2436-06

Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: frontiersales@frontierusa.com Web: frontierusa.com Insert Molded Coil—2436 series A. Mechanical Drawing: B. Electrical Specification: Part No. 2436-01 2436-02 2436-03 2436-04 2436-05 2436-06 2436-07 C. Features: 1. Plastic molded. 2. High reliability. 3. Low cost. L Min. (uH) 0.0380 0.0510 0.0710 0.0860 0.1070 0.1250 0.1500 L Nom. (uH) 0.0390 0.0540 0.0760 0.0950 0.1150 0.1340 0.1560 L Max. (uH) 0.0395 0.0560 0.0810 0.1040 0.1230 0.1430 0.1620 Q Min. @ L Nom. 65 @ 50 MHz 70 @ 50 MHz 77 @ 50 MHz 80 @ 50 MHz 78 @ 50 MHz 80 @ 50 MHz 80 @ 50 MHz Color Brown Red Orange Yellow Green Blue Violet D. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway out of the top of the form. 3. Inductance greater than 0.1uH read at recommended Q meter frequency. 4. Inductance below 0.1uH calculated from readings taken at 50MHz. E. Test equipment: Q meter (HP 4342A) IMC 2436 series Mar. 15, 2002 Page 1 of 1