit. The unit is 7.8125mV. Temperature sensor 1 High Limit. The unit is 1ºC. Temperature sensor 1 Hysteresis Limit. The unit is 1ºC. Temperature sensor 2 High Limit. The unit is 1ºC. 16 V0.25P Fintek 2Bh 2Ch R/W R/W Feature Integration Technology Inc. F75373 Temperature sensor 2 Hysteresis Limit. The unit is 1ºC. FAN1 Fan Count Limit Note: It is the number of counts of the internal clock for the Low Limit of the fan speed. 2Dh R/W FAN1 Fan Count Limit Note: It is the number of counts of the internal clock for the Low Limit of the fan speed. 2Eh R/W FAN2 Fan Count Limit Note: It is the number of counts of the internal clock for the Low Limit of the fan speed. 2Fh R/W FAN2 Fan Count Limit Note: It is the number of counts of the internal clock for the Low Limit of the fan speed. Setting all ones to the high limits for voltages and fans (0111 1111 binary for temperature) means interrupts will never be generated except the case when voltages go below the low limits. 6.7 IRQ/SMI# ENABLE Register 1  Index 30h Power on default: 00h Bit 7 Name EN_FAN2_SMI Attribute R/W Description A one enables the corresponding interrupt status bit for SMI# interrupt 6 EN_FAN1_SMI R/W A one enables the corresponding interrupt status bit for SMI# interrupt. 5 EN_VT2_SMI R/W A one enables the corresponding interrupt status bit for SMI# interrupt. 4 EN_VT1_SMI R/W A one enables the corresponding interrupt status bit for SMI# interrupt. 3 EN_V3_SMI R/W A one enables the corresponding interrupt status bit for SMI# interrupt. 2 EN_V2_SMI R/W A one enables the corresponding interrupt status bit for SMI# interrupt. 1 EN_V1_SMI R/W A one enables the corresponding interrupt status bit for SMI# interrupt. 0 EN_VCC_SMI R/W A one enables the corresponding interrupt status bit for SMI# 17 V0.25P Fintek interrupt. Feature Integration Technology Inc. F75373 6.8 Interrupt Status Register 1  Index 31h Power on default: 00h Bit 7 Name FAN2_STS Attribute R/W Description A one indicates fan2 count limit has been exceeded. Write 1 to clear this bit, write 0 will be ignored. 6 FAN1_STS R/W A one indicates fan1 count limit has been exceeded. Write 1 to clear this bit, write 0 will be ignored. 5 VT2_STS R/W A one indicates a high limit of VT2 has been exceeded from temperature sensor. Write 1 to clear this bit, write 0 will be ignored. 4 VT1_STS R/W A one indicates a high limit of VT1 has been exceeded from temperature sensor. Write 1 to clear this bit, write 0 will be ignored. 3 V3_STS R/W A one indicates a high or low limit of VIN3 has been exceeded. Write 1 to clear this bit, write 0 will be ignored. 2 V2_STS R/W A one indicates a high or low limit of VIN2 has been exceeded. Write 1 to clear this bit, write 0 will be ignored. 1 V1_STS R/W A one indicates a high or low limit of VIN1 has been exceeded. Write 1 to clear this bit, write 0 will be ignored. 0 VCC_STS R/W A one indicates a high or low limit of VCC has been exceeded. Write 1 to clear this bit, write 0 will be ignored. 6.9 Real Time Status Register 1  Index 32h Power on default: 00h Bit 7 Name FAN2EXC Attribute R/W Description A one indicates fan2 count limit has been exceeded. A zero indicates fan2 count is in the safe region. 6 FAN1EXC R/W A one indicates fan1 count limit has been exceeded. A zero indicates fan1 count is in the safe region. 5 VT2EXC R/W A one indicates a high limit of VT2 has been exceeded. A zero indicates VT2 is below the hysteresis limit. 18 V0.25P Fintek 4 VT1EXC R/W Feature Integration Technology Inc. F75373 A one indicates a high limit of VT1 has been exceeded. A zero indicates VT1 is below the hysteresis limit. 3 V3EXC R/W A one indicates a high or low limit of VIN3 has been exceeded. A zero indicates VIN3 is in the safe region. 2 V2EXC R/W A one indicates a high or low limit of VIN2 has been exceeded. . A zero indicates VIN2 is in the safe region. 1 V1EXC R/W A one indicates a high or low limit of VIN1 has been exceeded. . A zero indicates VIN1 is in the safe region. 0 VCCEXC R/W A one indicates a high or low limit of VCC has been exceeded. . A zero indicates VCC is in the safe region. 