VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
Clearance No.: FTDI#
FTDI Chip
VM810C Datasheet
Embedded Video Engine
Credit Card Board
General Purpose Multi Media Controller
1
Introduction
The VM810C is a development module for
FTDI’s FT810, which is used to develop and
demonstrate the functionality of the FT810
Embedded Video Engine, EVE. This module
behaves as an SPI slave, and requires a SPI
Master for proper micro-controller interfacing
and system integration.
VM810C modules support 5.0” LCD panel
size options. Users can also connect to
different LCD screens as long as they meet
the FT810 technical specification and fit the
VM810C LCD connector.
VM810C50A-D, 3.3/5V microcontroller adaptor card with 5.0” LCD
VM810C50A-N, 3.3/5V microcontroller adaptor card, with 4.3/5.0”
LCD connector but no display
1.1 Features
The VM810C utilises the FTDI FT810
Embedded Video Engine. Graphic, audio and
touch features of the FT810 can be accessed
with the VM810C. For a full list of the FT810’s
features please see the FT810 datasheet.
The VM810C has the following features:
Ready to use LCD module
Options with or without 5” LCDs supporting
resistive touch with pressure sensing
On board LCD backlight LED Driver
Supports mono audio output
On board audio power amplifier and micro
speaker
Flexible power supply. Powering the
VM810C using SPI host connector, or via
USB Micro-B port, or via a 2.0mm JST
connector
5 V tolerant buffers when used with a 5V
SPI Master.
Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees
to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting
from such use.
464
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
2
Clearance No.: FTDI#
Ordering Information
Note that the kits below require a 5V/1A power supply. It is NOT provided in the development kit, but is
offered as an optional accessory, as is the USB to SPI cable, with the following part types:
Part No.
Description
VM810C50A-N
Credit Card Size VM810C module, supports 3.3/5v MCU Adapter
Board, with FPC/FFC 40 LCD connector. No display is provided.
VM810C50A-D
Credit Card Size VM810C module, supports 3.3/5v MCU Adapter
Board, with FPC/FFC 40 LCD connector. Includes 5 inch 800x480 TFT
LCD display with resistive touch panel.
VA-PSU-UK1
Accessory - UK Model 5V/1A USB Power Supply (Mfr # JX-B0520C-1-B)
VA-PSU-US1
Accessory - US Model 5V/1A USB Power Supply (Mfr # JX-B0520B-1-B)
VA-PSU-EU1
Accessory - EU Model 5V/1A USB Power Supply (Mfr # JX-B0520A-1-B)
VA800A-SPI
Accessory - High Speed Micro USB to SPI adapter for BASIC boards
based on FT232H MPSSE design
VA-FC-1M-BKW
Accessory - Flat USB A to Micro B Cable 1M- Black and White
VA-FC-1M-BLW
Accessory - Flat USB A to Micro B Cable 1M- Blue and White
VA-FC-STYLUS1
Accessory - Resistive Touch Screen Pen Stylus
Table 2-1 – Ordering information
2
Copyright © 2015 Future Technology Devices International Limited
464
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
Clearance No.: FTDI#
464
Table of Contents
1
Introduction ................................................................................... 1
1.1
Features ........................................................................................................ 1
2
Ordering Information ..................................................................... 2
3
Hardware Description ..................................................................... 4
3.1
VM810C board ............................................................................................... 4
3.2
Physical Descriptions .................................................................................... 5
3.2.1
PCB layout ................................................................................................ 5
3.2.2
VM810C Connectors ................................................................................... 6
4
Board Schematics ........................................................................... 9
5
Hardware Setup Guide .................................................................. 11
5.1
Power Configuration ................................................................................... 11
5.2
MPSSE Setup ............................................................................................... 11
6
Mechanical Dimensions ................................................................ 14
7
Specifications ............................................................................... 15
7.1
8
Optical Specification ................................................................................... 15
Contact Information ..................................................................... 16
Appendix A - References ....................................................................................... 17
Appendix C – Revision History ............................................................................... 19
3
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
3
Clearance No.: FTDI#
464
Hardware Description
Please refer to section 3.2.2 for connector settings. Some VM810C jumpers must be set to work properly
with your system.
