MS5F5925

SPECIFICATION Device Name Type Name Spec. No. : : : IGBT MODULE 1MBI1600UC-120 MS5F 5925 Sep. 30 ’04 T.Nishimura Sep. 30 ’04 T.Miyasaka Y.Seki MS5F5925 1 13 H04-004-07b Revised Date Classification Ind. Content Records Applied date Issued date Drawn Checked Checked Approved Sep.-30-’04 Enactment T.Miyasaka Y.Seki MS5F5925 2 13 H04-004-06b 1MBI1600UC-120 / PKG.No. M142 1. Outline Drawing ( Unit : mm ) 2. Equivalent circuit MS5F5925 3 13 H04-004-03a 3.Absolute Maximum Ratings ( at Tc= 25°C unless otherwise specified ) Items Collector-Emitter voltage Gate-Emitter voltage Symbols VCES VGES Ic Collector current Icp -Ic -Ic pulse Collector Power Dissipation Junction temperature Storage temperature Isolation voltage between terminal and copper base *1 Pc Tj Tstg Viso 1 device Continuous 1ms Tc=25°C Tc=80°C Tc=25°C Tc=80°C Conditions Maximum Ratings 1200 ±20 2550 1600 5100 3200 1600 3200 7810 150 -40 ~ +125 2500 5.75 10 2.1 W °C VAC Nm Units V V A AC : 1min. Screw Torque *2 M6 Mounting Main Terminals M8 Sense Terminals M4 (*1) All terminals should be connected together when isolation test will be done. (*2) Recommendable Value : Mounting 4.25~5.75 Nm (M6) Main Terminals 8~10 Nm (M8) Sense Terminals 1.8~2.1 Nm (M4) 4. Electrical characteristics ( at Tj= 25°C unless otherwise specified) Items Zero gate voltage Collector current Gate-Emitter leakage current Gate-Emitter threshold voltage Collector-Emitter saturation voltage Inverter Input capacitance Turn-on time Turn-off time Symbols ICES IGES VGE(th) VCE(sat) (main terminal) Conditions VGE = 0V VCE = 1200V VCE = 0V VGE=±20V VCE = 20V Ic = 1600mA VGE=15V Ic = 1600A Tj= 25°C Tj=125°C Tj= 25°C Tj=125°C min. 5.5 - Characteristics typ. max. 6.2 1.95 2.20 1.75 2.00 175 0.90 0.60 0.85 0.18 2.05 2.20 1.85 2.00 0.35 0.14 1.0 3200 7.0 2.25 2.05 2.30 2.10 - Units mA nA V VCE(sat) (sense terminal) V Cies ton tr toff tf VF (main terminal) VCE=10V,VGE=0V,f=1MHz Vcc = 600V Ic = 1600A VGE=±15V Rgon = 1.3Ω Rgoff = 0.6Ω VGE=0V IF = 1600A IF = 1600A Tj= 25°C Tj=125°C Tj= 25°C Tj=125°C nF µs Forward on voltage VF (sense terminal) V Reverse recovery time Lead resistance, terminal-chip* (*) trr R lead µs mΩ Biggest internal terminal resistance among arm. MS5F5925 4 13 H04-004-03a 5. Thermal resistance characteristics Items Thermal resistance(1device) Contact Thermal resistance(1device) Symbols Rth(j-c) Rth(c-f) IGBT FWD Conditions min. - Characteristics max. typ. 0.006 0.016 0.032 - Units °C/W with Thermal Compound (*) * This is the value which is defined mounting on the additional cooling fin with thermal compound. 6. Indication on module Logo of production Lot.No. Sample.No. 1MBI1600UC-120 1600A/ 1200V Place of manufacturing (code) 7.Applicable category This specification is applied to IGBT Module named 1MBI1600UC-120 . 8.Storage and transportation notes ・ ・ ・ ・ ・ ・ The module should be stored at a standard temperature of 5 to 35°C and humidity of 45 to 75% . Store modules in a place with few temperature changes in order to avoid condensation on the module surface. Avoid exposure to corrosive gases and dust. Avoid excessive external force on the module. Store modules with unprocessed terminals. Do not drop or otherwise shock the modules when transporting. 