2429-10

Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: frontiersales@frontierusa.com Web: frontierusa.com Insert Molded Coil—2429 series A. Mechanical Drawing: B. Electrical Specification: Part No. 2429-01 2429-02 2429-03 2429-04 2429-05 2429-06 2429-07 2429-08 2429-09 2429-10 C. Features: 1. Plastic molded. 2. High reliability. 3. Low cost. L Min. (uH) 0.047 0.089 0.133 0.174 0.226 0.275 0.330 0.396 0.473 0.550 L Nom. (uH) 0.050 0.092 0.143 0.196 0.256 0.315 0.378 0.450 0.520 0.592 L Max. (uH) 0.053 0.097 0.152 0.218 0.287 0.355 0.427 0.504 0.567 0.635 Q Min. @ L Nom. ---116 @ 40MHz 111 @ 40 MHz 112 @ 40 MHz 102 @ 40 MHz 92 @ 40 MHz 92 @ 40 MHz 92 @ 40 MHz Color Brown Red Orange Yellow Green Blue Violet Gray White Black D. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway out of the top of the form. 3. Inductance greater than 0.1uH read at recommended Q meter frequency. 4. Inductance below 0.1uH calculated from readings taken at 50MHz. E. Test equipment: Q meter (HP 4342A) IMC 2429 series Mar. 01, 2002 Page 1 of 1