3.1 VM810C board
Figure 3-1 – VM810C board top view
The VM810C module is intended for direct use into existing applications that require a display.This
module is suitable for interfacing with an external microcontroller that has a SPI Master channel.
The main functions of the VM810C are as follows:
Micro USB, SPI connector or 2-pin connector for power supply
3.3V regulator : Takes 5V input and outputs 3.3V for on-board circuits
WVGA(800x480) TFT LCD touch screen panel (for the VM810C50A-D module)
LCD backlight driver. On board back light driver has over voltage protection (OVP) of 34V, and
drive current 32mA.
5V tolerant buffers between the SPI master interface and the Slave interface of the FT810
o
SPI timing requirements can be referenced in the FT810 datasheet. The on board level
converter buffers introduce additional delay. The actual maximum SPI clock frequency
depends on the host system timing and connection cable length to the VM810C.
3 stage audio filter and power amplifier
8Ω speaker
Audio line out option
4
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
Clearance No.: FTDI#
464
3.2 Physical Descriptions
3.2.1
PCB layout
The VM810C is an 85.6mm x 54.1mm, four-layer printed circuit board. Board thickness is approximately
1.6mm.
Figure 3-2 – VM810C board top layer
Figure 3-3 – VM810C board bottom layer
5
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
Clearance No.: FTDI#
3.2.2 VM810C Connectors
Connectors and jumpers are described in the following sections.
CN1- 2-pin power connector
2 pin JST connector for 5V/3.3V power input to the board. Alternative to Micro USB connector.
Pin No.
Name
Type
Description
1
VCC
P
5V power supply
2
GND
Table 3-1 – CN1 Pinout
P
Ground
CN2- Micro USB Receptical
This receptical is strictly for 5V input to power the board. There is no USB Functionality
Pin No.
Name
Type
1
VBUS
P
2
NC
NA
No connection
3
NC
NA
No connection
4
NC
NA
No connection
5
GND
Table 3-2 – CN2 Pinout
Description
5V power supply
P
Ground
J1- LCD Flex Cable connector
This connector is the interface between the FT810 IC and the LCD Module.
Signal
Pin No
Description
LED K
1
LED-
LED A
2
LED+
DISP
31
HSYNC
32
VSYNC
33
DCLK
30
LCD Pixel Clock
DE
34
LCD Data Enable
R2
7
Bit 2 of Red RGB signals
R3
8
Bit 3 of Red RGB signals
R4
9
Bit 4 of Red RGB signals
R5
10
Bit 5 of Red RGB signals
R6
11
Bit 6 of Red RGB signals
R7
12
Bit 7 of Red RGB signals
LCD Display Enable
LCD Horizontal Sync
LCD Vertical Sync
6
Copyright © 2015 Future Technology Devices International Limited
464
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
Signal
Pin No
G2
15
Bit 2 of Green RGB signals
G3
16
Bit 3 of Green RGB signals
G4
17
Bit 4 of Green RGB signals
G5
18
Bit 5 of Green RGB signals
G6
19
Bit 6 of Green RGB signals
G7
20
Bit 7 of Green RGB signals
B2
23
Bit 2 of Blue RGB signals
B3
24
Bit 3 of Blue RGB signals
B4
25
Bit 4 of Blue RGB signals
B5
26
Bit 5 of Blue RGB signals
B6
27
Bit 6 of Blue RGB signals
B7
28
Bit 7 of Blue RGB signals
XP
37
touch panel X right
YM
38
touch panel Y down
XM
39
touch panel X left
YP
40
touch panel Y up
3V3
4
GND
3,5,6,13,14,21,22,29,36
NC
Table 3-3 – J1 Pinout
35
Clearance No.: FTDI#
464
Description
3V3 Power
Ground
No connect
J2 - Selection between lineout or loop back into the power amplifier.