9. Definitions of switching time ～ ～ 90% 0V L 0V V GE trr Irr 90% ～ ～ VCE Vcc Ic 90% RG V GE V CE Ic 0V 0A tr(i) tr ton toff ～ ～ Ic 10% 10% VCE tf 10% 10. Packing and Labeling Display on the packing box - Logo of production - Type name - Lot No - Products quantity in a packing box MS5F5925 5 13 H04-004-03a 11. Reliability test results Reliability Test Items Test categories Test items 1 Terminal Strength (Pull test) 2 Mounting Strength Pull force Test time Screw torque Test methods and conditions : 40N : 10±1 sec. : 1.8 ~ 2.1 N･m (M4) 4.25 ~ 5.75 N･m (M6) 8 ~ 10 N･m (M8) Test time : 10±1 sec. Range of frequency : 10 ~ 500Hz Sweeping time : 15 min. Acceleration : 100m/s2 Sweeping direction : Each X,Y,Z axis Test time : 6 hr. (2hr./direction) Maximum acceleration : 1000m/s2 Pulse width : 6.0msec. Direction : Each X,Y,Z axis Test time : 3 times/direction Storage temp. : 125±5 ℃ Test duration : 1000hr. Storage temp. : -40±5 ℃ Test duration : 1000hr. Storage temp. : 85±2 ℃ Relative humidity : 85±5% Test duration : 1000hr. Test temp. : 120±2 ℃ Test humidity : 85±5% Test duration : 96hr. Test temp. : Low temp. -40±5 ℃ High temp. 125 ±5 ℃ RT 5 ~ 35 ℃ : High ~ RT ~ Low ~ RT 1hr. 0.5hr. 1hr. 0.5hr. : 100 cycles : High temp. 100 +0 -5 (Aug.-2001 edition) Reference Number Acceptnorms of ance EIAJ ED-4701 sample number 5 5 (0:1) (0:1) Mechanical Tests Test Method 401 MethodⅠ Test Method 402 methodⅡ 3 Vibration Test Method 403 Reference 1 Condition code B 5 (0:1) 4 Shock Test Method 404 Condition code A 5 (0:1) 1 High Temperature Storage 2 Low Temperature Storage 3 Temperature Humidity Storage 4 Unsaturated Pressurized Vapor Test Method 201 Test Method 202 Test Method 103 Test code C Test Method 103 Test code E Test Method 105 5 5 5 (0:1) (0:1) (0:1) 5 (0:1) Environment Tests 5 Temperature Cycle 5 (0:1) Dwell time Number of cycles 6 Thermal Shock Test temp. ℃ Low temp. 0 ℃ Used liquid : Water with ice and boiling water Dipping time : 5 min. par each temp. Transfer time : 10 sec. Number of cycles : 10 cycles +5 -0 Test Method 307 method Ⅰ Condition code A 5 (0:1) MS5F5925 6 13 H04-004-03a Reliability Test Items Test categories Test items 1 High temperature Reverse Bias Test methods and conditions Reference Number Acceptnorms of ance EIAJ ED-4701 sample number 5 (0:1) (Aug.-2001 edition) Test Method 101 Test temp. Bias Voltage Bias Method Endurance Tests Tests Endurance Test duration 2 High temperature Bias (for gate) Test temp. Bias Voltage Bias Method Test duration 3 Temperature Humidity Bias Test temp. Relative humidity Bias Voltage Bias Method Test duration ON time OFF time Test temp. Number of cycles : Ta = 125±5 ℃ (Tj ≦ 150 ℃) : VC = 0.8×VCES : Applied DC voltage to C-E VGE = 0V : 1000hr. Test Method 101 5 (0:1) : Ta = 125±5 ℃ (Tj ≦ 150 ℃) : VC = VGE = +20V or -20V : Applied DC voltage to G-E VCE = 0V : 1000hr. : : : : : : : : : 85±2 oC 85±5% VC = 0.8×VCES Applied DC voltage to C-E VGE = 0V 1000hr. 2 sec. 18 sec. ∆ Tj=100±5 deg Tj ≦ 150 ℃, Ta=25±5 ℃ 15000 cycles Test Method 102 Condition code C 5 (0:1) 4 Intermitted Operating Life (Power cycle) ( for IGBT ) Test Method 106 5 (0:1) Failure Criteria Item Characteristic Symbol Failure criteria Unit Lower limit Upper limit LSL×0.8 USL×2 USL×2 USL×1.2 USL×1.2 USL×1.2 USL×1.2 mA µA mA V V mV mV Note Electrical Leakage current ICES characteristic ±IGES Gate threshold voltage VGE(th) Saturation voltage VCE(sat) Forward voltage VF Thermal IGBT ∆ VGE resistance or ∆ VCE FWD ∆ VF Isolation voltage