6.10 IRQ/SMI# ENABLE Register 2  Index 33h Power on default: 00h Bit 7-2 1 Name Reserved EN_TARF2_SMI Attribute RO R/W Target fan2 SMI enable bit. A zero disables the corresponding interrupt status bit for SMI# interrupt 0 EN_TARF1_SMI R/W Target fan1 SMI enable bit. A zero disables the corresponding interrupt status bit for SMI# interrupt Description 6.11 Interrupt Status Register 2  Index 34h Power on default: 00h Bit 7-2 1 Name Reserved STS_TAR_FAN2 Attribute Description R/W A one indicates fan2 reading count is over then fan2 expect count, and the PWMOUT2 duty cycle is full more then the FAN FAULT TIME. Write 1 to clear this bit, write 0 will be ignored. 0 STS_TAR_FAN1 R/W A one indicates fan1 reading count is over then fan1 expect count, and the PWMOUT1 duty cycle is full more then the FAN FAULT TIME. Write 1 to clear this bit, write 0 will be ignored. 19 V0.25P Fintek Feature Integration Technology Inc. F75373 6.12 FAN_FAULT/VOLT_FAULT/OVT ENABLE Register  Index 35h Power on default: 00h Bit 7 Name EN_F2_FAULT Attribute R/W Description A one enables the fan2 fault status to be indicated in pin FAN_FUALT. 6 EN_ F1_FAULT R/W A one enables the fan1 fault status to be indicated in pin FAN_FUALT. 5 4 3 EN_T2_OVT EN_T1_OVT EN_V3_FAULT R/W R/W R/W A one enables the VT2 fault status to be indicated in pin OVT. A one enables the VT1 fault status to be indicated in pin OVT. A one enables the V3 fault status to be indicated in pin VOLT_FUALT pin. 2 EN_V2_FAULT R/W A one enables the V2 fault status to be indicated in pin VOLT _FUALT. 1 EN_V1_FAULT R/W A one enables the V1 fault status to be indicated in pin VOLT _FUALT. 0 EN_VCC_FAULT R/W A one enables the VCC fault status to be indicated in pin VOLT _FUALT. 6.13 REAL TIME Fault Status Register 1  Index 36h Power on default: 00h Bit 7 6 5 Name FAN2_FAULT FAN1_FAULT VT2_OVT Attribute RO RO RO Description A one indicates fan2 count limit exceeding. A one indicates fan1 count limit exceeding. This bit will set to 1 from high limit of VT2 is exceeded until the temperature2 is under the VT2 hysteresis Limit 4 VT1_OVT RO This bit will set to 1 from high limit of VT1 is exceeded until the temperature1 is under the VT1 hysteresis Limit 3 2 1 0 V3_FAULT V2_FAULT V1_FAULT VCC_FAULT RO RO RO RO A one indicates a high or low limit of V3 exceeding. A one indicates a high or low limit of V2 exceeding. A one indicates a high or low limit of V1 exceeding. A one indicates a high or low limit of VCC exceeding. 20 V0.25P Fintek 6.14 5.1 CHIPID(1) Register – Index 5Ah Feature Integration Technology Inc. F75373 Power-on default [7:0] =0000_0010b Bit 7-0 CHIPID Name Attribute RO Chip ID, High byte (8’h02). Description 6.15 CHIPID(2) Register – Index 5Bh Power-on default [7:0] =0000_0100b Bit 7-0 CHIPID Name Attribute RO Chip ID, Low byte (8’h04). Description 6.16 VENDOR ID(1) Register – Index 5Dh Power-on default [7:0] =0001_1001b Bit 7-0 Name VENDOR1 Attribute RO Vendor ID, 8’h19 Description 6.17 VENDOR ID(2) Register – Index 5Eh Power-on default [7:0] =0011_0100b Bit 7-0 Name VENDOR2 Attribute RO Vendor ID, 8h34 Description 6.18 Reset Timer Control Register -- Index 60h Power on default: 00h Bit 7-6 Name FAN2_MODE Attribute R/W Description 00: FAN2 operates in SPEED mode. PWMOUT2 duty-cycle is 21 V0.25P Fintek Feature Integration Technology Inc. F75373 automatically adjusted according to FAN2 EXPECT register. 01: FAN2 operates in TEMPERATURE mode. PWMOUT2 duty-cycle is automatically adjusted according to FAN2 EXPECT register, which will be automatically loaded into preset values according to the current temperature. (When PIN3 power-on trapped to 1, this mode is selected after power-on.) 1X: FAN2 operates in MANUAL mode. Software set the PWMOUT2 duty-cycle directly. 5-4 FAN1_MODE R/W 00: FAN1 operates in SPEED mode. PWMOUT1 duty-cycle is automatically adjusted according to FAN1 EXPECT register. 01: FAN1 operates in TEMPERATURE mode. PWMOUT1 duty-cycle is automatically adjusted according to FAN1 EXPECT register, which will be automatically loaded into preset values according to the current temperature. (When PIN3 power-on trapped to 1, this mode is selected after power-on.) 1X: FAN1 operates in MANUAL mode. Software set the PWMOUT1 duty-cycle directly. 