Selection between audio lineout or loop back into the power amplifier. (Footprint only, JP2 next to J2
is connected by default for on board amplifier and on board mini speaker). If J2 is soldered and used
for audio output selection, JP2 needs to be removed.
Pin
Name
Description
1
Audio line out
Use pin 1 and 3 for FT810 audio line out to external speaker
2
Audio line in
Short pin1 and 2 to loopback FT810 audio into the on-board power amplifier
3
Audio GND
Table 3-4 – J2 Pin Options
Audio GND
J3 – SP+
Audio speaker +ve from the onboard amplifier.
J4 – SPAudio speaker -ve from the onboard amplifier.
J5- SPI Interface
This is the interface where the SPI control and data signals are routed. There are also power and
ground pins on this interface. Note J5 is not soldered on the VM810C board by default.
7
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
Pin No.
Name
Type
1
SCLK
I
SPI Clock input
2
MOSI
I
Master Out Slave in
3
MISO
O
Master In Slave out
4
CS#
I
Chip select , active low
5
INT#
OD
6
PD#
I
Active low power down input.
7
5V
P
5V power supply
8
3.3V
P
3.3V power supply
9
GND
P
Ground
GND
P
Ground
10
Table 3-5 – J5 Pinout
Clearance No.: FTDI#
Description
Host interrupt open drain output, active low.
On board 47kΩ pull-up to 3.3V.
JP1- Audio Amplifier Power Select
This jumper provides the option to select the power supply voltage for the onboard power amplifier.
Pin No.
Name
1-2
3V3 selected (default, recommended)
2-3
Table 3-6 – JP1 Pin options
5V selected
*This needs to be configured before audio can be heard.
JP2 – On board amplifier enable
Solder connection fitted by default.
JP3 - On board amplifier mute
Solder connection not fited by default. Do not fit this solder connection.
SW1 – Power source select
Pin No.
Name
1-2
Power from CN1
2-3
Power from CN2
Table 3-7 – JP1 Pin options
8
Copyright © 2015 Future Technology Devices International Limited
464
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
4
Clearance No.: FTDI#
Board Schematics
1
Figure 4-1 - FT810 and LCD circuit
9
Copyright © 2015 Future Technology Devices International Limited
464
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
Clearance No.: FTDI#
464
47k
47k
47k
R28
R29
R30
47k
47k
R26
R27
3V3
47k
5V
R25
3V3
J5
R19
R20
R21
R22
R23
R24
1
2
3
4
5
6
7
8
9
10
33R
33R
33R
33R
33R
33R
SCK
MOSI
MISO
CS#
INT#
PD#
SCK
MOSI
MISO
CS#
INT#
PD#
C27 C28 C29 C30 C31 C32
6x10pF
GND
GND
XL2
To bypass 3.3V
regulator place jumper
Shunt 0.1" on pins J5-7 and J5-8.
