FC5BSBBEM12.0-T1

FC5BS 5.0mm x 3.2mm Ceramic SMD Crystal (Former FX532B) Features • • • Tolerances down to ±10 ppm Stabilities down to ±5 ppm Temperature Ranges as wide as -55°C to +125°C STANDARD SPECIFICATIONS PARAMETERS Frequency Range Frequency Tolerance @ 25°C Frequency Stability, ref 25°C Over Operating Temp Range Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (CO) Load Capacitance (CL) MAX (Unless otherwise noted) 8.000 ~ 200.000 MHz (See options below) Drive Level Aging per year (@ 25°C) Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) per J-STD-033 Termination Finish Seal Method Lead (Pb) Free RoHS Compliant 100µW ±5 PPM 260°C / 10 Seconds x 2 1 (See options below) (See options below) -55°C ~ +125°C 5.0 pF (See options below) Au over Ni Seam Yes Yes Frequency Range (MHz) Operating Mode Max ESR Ω 8.000 ~ 9.749999 9.750 ~ 9.999999 10.000 ~ 11.999999 12.000 ~ 15.999999 16.000 ~ 19.999999 20.000 ~ 49.999999 50.000 ~ 200.000 40.000 ~ 79.999999 80.000 ~ 99.999999 100.000 ~ 133.000 Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental 3rd OT 3rd OT 3rd OT 70 60 45 35 30 25 20 100 80 60 Revised A: 06/04/2019 DIMENSIONS / MECHANICAL SPECIFICATIONS Page 1 of 3 Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. www.foxonline.com FC5BS 5.0mm x 3.2mm Ceramic SMD Crystal (Former FX532B) AVAILABLE OPERATING TEMPERATURES AND STABILITIES* Operating Temperature ±5 PPM ±10 PPM ±15 PPM ±20 PPM ±25 PPM ±30 PPM ±50 PPM 0 ~ 70°C X O O O O O O -10 ~+60°C O O O O O O O -10 ~+70°C X O O O O O O -20 ~+70°C X O O O O O O -30 ~+85°C X X O O O O O -40 ~+85°C X X O O O O O -40 ~+105°C X X X X X X O -40 ~+125°C X X X X X X O -55 ~+125°C X X X X X X O Key: O = Available, X = Not Available, N/A Not Applicable *Does not imply a stocked part. ±100 PPM N/A N/A N/A N/A N/A N/A O O O TAPE SPECIFICATIONS (mm) A ø1.55 B 4.0 C 8.0 D 5.5 E 12.0 F 1.4 REEL QTY -T1 = 1,000 REEL SPECIFICATIONS (mm) G 2.0 Revised A: 06/04/2019 H Ø13 I Ø21 J Ø80 K Ø178 Page 2 of 3 L 13.5 M 2.0 www.foxonline.com FC5BS 5.0mm x 3.2mm Ceramic SMD Crystal (Former FX532B) Available Options & Part Identification for Crystal Model C5BS1 Sample PN: FC5BSCCEM25.0-T1 F C5BS C C E M 25.0 -T1 Operating Frequency Values Added Temperature (MHz) Options C = 0 to 70°C Blank = Bulk D = -10 to +60°C T1 = 1,000 pcs E = -10 to +70°C F = -20 to +70°C K = -30 to +85°C M = -40 to +85°C P = -40 to +105°C I = -40 to +125°C T = -55 to +125°C 1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 2 Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact us for assistance Fox Model Number Tolerance B = ±50ppm C = ±30ppm D = ±25ppm E = ±20ppm F = ±15ppm H = ±10ppm Stability A = ±100 ppm B = ±50 ppm C = ±30 ppm D = ±25 ppm E = ±20 ppm F = ±15 ppm H = ±10 ppm L = ±5 ppm Load Capacitance2 E = 10pF G = 12pF J = 15pF K = 16pF L = 18pF M = 20pF Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 06/04/2019 Page 3 of 3 www.foxonline.com