3 2 Reserved KEEP_DROP_DU TY2 1 KEEP_DROP_DU TY1 0 EN_RESET_TIME R R/W R/W R/W Set to 1, keep PWMOUT2 duty-cycle decrease to DROP duty and hold. Set to 1, keep PWMOUT1 duty-cycle decrease to DROP duty and hold. Set to 1, enable interface_idle timer. Set to 0, disable the timer. When the timer is enabled, if software doesn’t access the this chip through GP_CLK and GP_DATA, the reset timer starts to count down according to the value set in INDEX 62H. When it counts down to zero, INDEX[72H, 73H] will be loaded into INDEX[74H,75H]. 6.19 Fan Fault Time Register -- Index 61h Power on default: B4h Bit 7-0 Name F_FAULT_TIME Attribute R/W Description This register determines the time of fan fault. Two conditions cause fan fault event: 22 V0.25P Fintek Feature Integration Technology Inc. F75373 (1). When PWM_Duty reaches FFh, if the fan speed count can’t reach the fan expect count in the time. (2). When PWM_Duty reaches 00h, if the fan speed count can’t reach the fan expect count in the time. The unit of this register is 1 second. The default value is 180 seconds. 6.20 RESET-Timer Time Register -- Index 62h Power on default: 09h Bit 7-0 Name F_RESET_TIME Attribute R/W Description Interface idle time. The unit of this register is 1 minute. The default value is 10 minute. More details in INDEX 60H. 6.21 FAN STEP Time defined Register -- Index 63h Power on default: 00h Bit 7-4 3:0 Name Reserved TIME_STEP Attribute RO R/W Read back will be 0 This value determines the increasing or decreasing speed of PWM_Duty The smaller value, the faster speed. Description 6.22 VT1 OFFSET Register -- Index 64h Power on default: 09h Bit 7-0 Name T1OFFSET Attribute R/W Description VT1 temperature offset register. The offset value is representative in 2’s complement. The real temperature value will be added by this offset and then will be put into temperature reading ( Value RAM 14h). The offset ranges from -128ºC to +127ºC. 7Fh : +127ºC. 23 V0.25P Fintek 01h : +5ºC. 00h : +0ºC. FFh : -1ºC. FEh : -2ºC. 80h : -128ºC. Feature Integration Technology Inc. F75373 6.23 VT2 OFFSET Register -- Index 65h Power on default: 09h Bit 7-0 Name T2OFFSET Attribute R/W Description VT2 temperature offset register. The offset value is representative in 2’s complement. The real temperature value will be added by this offset and then will be put into temperature reading ( Value RAM 15h). The offset ranges from -128ºC to +127ºC. 7Fh : +127ºC. 01h : +5ºC. 00h : +0ºC. FFh : -1ºC. FEh : -2ºC. 80h : -128ºC. 6.24 Reserved Register  Index 66h ~ 68h (FINTEK Use ONLY) 6.25 PWMOUT1 RAISE DUTY-CYCLE  Index 69h Power on default: 30h Bit 7-0 Name FAN1_RAISE_DUT Y Attribute R/W Description PWMOUT1 will increasing duty-cycle from 0 to this value rapidly. 24 V0.25P Fintek 6.26 PWMOUT2 RAISE DUTY-CYCLE  Index 6Ah Feature Integration Technology Inc. F75373 Power on default: 30h Bit 7-0 Name FAN2_RAISE_DUT Y Attribute R/W Description PWMOUT2 will increasing duty-cycle from 0 to this value rapidly 6.27 PWMOUT1 DROP DUTY-CYCLE  Index 6Bh Power on default: 25h Bit 7-0 Name FAN1_DROP_DUT Y Attribute R/W Description PWMOUT1 will decreasing duty-cycle to 0 from this value rapidly or keep duty-cycle in this value when CR60 bit1 set to 1. 6.28 PWMOUT2 DROP DUTY-CYCLE  Index 6Ch Power on default: 25h Bit 7-0 Name FAN2_DROP_DUT Y Attribute R/W Description PWMOUT2 will decreasing duty-cycle to 0 from this value rapidly or keep duty-cycle in this value when CR60 bit2 set to 1. 6.29 Reserved Register  Index 6Dh ~ 6Fh (FINTEK Use ONLY) 6.30 FAN1 Full Speed Count Register 0  Index 70h Power on default: 0000_0000b Bit 7-0 Name FAN1_FULL(MSB) Attribute RO Description When power on, the PWMOUT1 will output full duty cycle (FFh) to enable system FAN. After 10 seconds when detecting FANIN1 signal, assuming the fan has been fully turned on, the fan speed count detected will be recorded in the register. If there is no signal on 25 V0.25P Fintek Feature Integration Technology Inc. F75373 FANIN1 after power on, the PWMOUT1 will keep outputting FFh duty cycle. 6.31 FAN1 full speed Count Register 1 Index71h Power on default: 1111_1111b Bit 7-0 Name FAN1_FULL (LSB) Attribute RO Description When power on, the PWMOUT1 will output full duty cycle (FFh) to enable system FAN. After 10 seconds when detecting FANIN1 signal, assuming the fan has been fully turned on, the fan speed count detected will be recorded in the register. If there is no signal on FANIN1 after power on, the PWMOUT1 will keep outputting FFh duty cycle. 