VBUS
SW1
SS-1290AP
U7
AP1117E33G-13
3 Vin Vout 2
1
2
3
4
5
3V3
GND
C24
19108
1
VBUS
CN2
VBUS
DD+
ID
GND
5V
CN1
1
2
0.1uF
GND
GND
GND
C25
C26
0.1uF
10uF
GND
GND
R18
USB Micro-B
0R
GND
Figure 4-2 – SPI Interface Circuit
AUD_3V3
AUDIO_L
AUDIO_L
R8
33R
5
U5
2
4 R9
R11
1k
C13
4.7nF
3
AUD_3V3
C17
R10
1k
OE
1
C16
1k
C14
4.7nF
AUDIO_L_out
0.47uF
C15
4.7nF
JP2
J2
AGND
SN74LVC1G125DBVR
0.1uF
AGND
AGND
AGND
AGND
R12
10k/1%
JP3
AUD_3V3
R13
AUDIO_SHDN#
AUDIO_SHDN#
R16
33R
1
2
ININ+
JP3-Audio Amp. Mute
Header 0.1"
20k/1%
U6
4
3
JP2-Audio Amp. Enabled
1
2
3
AGND
VDD
VO+
VOSHDN GND
BYPASS GND
SP1
6
5
8
7
9
SP+
SP-
J3
J4
1W/8Ohm
TPA6205A1
R15 20k/1%
R14
10k/1%
R17
47k
AGND
5V
3V3
XL1
Shunt 2.0mm
C18
0.47uF
AGND
C20
C19
0.22uF
AGND
1uF
AGND AGND
AUD_3V3
JP1
1
2
3
Jumper 2.0mm
FB1
600R/1A
FB2
C21
100uF
C22
0.1uF
C23
10nF
600R/1A
GND
AGND
Max peak current ~400mA for 8-ohm speaker
Figure 4-3 – Audio Circuit
10
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
5
Clearance No.: FTDI#
464
Hardware Setup Guide
5.1 Power Configuration
There are 3 methods of powering the VM810C board.
1) USB Power(5V) - Connect USB power through micro-USB cable to CN2
2) DC IN(5V) - Connect 5V to CN1
3) J5 Power(5V) - Connect 5V to J5 pin 7
The following table summarise how to power the VM810C board using the various methods.
Power Method
CN2
CN1
J5 Pin 7
SW1
USB Power
5V
N/C
N/C
Short pin 2-3
DC IN(5V)
N/C
5V
N/C
Short pin 1-2
J5 Power(5V)
N/C
N/C
5V
Any Position
Table 5-1 – Board power configuration
5.2 MPSSE Setup
To give a quick start with the VM810C development board, a Windows based Sample Application and
demo applications are provided for users to experiment and experience the FT810 in the VM810C
system. The following paragraphs provide a short description for development procedures.
MPSSE is a “multi purpose synchronous serial engine” interface available in some FTDI device (e.g.
FT2232D, FT232H, FT2232H anf FT4232H). This engine allows users to bridge from a USB port on a PC to
an SPI interface. Sample code is available for driving the FT810 over this interface with a FT232H device
that has been integrated into a cable. This device is available in the VA800A-SPI board, or C232HM-
EDHSL-0(5V) cable or C232HM-DDHSL-0(3.3V) cable.
VA800A-SPI is a MPSSE module accessory which can connect to the VM810C modules directly. Detailed
information of VA800A-SPI can be found at:
http://www.ftdichip.com/Support/Documents/DataSheets/Modules/DS_VA800A-SPI_MPSSE_Module.pdf.
More information about MPSSE cables may be found at:
http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_C232HM_MPSSE_CABLE.pdf.
In this section it is assumed the 5V version of the MPSSE cable (FTDI part no C232HM-EDHSL-0) is used.
If the 3.3V version of the MPSSE cable (FTDI part no C232HM-DDHSL-0) is available, the setup is similar
except for the power pin connection which requires an additional 5V power source to connect to CN2 or
CN1. Refer to table 5-1 for board power configuration.
11
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
Clearance No.: FTDI#
464
Figure 5-1 – VM810C connects to PC via VA800A-SPI or MPSSE cable.
Hardware Setup VA800A-SPI
Solder a 10 position single row pin header to J5 footprint of the VM810C board
Connect VA800A-SPI to the VM810C module in the correct orientation(pin1 to pin1 aligned).
Connect USB cable (e.g. FTDI accessory VA-FC-1M-BKW or VA-FC-1M-BLW) from the VA800ASPI to the PC USB host port.
VA800A-SPI will supply power to VM810C after MPSSE driver is properly loaded and the USB host
completed USB device configuration.