Viso Visual Visual inspection inspection Peeling Plating and the others USL×1.2 Broken insulation The visual sample LSL : Lower specified limit. USL : Upper specified limit. Note : Each parameter measurement read-outs shall be made after stabilizing the components at room ambient for 2 hours minimum, 24 hours maximum after removal from the tests. And in case of the wetting tests, for example, moisture resistance tests, each component shall be made wipe or dry completely before the measurement. MS5F5925 7 13 H04-004-03a Reliability Test Results Test categorie s Number Reference Number of norms of test failure EIAJ ED-4701 sample (Aug.-2001 edition) sample Test Method 401 MethodⅠ Test Method 402 methodⅡ Test Method 403 Condition code B Test Method 404 Condition code A Test Method 201 Test Method 202 Test Method 103 Test code C Test Method 103 Test code E Test Method 105 Test Method 307 method Ⅰ Condition code A Test items Mechanical Tests 1 Terminal Strength (Pull test) 2 Mounting Strength 3 Vibration 4 Shock 1 High Temperature Storage 2 Low Temperature Storage 5 5 5 5 5 5 5 5 5 5 0 0 0 0 0 0 0 0 0 0 Environment Tests 3 Temperature Humidity Storage 4 Unsaturated Pressurized Vapor 5 Temperature Cycle 6 Thermal Shock 1 High temperature Reverse Bias Test Method 101 5 5 5 5 0 0 0 0 Endurance Tests 2 High temperature Bias ( for gate ) 3 Temperature Humidity Bias 4 Intermitted Operating Life (Power cycling) ( for IGBT ) Test Method 101 Test Method 102 Condition code C Test Method 106 MS5F5925 8 13 H04-004-03a Collector current vs. Collector-Emitter voltage (typ.) VGE=15V ,sense terminal 3600 3200 Collector current : Ic [A] Collector current : Ic [A] 2800 2400 2000 1600 1200 800 400 0 0 1 2 3 4 Tj=25°C Tj=125°C Collector current vs. Collector-Emitter voltage (typ.) Tj= 125°C,　sense terminal 3600 3200 2800 2400 2000 1600 1200 800 400 0 0 1 2 3 4 5 9V 10V VGE=20V 15V 12V 11V Collector-Emitter voltage : VCE [V] Collector-Emitter voltage : VCE [V] Collector-Emitter voltage vs. Gate-Emitter voltage (typ.) Tj=25°C ,sense terminal 10 Collector - Emitter voltage : VCE [ V ] 8 6 4 Ic=3200A Ic=1600A Ic= 800A 5 10 15 20 25 2 0 Gate - Emitter voltage : VGE [ V ] Capacitance vs. Collector-Emitter voltage (typ.) VGE=0V, f= 1MHz, Tj= 25°C 1000.0 Collector-Emitter voltage : VCE [ 200V/div ] Gate - Emitter voltage : VGE [ 5V/div ] Capacitance : Cies, Coes, Cres [ nF ] Dynamic Gate charge (typ.) Tj=25°C Cies 100.0 VCE VGE Cres 10.0 Coes 1.0 0 10 20 30 0 1000 2000 3000 4000 5000 6000 7000 8000 Gate charge : Qg [ nC ] Collector-Emitter voltage : VCE [V] MS5F5925 9 13 H04-004-03a Switching time vs. Collector current (typ.) Vcc=600V, VGE=±15V, Rgon=1.3Ω,Rgoff=0.6Ω, Tj= 125°C 10.00 Switching time : ton, tr, toff, tf [ usec ] Switching time : ton, tr, toff, tf [ usec ] 10.0 Switching time vs. Gate resistance (typ.) Vcc=600V, Ic=1600A, VGE=±15V, Tj= 125°C ton toff 1.00 ton toff tr 1.0 tr tf 0.10 tf 0.1 0.01 0 400 800 1200 1600 2000 2400 2800 Collector current : Ic [ A ] 0.1 1.0 10.0 100.0 Gate resistance : Rg [ Ω ] Switching loss vs. Collector current (typ.) Vcc=600V, VGE=±15V, Rgon=1.3Ω, Rgoff=0.6Ω,Tj=125°C 600 Switching loss : Eon, Eoff, Err [ mJ/pulse ] Switching loss : Eon, Eoff, Err [ mJ/pulse ] 500 400 300 200 Err 100 0 0 500 1000 1500 2000 2500 3000 Eoff 2400 Switching loss vs. Gate resistance (typ.) Vcc=600V, Ic=1600A, VGE=±15V, Tj= 