6.32 FAN1 expect timeout speed Register  Index 72h Power on default: 0000_0001b Bit 7-0 Name FAN1_TSPEED (MSB) Attribute R/W Description The fan1 timeout count, when software idle timeout is happen, this count will be load to FAN1 expect register. The default count is 11/8 of FAN1_FULL reg. ( 73% of full speed). This register is only valid at HALF-AUTOMATIC(SPEED) mode. 6.33 FAN1 expect timeout speed Register  Index 73h Power on default: 0101_1101b Bit 7-0 Name FAN1_TSPEED (LSB) Attribute R/W Description The fan1 timeout count, when software idle timeout is happen, this count will be load to FAN1 expect register. The default count is 11/8 of FAN1_FULL reg. ( 73% of full speed). This register is only valid at HALF-AUTOMATIC(SPEED) mode. 26 V0.25P Fintek 6.34 FAN1 expect count Register-- Index 74h Feature Integration Technology Inc. F75373 Power on default [7:0] = 0000_0001b Bit Name Attribute R/W Description 7-0 FAN1_EXPECT (MSB) User expect fan1 count value, program this register to control the expect fan1 speed 6.35 FAN1 expect count Register-- Index 75h Power on default [7:0] = 0101_1101b Bit Name Attribute R/W Description 7-0 FAN1_EXPECT (LSB) User expect fan1 count value, program this register to control the expect fan1 speed. 6.36 FAN1 PWM_duty -- Index 76h Power on default: 1111_1111b Bit 7-0 Name PWM_DUTY1 Attribute R/W Description PWMOUT1 duty cycle. This register is programmable at Manual mode. At SPEED or TEMPERATURE mode, this register reflects current PWMOUT duty-cycle. 6.37 FAN2 Full speed Register 0  Index 80h Power on default: 0000_0000b Bit 7-0 Name FAN2_FULL(MSB) Attribute R/W Description While PIN4 is set to PWMOUT mode, the PWMOUT2 will output full duty cycle (FFh) to enable system FAN. After 10 seconds when detecting FANIN1 signal, assuming the fan has been fully turned on, the fan speed count detected will be recorded in the register. If there is no signal on FANIN2 after power on, the PWMOUT2 will keep outputting FFh duty cycle. 27 V0.25P Fintek 6.38 FAN2 full speed Register 1 Index 81h Feature Integration Technology Inc. F75373 Power on default: 1111_1111b Bit 7-0 Name FAN2_FULL (LSB) Attribute R/W Description While PIN4 is set to PWMOUT mode, the PWMOUT2 will output full duty cycle (FFh) to enable system FAN. After 15 seconds, assuming the fan has been fully turned on, the fan speed count detected will be recorded in the register. 6.39 FAN2 expect timeout speed Register  Index 82h Power on default: 0000_0001b Bit 7-0 Name FAN2_TSPEED Attribute R/W Description The fan2 timeout count, when software idle timeout is happen, this count will be load to FAN1 expect register. The default count is 11/8 of FAN2_FULL reg. ( 73% of full speed). This register is only valid at HALF-AUTOMATIC(SPEED) mode. 6.40 FAN2 expect timeout speed Register  Index 83h Power on default: 0101_1101b Bit 7-0 Name FAN2_TSPEED (LSB) Attribute R/W Description The fan2 timeout count, when software idle timeout is happen, this count will be load to FAN2 expect register. The default count is 11/8 of FAN2_FULL reg. ( 73% of full speed). This register is only valid at HALF-AUTOMATIC(SPEED) mode. 6.41 FAN2 expect count Register-- Index 84h Power on default [7:0] = 0000_0001b Bit Name Attribute Description 28 V0.25P Fintek 7-0 FAN2_EXPECT (MSB) R/W Feature Integration Technology Inc. F75373 User expect fan2 count value, program this register to control the expect fan2 speed 6.42 FAN2 expect count Register-- Index 85h Power on default [7:0] = 0101_1101b Bit Name Attribute R/W Description 7-0 FAN2_EXPECT (LSB) User expect fan2 count value, program this register to control the expect fan2 speed 6.43 PWM_duty -- Index 86h Power on default: 1111_1111b Bit 7-0 Name PWM_DUTY2 Attribute R/W Description PWMOUT2 duty cycle. This register is programmable at MANUAL mode. At SPEED or TEMPERATURE mode, this register reflects current PWMOUT duty-cycle. 6.44 GPIOx Output Control Register – Index 90h Power-on default [7:0] =0000_0000b Bit 7-4 3 Name Reserved GPIO3_OCTRL Attribute RO R/W Read back will be 0; GPIO3 output control. Set to 1 for output function. Set to 0 for input function(default). 