Hardware Setup MPSSE Cable
Solder a 10 position single row pin header to J5 footprint of the VM810C board
Connect MPSSE leads to VM810C board’s J5( SPI interface) in accordance with Table 5-2
Plug MPSSE cable to PC USB host port
Software Setup
Download PC based MPSSE software libraries. MPSSE cable and driver information can be found at
http://www.ftdichip.com/Products/Cables/USBMPSSE.htm.
Launch the Sample Application based on MPSSE from the PC
For more information on utilizing the VM810C development system with the MPSSE cable and Sample
Application, refer to AN_245. Note the procedure is the same as for previous generation VM800C
modules.
12
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
Clearance No.: FTDI#
Further documentation associated with the VM810C development system and design flow
at following link: http://www.ftdichip.com/Products/Modules/VM810C.html
464
can be found
The FT81x Programming Guide describes the programming code and formats used by the FT810. The
Sample Application is a well-formatted, and documented program that illustrates the Programming Guide,
and provides numerous design examples and reference code demonstrations.
J5 Pin number
J5 Signal
MPSSE pin number
MPSSE Signal
MPSSE Lead Color
1
SCK
2
SK
ORANGE
2
MOSI
3
DO
YELLOW
3
MISO
4
DI
GREEN
4
CS#
5
CS
BROWN
5
INT#
7
GPIOL1
PURPLE
6
PD#
9
GPIOL3
BLUE
7
5V
1
VCC
RED
8
3.3V
-
-
-
9
GND
10
GND
Black
10
GND
-
-
-
Table 5-2 – MPSSE cable (C232HM-EDHSL-0) connection
13
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
6
Clearance No.: FTDI#
Mechanical Dimensions
Figure 6-1 – PCB mechanical dimensions
Figure 6-2 – 5” WVGA LCD dimensions
14
Copyright © 2015 Future Technology Devices International Limited
464
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
7
Clearance No.: FTDI#
Specifications
7.1 Optical Specification
Table 7-1 – 5” TFT Optiocal Specification
15
Copyright © 2015 Future Technology Devices International Limited
464
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
8
Clearance No.: FTDI#
464
Contact Information
Head Office – Glasgow, UK
Branch Office – Tigard, Oregon, USA
Unit 1, 2 Seaward Place, Centurion Business Park
Glasgow G41 1HH
United Kingdom
Tel: +44 (0) 141 429 2777
Fax: +44 (0) 141 429 2758
7130 SW Fir Loop
Tigard, OR 97223
USA
Tel: +1 (503) 547 0988
Fax: +1 (503) 547 0987
E-mail (Sales)
E-mail (Support)
E-mail (General Enquiries)
E-Mail (Sales)
E-Mail (Support)
E-Mail (General Enquiries)
sales1@ftdichip.com
support1@ftdichip.com
admin1@ftdichip.com
us.sales@ftdichip.com
us.support@ftdichip.com
us.admin@ftdichip.com
Branch Office – Taipei, Taiwan
Branch Office – Shanghai, China
2F, No. 516, Sec. 1, NeiHu Road
Taipei 114
Taiwan , R.O.C.
Tel: +886 (0) 2 8797 1330
Fax: +886 (0) 2 8751 9737
Room 1103, No. 666 West Huaihai Road,
Changning District, Shanghai, 200052
China
Tel: +86 (0)21 6235 1596
Fax: +86 (0)21 6235 1595
E-mail (Sales)
E-mail (Support)
E-mail (General Enquiries)
E-mail (Sales)
E-mail (Support)
E-mail (General Enquiries)
tw.sales1@ftdichip.com
tw.support1@ftdichip.com
tw.admin1@ftdichip.com
cn.sales@ftdichip.com
cn.support@ftdichip.com
cn.admin@ftdichip.com
Web Site
http://ftdichip.com
Distributor and Sales Representatives
Please visit the Sales Network page of the FTDI Web site for the contact details of our distributor(s) and sales
representative(s) in your country.
