FC1BSBBEM32.0-T3

FC1BS 2.0mm x 1.6mm Ceramic SMD Crystal (Former FX2016B) Features • • • Tolerances down to ±10 PPM Stabilities down to ±10 PPM Temperature Ranges as wide as -55°C to +125°C STANDARD SPECIFICATIONS PARAMETERS Frequency Range Frequency Tolerance @ 25°C MAX (Unless otherwise noted) 16.000 ~ 200.000 MHz (See options below) Frequency Stability, ref 25°C Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (CO) Load Capacitance (CL) Drive Level (See options below) Aging per year (@ 25°C) Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) per J-STD-033 Termination Finish ±5 PPM 260°C / 10 Seconds x 2 N/A (See options below) -55°C ~ +125°C 3 pF (See options below) 100 µW Seal Method Lead (Pb) Free RoHS Compliant Au (0.3~1.0µm) over Ni (1.27~8.89µm) Seam Seal Yes Yes, no exemptions REACH Compliant (latest version) Yes Frequency Range (MHz) 16.000 ~ 19.199999 20.000 ~ 23.999999 24.000 ~ 29.999999 30.000 ~ 39.999999 40.000 ~ 200.000 Operating Temperature 0°C ~ +70ºC -10°C ~+60ºC -10°C ~+70ºC -20°C ~+70ºC -30°C ~+85ºC -40°C ~+85ºC -40°C ~+105ºC -40°C ~+125ºC -55°C ~+125ºC DIMENSIONS / MECHANICAL SPECIFICATIONS Operating Mode Max ESR Ω Fundamental Fundamental Fundamental Fundamental Fundamental 200 120 100 80 60 Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. AVAILABLE OPERATING TEMPERATURES AND STABILITIES Revised A: 07/23/2020 ±10 PPM ±15 PPM ±20 PPM ±25 PPM ±30 PPM O O O O O O O O O O O O O O O O O O O O O O O O O X O O O O X X X X X X X X X X X X X X X Key: O = Available, X = Not Available, N/A = Not Applicable Page 1 of 2 ±50 PPM O O O O O O O O O ±100 PPM N/A N/A N/A N/A N/A N/A O O O www.foxonline.com FC1BS 2.0mm x 1.6mm Ceramic SMD Crystal (Former FX2016B) TAPE SPECIFICATIONS (mm) A B C D E F ø1.55 4.0 4.0 3.5 8.0 0.65 REEL SPECIFICATIONS (mm) REEL QTY -T3 = 3,000 -T2 = 2,000 -T1 = 1,000 G 2.0 H I J K Ø13.0 Ø21.0 Ø60.0 Ø180.0 L M 9.0 2.0 Available Options & Part Identification for Crystal Model C1BS1 Sample PN: FC1BSEEEM32.0-T1 F Fox C1BS E Model Tolerance Number B = ±50 PPM C = ±30 PPM D = ±25 PPM E = ±20 PPM F = ±15 PPM H = ±10 PPM E E M 32.0 -T1 Stability B= ±50 PPM C = ±30 PPM D = ±25 PPM E = ±20 PPM F = ±15 PPM H = ±10 PPM Load Capacitance2 V=7pF D=8pF W=9pF E=10pF G=12pF J=15pF L=18pF M=20pF Operating Temperature C = 0 ~ +70°C D = -10 ~ +60°C E = -10 ~ +70°C F = -20 ~ +70°C K = -30 ~+85°C M = -40 ~ +85°C P = -40 ~ +105°C I = -40 ~ +125°C T = -55 ~ +125°C Frequency (MHz) Values Added Options Blank = Bulk T1 = 1,000 pcs T2 = 2,000 pcs T3 = 3,000 pcs 1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 2 Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact us for assistance Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 07/23/2020 Page 2 of 2 www.foxonline.com