FYLS-0805UBC

SMD FYLS-0805UBC Features: Compatible with automatic placement equipment Compatible with reflow solder process. Radiation pattern. Applications: Automotive-Telecommunication Indicators Lcd Back-lights Illuminations Descriptions: Dice material: InGaN. Emitting Color: Blue. Lens Color: Water clear. Relative Lumionous Intensity(LOP @max=1) Absolute maximum ratings(Ta=25 ゜с) Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Continuous Forward Current Derating Linear From 25℃ Operating Temperature Range Storage Temperature Range Lead Soldering Temperature[4mm(.157”) From Body] MAX. Unit 70 100 20 0.4 mW mA mA mA/℃ -30℃ to +80℃ -40℃ to +85℃ 260℃ for 5 Seconds Electrical and optical characteristics(Ta=25 ゜с) Parameter Luminous Intensity Viewing Angle Peak Emission Dominant Wavelength Spectral Line Half-Width Forward Voltage Reverse Current Symbol IV 2θ1/2 λp λd △λ VF IR Min. -120 465 460 10 2.8 Typ. 170 130 470 465 15 3.2 Max. -140 475 470 20 3.6 10 Unit mcd Deg nm nm nm V µA Test Condition IF=20mA VR=5V 115 QiXin Road, NingBo, Zhejiang, China 315051 TEL:86-574-87927870, 87933652 FAX:86-574-87927917 E-mail:sales@foryard.com http:/www.foryard.com SMD Typical Electrical Characteristics Curves (25 ゜с Ambient Temperature Unless Otherwise Noted) Spectral Reduance (1) Normalized Response (1)peak@470nm /Blue Forward Current Vs Forward Voltage 50 40 30 20 10 0 2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 4.7 Relative Luminous intensity vs Forward current Forward Current(mA) Relative Intensity (Lop@20mA=1) Forward Voltage(V) Forward Current IF(mA) Forward Current Derating Curve Luminous Intensity Vs.Ambient Temperature 60 Forward Current(mA) 50 40 30 20 10 0 0 10 20 30 40 50 60 ) 70 80 90 Relative Luminous Intensity Ambient Temperature TA( Ambient Temperature TA( C ) 115 QiXin Road, NingBo, Zhejiang, China 315051 TEL:86-574-87927870, 87933652 FAX:86-574-87927917 E-mail:sales@foryard.com http:/www.foryard.com SMD Precautions For Use 1.Suggest the LEDs should be kept between 5℃ and 30℃and 60%RH or less before opening the package, The max. storage period before opening the package is 1 year. 2. After opening the package, the LEDs should be kept at 30℃/35%RH or less, and it should be used within3 hours. In the event of incomplete usage, it is advised that user preheat the remaining devices at 60±5℃ for 8 hours prior to use. 3. Reflow soldering should not be done more than twice. When soldering, don’t tress on LEDs during heating. After soldering, don’t warp the circuit board. 4. Repair should not be done after the LEDs have been soldered. When repair is unavoidable, Double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will be damaged by repair or not. Soldering Iron: Temperature at tip of iron:300 ゜с Max.(25W Soldering time: 3±1sec. Please refer to the following figure： Max) 115 QiXin Road, NingBo, Zhejiang, China 315051 TEL:86-574-87927870, 87933652 FAX:86-574-87927917 E-mail:sales@foryard.com http:/www.foryard.com SMD Package Dimensions of Device . 1.25 Cathode Mark Soldering Terminal 0.3 0.4 lED Die 1.4 1.25 2.0 PCB 1.0 1.2 Resin 0.9 1.2 0.3 0.625 0.8 0.4 Unit:mm(inches) Tape Specification: 4000pcs Per Reel. Item Spec. Tolerance Item Spec. Tolerance W P1 E F D0 D1 P0 1.2 Unit mm inches mm inches 8.00 0.32 ±0.20 ±0.0078 10P0 40.00 1.57 ±0.20 ±0.0078 Cathode 4.00 0.16 ±0.10 ±0.004 P2 2.00 0.08 ±0.05 ±0.002 1.75 0.07 ±0.10 ±0.07 A0 1.85 0.07 ±0.10 ±0.004 P2 3.50 0.14 ±0.05 ±0.002 B0 3.45 0.14 ±0.10 ±0.004 P0 1.50 0.06 +0.1/-0 ±0.004/0 K0 1.27 0.05 ±0.10 ±0.004 1.00 0.04 ±0.05 ±0.002 T 0.22 0.01 ±0.05 ±0.002 E 4.00 0.16 ±0.05 ±0.002 Unit mm inches mm inches K0 D0 A' 5° P1 A0 A' SEC:A-A' Package Dimensions of Reel: sb ? 60(2.36)+ .5(.0197)/-0 ? 178(7.0)± 1.0(.04) 9.0(.35)±0.2(.0078) ? 13.5(.53)± 0.2(.008) Unit:mm(inches) Packing and Shipping Spec. 12.0(.47)±0.15(.006)) 115 QiXin Road, NingBo, Zhejiang, China 315051 TEL:86-574-87927870, 87933652 FAX:86-574-87927917 E-mail:sales@foryard.com http:/www.foryard.com B0 t D1 F W SMD L1 sb sb Zip-lock Desiccant Antistatic Bag W1 Desiccant Spec. Spec. 203.0. Spec. 198.0 Unit:mm Box Dimension(cm):30 * 19* 11.5 ) cs (p TY Q' . NO RT PA 10 Reels per box CARTON Dimension(cm):39*32*38 6boxs/carton 0603B/0603/0805: 4000pcs*10Reels*6boxs 0805B/1206B/1206 1210/1204: 3000pcs*10Reels*6boxs* 3528:2000pcs*10Reels*6boxs 5050:1000pcs*8Reels*6boxs S KG S KG W M G. 8C *3 W N. 8*31 :3 AS ME C/NO 115 QiXin Road, NingBo, Zhejiang, China 315051 TEL:86-574-87927870, 87933652 FAX:86-574-87927917 E-mail:sales@foryard.com http:/www.foryard.com