2 GPIO2_OCTRL R/W GPIO2 output control. If this pin serves as IRQ/SMI#, this bit has no effect. Set to 1 for output function. Set to 0 for input function(default). 1 GPIO1_OCTRL R/W GPIO1 output control. Set to 1 for output function. Set to 0 for input function(default). 0 GPIO0_OCTRL R/W GPIO0 output control. Set to 1 for output function. Set to 0 for input function(default). Description 29 V0.25P Fintek 6.45 GPIOx Output Data Register – Index 91h Feature Integration Technology Inc. F75373 Power-on default [7:0] =0000_0000b Bit 7-4 3 2 1 0 Name Reserved GPIO3_ODATA GPIO2_ODATA GPIO1_ODATA GPIO0_ODATA Attribute RO R/W R/W R/W R/W Read back will be 0; GPIO3 output data. GPIO2 output data. GPIO1 output data. GPIO0 output data. Description 6.46 GPIO1x Input Status Register – Index 92h Power-on default [7:0] = N.A. Bit 7-4 3 2 Name Reserved GPIO3_PSTS GPIO2_PSTS Attribute RO RO RO Read back will be 0 Read the GPIO3 data on the pin. Read the GPIO2 data on the pin. If this pin serves as IRQ/SMI#, this bit always indicates 0, that is, read will return 0. 1 0 GPIO1_PSTS GPIO0_PSTS RO RO Read the GPIO1 data on the pin. Read the GPIO0 data on the pin. Description INDEX A0 -- AD registers – FAN1 CONTROL v.s. TEMPERATURE 1 6.47 VT1 BOUNDARY 1 TEMPERATURE – Index A0h Power-on default [7:0] =0011_1100b Bit 7-0 Name BOUND1TMP Attribute R/W Description The 1st BOUNDARY temperature for VT1 in temperature mode. When VT1 temperature is exceed this boundary, FAN1 segment 1 speed count registers(INDEX A4h, A5h) will be loaded into FAN1 expect count registers(INDEX 74h,75h). When VT1 temperature is below this boundary, FAN1 segment 2 speed count registers(INDEX A6h, A7h) will be loaded into FAN1 30 V0.25P Fintek Feature Integration Technology Inc. F75373 expect count registers(INDEX 74h,75h). 6.48 VT1 BOUNDARY 2 TEMPERATURE – Index A1h Power-on default [7:0] =0011_0010b Bit 7-0 Name BOUND2TMP Attribute R/W nd Description The 2 BOUNDARY temperature for VT1 in temperature mode. When VT1 temperature is exceed this boundary, FAN1 segment 2 speed count registers(INDEX A6h, A7h) will be loaded into FAN1 expect count registers(INDEX 74h,75h). When VT1 temperature is below this boundary, FAN1 segment 3 speed count registers(INDEX A8h, A9h) will be loaded into FAN1 expect count registers(INDEX 74h,75h). 6.49 VT1 BOUNDARY 3 TEMPERATURE – Index A2h Power-on default [7:0] =0010_1000b Bit 7-0 Name BOUND3TMP Attribute R/W rd Description The 3 BOUNDARY temperature for VT1 in temperature mode. When VT1 temperature is exceed this boundary, FAN1 segment 3 speed count registers(INDEX A8h, A9h) will be loaded into FAN1 expect count registers(INDEX 74h,75h). When VT1 temperature is below this boundary, FAN1 segment 4 speed count registers(INDEX AAh, ABh) will be loaded into FAN1 expect count registers(INDEX 74h,75h). 6.50 VT1 BOUNDARY 4 TEMPERATURE – Index A3h Power-on default [7:0] =0001_1110b Bit 7-0 Name BOUND4TMP Attribute R/W Description The 4th BOUNDARY temperature for VT1 in temperature mode. When VT1 temperature is exceed this boundary, FAN1 segment 4 speed count registers(INDEX AAh, ABh) will be loaded into FAN1 31 V0.25P Fintek Feature Integration Technology Inc. F75373 expect count registers(INDEX 74h,75h). When VT1 temperature is below this boundary, FAN1 segment 5 speed count registers(INDEX ACh, ADh) will be loaded into FAN1 expect count registers(INDEX 74h,75h). 6.51 FAN1 SEGMENT 1 SPEED COUNT (MSB) – Index A4h Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC1SPEED (MSB) Attribute R/W st Description The MSB of 1 expected fan speed for FAN1 in temperature mode. After detecting FAN1 full speed, 00h will be loaded into this register. 6.52 FAN1 SEGMENT 1 SPEED COUNT (LSB) – Index A5h Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC1SPEED (LSB) Attribute R/W st Description The LSB of 1 expected fan speed for FAN1 in temperature mode. After detecting FAN1 full speed, 00h will be loaded into this register. 