FYLS-3528UGC

S MD FYLS 3528U FYL FYLS – 3528UGC Features: Single color Suitable for all SMT assembly and solder process. Available on tape and Reel Package :2000pcs/ Reel Description. The green source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide green Light Emitting Diode. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices.equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimension units are millimeters（Inches） 2. All dimension tolerance ±0.2mm unless otherwise noted. 3. An epoxy meniscus may extend about 1.5mm down the leads. S MD Selection Guide Part No. Dice lens type IV(mcd)@20mA Min FYLS-3528UGC Green(Gap) Water clear 85 Viewing Angle 2θ1/2 120 Typ 120 Electrical/Optical Characteristics at Ta=25゜с Symbol λd VF IR Parameter Dominate wavelength Forward Voltage Reverse Current Device Green min. 567 1.6 typ. 570 2.0 5 units nm V A test conditions IF=20mA IF=20mA VR=5V Absolute Maximum Ratings At= 25゜с Parameter Power dissipation DC Forward Current Peak Forward Current(1) Reverse Voltage Operating/storage Temperature White 60 25 140 5 -40℃ to +85℃ Units mW mA mA V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. S MD Reliability Test items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level:90% LTPD:10% NO. 1 Items Reflow test condition Temp:240℃±5℃ Min:5sec H: +100℃ 15min.～5min L:-40℃～ 15min test sample Ac/Rc Hours/Cycles Size 6Min 22pcs 0/1 2 Temperature cycle 300 Cycles 22pcs 0/1 3 4 5 6 7 High Thermal shock High Temperature Storage LOW Temperature Storage DC Operating Life Temperature /High Humidity H: +100℃ 5min.～10sec. L:-10℃ 5min temp:100℃ temp:-55℃ IF=20mA 85℃/R,H80% 300 Cycles 1000hrs. 1000hrs. 1000hrs. 1000hrs. 22pcs 22pcs 22pcs 22pcs 22pcs 0/1 0/1 0/1 0/1 0/1 (1) (1)GaP & AlGaInP 568/Green Luminous Intensity Vs.forward Current Luminous Intensity Vs.forward Current 1000 Relative luminous intensity(%) 50 40 Relative luminous intensity(%) 100 30 20 10 10 0 2.4 0 1 10 100 1000 Forward Voltage(VF)- 2.8 3.2 3.6 volts 4.0 4.4 Forward Current(mA) Luminous Intensity Vs. Ambient Temperature Forward Current Derating Curve 60 Forward Current(mA) 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 Relative Luminous Intensity 1000 100 0 -60 -35 -10 15 40 65 90 Ambient Temperature TA( C) Ambient Temperature TA( C ) S MD SMT Reflow Soldering Instuctions Number of reflow process shall be less than 2 times and cooling Process to normal temperature is required between first and second soldering process Temperature Profile (lead Solder) 230°c 4°c/sec max 8sec max 260°c Temperature Profile (lead Solder) 4°c/sec max 5sec max 140-160°c 60sec.max Above 200°c 180-200°c 60sec.max Above 220°c Temperature Temperature 4°c/sec max OVER 120 sec 4°c/sec max OVER 120 sec Time Time Recommended Soldering Pattern(Units:mm) S MD Packing Packing and Shipping Spec. L1 sb sb Zip-lock Desiccant Antistatic Bag W1 Desiccant Spec. Spec. 203.0. Spec. 198.0 Unit:mm Box Dimension(cm):30 * 19* 11.5 ) cs (p TY Q' . NO RT PA 10 Reels per box CARTON Dimension(cm):39*32*38 6boxs/carton 0603B/0603/0805: 4000pcs*10Reels*6boxs 0805B/1206B/1206 1210/1204: 3000pcs*10Reels*6boxs* 3528:2000pcs*10Reels*6boxs 5050:1000pcs*8Reels*6boxs S KG KG W M G. 8C *3 W 31 N. 8* :3 AS S C/NO ME