System and equipment manufacturers and designers are responsible to ensure that their systems, and any Future Technology Devices International Ltd
(FTDI) devices incorporated in their systems, meet all applicable safety, regulatory and system-level performance requirements. All application-related
information in this document (including application descriptions, suggested FTDI devices and other materials) is provided for reference only. While FTDI
has taken care to assure it is accurate, this information is subject to customer confirmation, and FTDI disclaims all liability for system designs and for any
applications assistance provided by FTDI. Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to
defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting from such use. This document is subject to change
without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Neither the whole nor any part
of the information contained in, or the product described in this document, may be adapted or reproduced in any material or electronic form without the prior
written consent of the copyright holder. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41
1HH, United Kingdom. Scotland Registered Company Number: SC136640
16
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
Clearance No.: FTDI#
464
Appendix A - References
For module documentations, please refer to URL below:
http://www.ftdichip.com/Products/Modules/VM810C.html
FT810 datasheet: DS_FT81x
FT810 software programming guide: FT81x_Programmer_Guide
C232HM-DDHSL-0 datasheet:
http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_C232HM_MPSSE_CABLE.pdf
D2xx Programmers Guide:
http://www.ftdichip.com/Support/Documents/ProgramGuides/D2XX_Programmer's_Guide(FT_000071).p
df
AN_108: Command Processor for MPSSE and MCU Host Bus Emulation Modes
8.1.1.1.1.1.1.1.1
http://www.ftdichip.com/Support/Documents/AppNotes/AN_108_Command_
Processor_for_MPSSE_and_MCU_Host_Bus_Emulation_Modes.pdf
17
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
Clearance No.: FTDI#
464
Appendix B - List of Figures and Tables
List of Figures
Figure 3-1 – VM810C board top view ............................................................................................................. 4
Figure 3-2 – VM810C board top layer ............................................................................................................ 5
Figure 3-3 – VM810C board bottom layer ...................................................................................................... 5
Figure 4-1 - FT810 and LCD circuit ................................................................................................................ 9
Figure 4-2 – SPI Interface Circuit ................................................................................................................. 10
Figure 4-3 – Audio Circuit ............................................................................................................................. 10
Figure 5-1 – VM810C connects to PC via VA800A-SPI or MPSSE cable. ................................................. 12
Figure 6-1 – PCB mechanical dimensions .................................................................................................. 14
Figure 6-2 – 5” WVGA LCD dimensions ...................................................................................................... 14
List of Tables
Table 2-1 – Ordering information ................................................................................................................... 2
Table 3-2 – CN1 Pinout .................................................................................................................................... 6
Table 3-3 – CN2 Pinout .................................................................................................................................... 6
Table 3-4 – J1 Pinout ....................................................................................................................................... 7
Table 3-5 – J2 Pin Options .............................................................................................................................. 7
Table 3-6 – J5 Pinout ....................................................................................................................................... 8
Table 3-7 – JP1 Pin options ............................................................................................................................ 8
Table 3-8 – JP1 Pin options ............................................................................................................................ 8
Table 5-1 – Board power configuration ....................................................................................................... 11
Table 5-2 – MPSSE cable (C232HM-EDHSL-0) connection........................................................................ 13
Table 7-3 – 5” TFT Optiocal Specification ................................................................................................... 15
18
Copyright © 2015 Future Technology Devices International Limited
VM810C EVE2 Credit Card Module
Version 1.0
Document Reference No.: FT_001225
Clearance No.: FTDI#
Appendix C – Revision History
Document Title:
DS_VM810C
Document Reference No.:
FT_001225
Clearance No.:
FTDI# 464
Product Page:
http://www.ftdichip.com/eve.htm
Document Feedback:
Send Feedback
Version 1.0
Initial Datasheet relased
14 Sept 2015
19
Copyright © 2015 Future Technology Devices International Limited
464
工商网监
湘ICP备2023018690号