6.53 FAN1 SEGMENT 2 SPEED COUNT (MSB) – Index A6h Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC2SPEED (MSB) Attribute R/W nd Description The MSB of 2 expected fan speed for FAN1 in temperature mode. After detecting FAN1 full speed count, the high byte of 112.5% FAN1 FULL SPEED COUND will be loaded into this register. (ie. 88% of FULL SPEED RPM) 6.54 FAN1 SEGMENT 2 SPEED COUNT (LSB) – Index A7h Power-on default [7:0] =0000_0000b Bit Name Attribute Description 32 V0.25P Fintek 7-0 SEC2SPEED (LSB) R/W nd Feature Integration Technology Inc. F75373 The LSB of 2 expected fan speed for FAN1 in temperature mode. After detecting FAN1 full speed count, the low byte of 112.5% FAN1 FULL SPEED COUND will be loaded into this register. 6.55 FAN1 SEGMENT 3 SPEED COUNT (MSB) – Index A8h Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC3SPEED (MSB) Attribute R/W rd Description The MSB of 3 expected fan speed for FAN1 in temperature mode. After detecting FAN1 full speed count, the high byte of 131.25% FAN1 FULL SPEED COUND will be loaded into this register. (ie. 76% of FULL SPEED RPM) 6.56 FAN1 SEGMENT 3 SPEED COUNT (LSB) – Index A9h Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC3SPEED (LSB) Attribute R/W Description The LSB of 3rd expected fan speed for FAN1 in temperature mode. After detecting FAN1 full speed count, the low byte of 131.25% FAN1 FULL SPEED COUND will be loaded into this register. (ie. 76% of FULL SPEED RPM) 6.57 FAN1 SEGMENT 4 SPEED COUNT (MSB) – Index AAh Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC4SPEED (MSB) Attribute R/W Description The MSB of 4th expected fan speed for FAN1 in temperature mode. After detecting FAN1 full speed count, the high byte of 156.25% FAN1 FULL SPEED COUND will be loaded into this register. (ie. 64% of FULL SPEED RPM) 33 V0.25P Fintek 6.58 FAN1 SEGMENT 4 SPEED COUNT (LSB) – Index ABh Feature Integration Technology Inc. F75373 Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC4SPEED (LSB) Attribute R/W th Description The LSB of 4 expected fan speed for FAN1 in temperature mode. After detecting FAN1 full speed count, the low byte of 156.25% FAN1 FULL SPEED COUND will be loaded into this register. (ie. 64% of FULL SPEED RPM) 6.59 FAN1 SEGMENT 5 SPEED COUNT (MSB) – Index ACh Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC5SPEED (MSB) R/W R/W th Description The MSB of 5 expected fan speed for FAN1 in temperature mode. After detecting FAN1 full speed count, FFh will be loaded into this register. 6.60 FAN1 SEGMENT 5 SPEED COUNT (LSB) – Index ADh Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC5SPEED (LSB) Attribute R/W th Description The LSB of 5 expected fan speed for FAN1 in temperature mode. After detecting FAN1 full speed count, FFh will be loaded into this register. INDEX B0 -- BD registers – FAN2 CONTROL v.s. TEMPERATURE 2 6.61 VT2 BOUNDARY 1 TEMPERATURE – Index B0h Power-on default [7:0] =0000_0000b Bit Name Attribute Description 34 V0.25P Fintek 7-0 BOUND1TMP R/W st Feature Integration Technology Inc. F75373 The 1 BOUNDARY temperature for VT2 in temperature mode. When VT2 temperature is exceed this boundary, FAN2 segment 1 speed count registers(INDEX B4h, B5h) will be loaded into FAN1 expect count registers(INDEX 84h,85h). When VT2 temperature is below this boundary, FAN2 segment 2 speed count registers(INDEX B6h, B7h) will be loaded into FAN2 expect count registers(INDEX 84h,85h). 6.62 VT2 BOUNDARY 2 TEMPERATURE – Index B1h Power-on default [7:0] =0000_0000b Bit 7-0 Name BOUND2TMP Attribute R/W nd Description The 2 BOUNDARY temperature for VT2 in temperature mode. When VT2 temperature is exceed this boundary, FAN2 segment 2 speed count registers(INDEX B6h, B7h) will be loaded into FAN2 expect count registers(INDEX 84h,85h). When VT2 temperature is below this boundary, FAN2 segment 3 speed count registers(INDEX B8h, B9h) will be loaded into FAN2 expect count registers(INDEX 84h,85h). 6.63 VT2 BOUNDARY 3 TEMPERATURE – Index B2h Power-on default [7:0] =0000_0000b Bit 7-0 Name BOUND3TMP Attribute R/W rd Description The 3 BOUNDARY temperature for VT2 in temperature mode. When VT2 temperature is exceed this boundary, FAN2 segment 3 speed count registers(INDEX B8h, B9h) will be loaded into FAN2 expect count registers(INDEX 84h,85h). When VT2 temperature is below this boundary, FAN2 segment 4 speed count registers(INDEX BAh, BBh) will be loaded into FAN2 expect count registers(INDEX 84h,85h). 