FO7LS
7.0mm x 5.0mm
LVDS Oscillator
(Former F4700, F4710 Series)
Features
•
•
•
•
LVDS Output
Stabilities to ±20 PPM
Temperature Ranges as wide as -40°C to +85°C
Supply Voltages: 2.5V, 3.3V
2.5V ELECTRICAL CHARACTERISTICS
PARAMETERS
Frequency (FO)
Storage Temperature Range (TSTG)
Supply Voltage (VDD)
Input Current
(IDD)
Standby Current
Output Symmetry (50% VP-P )
Rise Time (20%~80% VP-P)
Fall Time (80%~20% VP-P)
Differential Output Voltage (VOD)
Differential Offset Voltage (VOS)
Output Termination
Start-up Time
(TS)
Output Disable Time 1
Output Enable Time 1
Aging (per year @ 25C)
Phase Jitter (12kHz~20MHz)
MAX (Unless otherwise noted)
25.0 ~ 400.0 MHz
-55 ~ +125°C
2.5V±10%
3.3V±10%
63 mA
30 µA
45% ~ 55%
0.5 nS
0.5 nS
0.247V ~ 0.454V
1.125V ~ 1.375V
100 Ohms Typical
10 mS
200 nS
10 mS
±3 PPM
1 pS
ENABLE / DISABLE FUNCTION
Pin
OPEN 1
‘1’ Level VIH ≥ 70%VDD
‘0’ Level VIL ≤ 30%VDD
1
Out 1 (pin 4), Out 2 (pin 5)
Active
Active
High Z
Available Options by Stability & Operating Temp for 2.5V
Frequency Stability2
Operating Temperature (°C)
Frequency Range (MHz)
±100PPM2
-10 ~ +70
25.0 ~ 400.0
2
±100PPM
-40 ~ +85
25.0 ~ 400.0
±100PPM2
-40 ~ +105
25.0 ~ 300.0
±50PPM2
-10 ~ +70
25.0 ~ 400.0
2
±50PPM
-40 ~ +85
25.0 ~ 400.0
±50PPM2
-40 ~ +105
25.0 ~ 300.0
2
±25PPM
-10 ~ +70
25.0 ~ 400.0
±25PPM3
-40 ~ +85
25.0 ~ 400.0
3
±20PPM
-10 ~ +70
25.0 ~ 400.0
An internal pull-up resistor from pin 1 to pin 6 allows active output if pin 1 is left open
Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change,
Vibration, reflow, and one-year aging, shock, and vibration.
3 Inclusive of 25°C tolerance and operating temperature range.
1
2
Revised A: 05/05/2020
Page 1 of 3
www.foxonline.com
FO7LS
7.0mm x 5.0mm
LVDS Oscillator
(Former F4700, F4710 Series)
DIMENSIONS / MECHANICAL
SPECIFICATIONS
Note:
*A 0.01μF capacitor should be placed between VDD
(Pin 4) and GND (Pin2) to minimize power supply line
noise.
*Dimensional drawing is for reference to critical
specifications defined by size measurements. certain
non-critical visual attributes, such as side castellation’s,
reference pin shape, etc. may vary
STANDARD SPECIFICATIONS
PARAMETERS
Maximum Soldering Temp / Time
Moisture Sensitivity Level (MSL) per J-STD-033
Termination Finish
Seal Method
Lead (Pb) Free
RoHS Compliant
REACH Compliant
Revised A: 05/05/2020
MAX (Unless otherwise noted)
260°C / 10 Seconds x 2
1
Au (0.3~1µm) over Ni (1.27~8.89µm)
Seam
Yes
Yes, no exemptions
Yes
Page 2 of 3
www.foxonline.com
FO7LS
7.0mm x 5.0mm
LVDS Oscillator
(Former F4700, F4710 Series)
TAPE SPECIFICATIONS (mm)
REEL SPECIFICATIONS (mm)
A
B
C
D
E
F
REEL QTY
G
H
I
J
K
L
M
ø1.55
4.0
8.0
7.5
16.0
2.1
-T2 = 2,000
-T1 = 1,000
2.0
Ø13
Ø21
Ø80
Ø255
17.5
2.0
Available Options & Part Identification for LVDS Oscillator O7LS*
Sample PN: FO7LSCDM125.0-T2
F
O7LS
C
D
M
125.0
-T2
Fox
Model
Number
Voltage
Stability
A = ±100PPM
B = ±50PPM
D = ±25PPM
E = ±20 PPM
Operating
Temperature
E = -10 to +70°C
M = -40 to +85°C
P = -40 to +105°C
Frequency (MHz)
Values Added
Options
Blank = Bulk
T1 = 1,000 pcs
T2 = 2,000 pcs
J = 2.5V±10%
C = 3.3V±10%
* Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available.
See stabilities and op temps table on page 2.
Reliability Test Conditions
Please contact Abracon Quality Assurance department
Revised A: 05/05/2020
Page 3 of 3
www.foxonline.com
FO7LSJBE106.25-BULK 价格&库存
很抱歉,暂时无法提供与“FO7LSJBE106.25-BULK”相匹配的价格&库存,您可以联系我们找货
免费人工找货