35 V0.25P Fintek 6.64 VT2 BOUNDARY 4 TEMPERATURE – Index B3h Feature Integration Technology Inc. F75373 Power-on default [7:0] =0000_0000b Bit 7-0 Name BOUND4TMP Attribute R/W th Description The 4 BOUNDARY temperature for VT2 in temperature mode. When VT2 temperature is exceed this boundary, FAN2 segment 4 speed count registers(INDEX BAh, BBh) will be loaded into FAN2 expect count registers(INDEX 84h,85h). When VT2 temperature is below this boundary, FAN2 segment 5 speed count registers(INDEX BCh, BDh) will be loaded into FAN2 expect count registers(INDEX 84h,85h). 6.65 FAN2 SEGMENT 1 SPEED COUNT (MSB) – Index B4h Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC1SPEED (MSB) Attribute R/W Description The MSB of 1st expected fan speed for FAN2 in temperature mode. After detecting FAN2 full speed, 00h will be loaded into this register. 6.66 FAN2 SEGMENT 1 SPEED COUNT (LSB) – Index B5h Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC1SPEED (LSB) Attribute R/W st Description The LSB of 1 expected fan speed for FAN2 in temperature mode. After detecting FAN2 full speed, 00h will be loaded into this register. 6.67 FAN2 SEGMENT 2 SPEED COUNT (MSB) – Index B6h Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC2SPEED Attribute R/W nd Description The MSB of 2 expected fan speed for FAN2 in temperature mode. 36 V0.25P Fintek (MSB) Feature Integration Technology Inc. F75373 After detecting FAN2 full speed count, the high byte of 112.5% FAN2 FULL SPEED COUND will be loaded into this register. (ie. 88% of FULL SPEED RPM) 6.68 FAN2 SEGMENT 2 SPEED COUNT (LSB) – Index B7h Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC2SPEED (LSB) Attribute R/W nd Description The LSB of 2 expected fan speed for FAN2 in temperature mode. After detecting FAN2 full speed count, the low byte of 112.5% FAN2 FULL SPEED COUND will be loaded into this register. (ie. 88% of FULL SPEED RPM) 6.69 FAN2 SEGMENT 3 SPEED COUNT (MSB) – Index B8h Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC3SPEED (MSB) Attribute R/W Description The MSB of 3rd expected fan speed for FAN2 in temperature mode. After detecting FAN2 full speed count, the high byte of 131.25% FAN2 FULL SPEED COUND will be loaded into this register. (ie. 76% of FULL SPEED RPM) 6.70 FAN2 SEGMENT 3 SPEED COUNT (LSB) – Index B9h Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC3SPEED (LSB) Attribute R/W Description The LSB of 3rd expected fan speed for FAN2 in temperature mode. After detecting FAN2 full speed count, the low byte of 131.25% FAN2 FULL SPEED COUND will be loaded into this register. (ie. 76% of FULL SPEED RPM) 37 V0.25P Fintek 6.71 FAN2 SEGMENT 4 SPEED COUNT (MSB) – Index BAh Feature Integration Technology Inc. F75373 Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC4SPEED (MSB) Attribute R/W th Description The MSB of 4 expected fan speed for FAN2 in temperature mode. After detecting FAN2 full speed count, the high byte of 156.25% FAN2 FULL SPEED COUND will be loaded into this register. (ie. 64% of FULL SPEED RPM) 6.72 FAN2 SEGMENT 4 SPEED COUNT (LSB) – Index BBh Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC4SPEED (LSB) Attribute R/W th Description The LSB of 4 expected fan speed for FAN2 in temperature mode. After detecting FAN2 full speed count, the low byte of 156.25% FAN2 FULL SPEED COUND will be loaded into this register. (ie. 64% of FULL SPEED RPM) 6.73 FAN2 SEGMENT 5 SPEED COUNT (MSB) – Index BCh Power-on default [7:0] =0000_0000b Bit 7-0 Name SEC5SPEED (MSB) Attribute R/W Description The MSB of 5th expected fan speed for FAN2 in temperature mode. After detecting FAN2 full speed count, FFh will be loaded into this register. 6.74 FAN2 SEGMENT 5 SPEED COUNT (LSB) – Index BDh Power-on default [7:0] =0000_0000b Bit Name Attribute Description 38 V0.25P Fintek 7-0 SEC5SPEED (LSB) R/W th Feature Integration Technology Inc. F75373 The LSB of 5 expected fan speed for FAN2 in temperature mode. After detecting FAN2 full speed count, FFh will be loaded into this register. 6.75 Reserved Register – Index F0h ~ FFh (Fintek Use Only) 7 Electron Characteristic 7.1 Absolute Maximum Ratings RATING -0.5 to 4.0 -0.5 to 5.5 0 to +70 -55 to +150 UNIT V V °C °C PARAMETER Power Supply Voltage Input Voltage Operating Temperature Storage Temperature Note: Exposure to conditions beyond those listed under Absolute Maximum Ratings may adversely affect the life and reliability of the device. 39 V0.25P Fintek 7.2 DC Characteristics Feature Integration Technology Inc. F75373 (Ta = 0° C to 70°C, VDD = 3.3V ± 10%, VSS = 0V, Tja = 0.73 + Ta (air flow = 0 LPF), Tja(max) = 150°C ) PARAMETER SYM. MIN. TYP. MAX. UNIT CONDITIONS I/O12t - TTL level bi-directional pin with source-sink capability of 12 mA Input Low Voltage Input High Voltage Output Low Voltage Output High Voltage Input High Leakage Input Low Leakage VIL VIH VOL VOH ILIH ILIL 2.4 +10 -10 2.0 0.4 0.8 V V V V µA µA IOL = 12 mA IOH = - 12 mA VIN = VDD VIN = 0V I/O12ts - TTL level bi-directional pin with source-sink capability of 12 mA and schmitt-trigger level input Input Low Threshold Voltage Input High Threshold Voltage Hysteresis Output Low Voltage Output High Voltage Input High Leakage Input Low Leakage VtVt+ VTH VOL VOH ILIH ILIL 2.4 +10 -10 0.5 1.6 0.5 0.8 2.0 1.2 0.4 1.1 2.4 V V V V V µA µA VDD = 3.3 V VDD = 3.3 V VDD = 3.3 V IOL = 12 mA IOH = - 12 mA VIN = VDD VIN = 0V 40 V0.25P Fintek 7.2 DC Characteristics, continued PARAMETER SYM. MIN. TYP. MAX. Feature Integration Technology Inc. F75373 UNIT CONDITIONS OUT12t - TTL level output pin with source-sink capability of 12 mA Output Low Voltage Output High Voltage VOL VOH 2.4 0.4 V V IOL = 12 mA IOH = -12 mA OD8 - Open-drain output pin with sink capability of 8 mA Output Low Voltage VOL 0.4 V IOL = 8 mA OD12 - Open-drain output pin with sink capability of 12 mA Output Low Voltage VOL 0.4 V IOL = 12 mA OD16 - Open-drain output pin with sink capability of 16 mA Output Low Voltage VOL 0.4 V IOL = 16 mA INt - TTL level input pin Input Low Voltage Input High Voltage Input High Leakage Input Low Leakage VIL VIH ILIH ILIL 2.0 +10 -10 0.8 V V µA µA VIN = VDD VIN = 0 V INts - TTL level Schmitt-triggered input pin Input Low Threshold Voltage Input High Threshold Voltage Hysteresis Input High Leakage Input Low Leakage VtVt+ VTH ILIH ILIL 0.5 1.6 0.5 0.8 2.0 1.2 +10 -10 1.1 2.4 V V V µA µA VDD = 3.3V VDD = 3.3V VDD = 3.3 V VIN = VDD VIN = 0 V 7.3 AC Characteristics t t R SCL t R SCL t HD;SDA t HD;DAT t SU;STO SDA IN VALID DATA t SU;DAT SDA OUT Serial Bus Timing Diagram 41 V0.25P Fintek Serial Bus Timing PARAMETER SCL clock period Start condition hold time Stop condition setup-up time DATA to SCL setup time DATA to SCL hold time SCL and SDA rise time SCL and SDA fall time SYMBOL t SCL tHD;SDA tSU;STO tSU;DAT tHD;DAT tR tF - Feature Integration Technology Inc. F75373 MIN. 10 4.7 4.7 120 5 1.0 300 MAX. UNIT uS uS uS nS nS uS nS 8 Ordering Information Part Number Package Type 16 PIN SOP 16 PIN SOP (Green Package) Production Flow Commercial, 0°C to +70°C Commercial, 0°C to +70°C F75373S F75373SG 9 Package Dimensions (16SOP 150mil) 42 V0.25P Fintek Feature Integration Technology Inc. F75373 Feature Integration Technology Inc. Headquarters 3F-7, No 36, Tai Yuan St., Chupei City, Hsinchu, Taiwan 302, R.O.C. TEL : 886-3-5600168 FAX : 886-3-5600166 www: http://www.fintek.com.tw Taipei Office Bldg. K4, 7F, No.700, Chung Cheng Rd., Chungho City, Taipei, Taiwan 235, R.O.C. TEL : 866-2-8227-8027 FAX : 866-2-8227-8037 Please note that all datasheet and specifications are subject to change without notice. All the trade marks of products and companies mentioned in this datasheet belong to their respective owner 43 V0.25P Fintek Feature Integration Technology Inc. F75373 VOLTAGE MONITOR ADDRESS SELECT VCC3V PWMOUT1 R1 R28 100K 10K VIN1 R2 R3 100K VDD1 100K (2.0V) R4 VCC3V R1 ON ADDRESS=0x5Ch R1 OFF ADDRESS=0X5Ah R28 optional VCC3V VIN2 R5 150K VDD2 100K (2.5V) C1 R6 4.7K R7 4.7K R8 4.7K R9 4.7K R10 4.7K R11 4.7K FANIN1 1 2 PWMOUT1 3 4 5 6 SCLK 7 SDATA 8 0.1U U1 FANIN1 FANIN2/GPIO0 PWMOUT1/ADDR_TRAP PWMOUT2/GPIO1 FAN_FAULT#/SMI#/GPIO2 VOLT_FAULT#/OVT#/GPIO3 SCLK SDATA F75373S VCC VT1 VT2 VREF VIN1 VIN2 VIN3 GND 16 15 14 13 12 11 10 9 T1 T2 VREF VIN1 VIN2 VIN3 C2 4.7U VIN3 R13 R12 47K VDD3 100K (1.5V) SCLK SDATA VIN1,VIN2,VIN3 SIGNALS BEST INPUT LEVEL IS ABOUT 1V FAN CONTROL R16 4.7K R17 4.7K +12V VREF Q1 3906 C3 47U JP1 3 2 1 CON3 D1 1N4148 R18 VREF R19 27K FANIN1 R21 10K Title T1 TEMPERATURE MONITOR T2 10K THERMISTOR PWMOUT1 R20 100 Q2 2N7002 4.7K R15 10K 1% 10K THERMISTOR Feature Integration Technology Inc. Size A Date: Document Number F75373S Monday , April 14, 2003 Sheet 1 of 1 Rev 0.1 t RT2 t R14 10K 1% RT1 1 V0.25P