125°C Eon 2000 1600 1200 800 400 0 0.10 1.00 10.00 Err 100.00 Eoff Eon Collector current : Ic [ A ] Gate resistance : Rg [ Ω ] Reverse bias safe operating area (max.) VGE=±15V,Tj = 125°C / chip 3500 3000 Collector current : Ic [ A ] 2500 2000 1500 1000 500 0 0 200 400 600 800 1000 1200 1400 Collector - Emitter voltage : VCE [ V ] MS5F5925 10 13 H04-004-03a Forward current vs. Forward on voltage (typ.) sense terminal 3600 3200 Tj=25°C Forward current : IF [ A ] 2800 2400 2000 1600 1200 800 400 0 0 1 2 3 4 Forward on voltage : VF [ V ] 0.01 0 Tj=125°C 10000.00 Reverse recovery current : Irr [ A ] Reverse recovery time : trr [ usec ] 1000.00 100.00 10.00 1.00 0.10 Reverse recovery characteristics (typ.) Vcc=600V, VGE=±15V, Rgon=1.3Ω,Tj=125°C Irr trr 400 800 1200 1600 2000 2400 2800 Forward current : IF [ A ] Transient thermal resistance (max.) 0.100 Thermal resistanse : Rth(j-c) [ °C/W ] FWD IGBT 0.010 0.001 0.001 0.010 0.100 1.000 Pulse width : Pw [ sec ] MS5F5925 11 13 H04-004-03a Warnings - This product shall be used within its absolute maximum rating (voltage, current, and temperature).　This product may be broken in case of using beyond the ratings. 製品の絶対最大定格（電圧，電流，温度等）の範囲内で御使用下さい。絶対最大定格を超えて使用すると、素子が破壊する 場合があります。 - Connect adequate fuse or protector of circuit between three-phase line and this product to prevent the equipment from causing secondary destruction, such as fire, its spreading, or explosion. 万一の不慮の事故で素子が破壊した場合を考慮し、商用電源と本製品の間に適切な容量のヒューズ又はブレーカーを必ず 付けて火災，爆発，延焼等の２次破壊を防いでください。 - Use this product after realizing enough working on environment and considering of product's reliability life. This product may be broken before target life of the system in case of using beyond the product's reliability life. 製品の使用環境を十分に把握し、製品の信頼性寿命が満足できるか検討の上、本製品を適用して下さい。製品の信頼性寿命 を超えて使用した場合、装置の目標寿命より前に素子が破壊する場合があります。 - If the product had been used in the environment with acid, organic matter, and corrosive gas ( hydrogen sulfide, sulfurous acid gas), the product's performance and appearance can not be ensured easily. 酸・有機物・腐食性ガス（硫化水素，亜硫酸ガス等）を含む環境下で使用された場合、製品機能・外観等の保証はできません。 - Use this product within the power cycle curve (Technical Rep.No. : MT5F12959). Power cycle capability is classified to delta-Tj mode which is stated as above and delta-Tc mode. Delta-Tc mode is due to rise and down of case temperature (Tc), and depends on cooling design of equipment which use this product. In application which has such frequent rise and down of Tc, well consideration of product life time is necessary. 本製品は、パワーサイクル寿命カーブ以下で使用下さい(技術資料No.: MT5F12959)。パワーサイクル耐量にはこのΔTjによる 場合の他に、ΔTcによる場合があります。これはケース温度(Tc)の上昇下降による熱ストレスであり、本製品をご使用する際 の放熱設計に依存します。ケース温度の上昇下降が頻繁に起こる場合は、製品寿命に十分留意してご使用下さい。 - Never add mechanical stress to deform the main or control terminal. The deformed terminal may cause poor contact problem. 主端子及び制御端子に応力を与えて変形させないで下さい。　端子の変形により、接触不良などを引き起こす場合があります。 - Use this product with keeping the cooling fin's flatness between screw holes within 100um at 100mm and the roughness within 10um. Also keep the tightening torque within the limits of this specification. Too large convex of cooling fin may cause isolation breakdown and this may lead to a critical accident. On the other hand, too large concave of cooling fin makes gap between this product and the fin bigger, then, thermal conductivity will be worse and over heat destruction may occur. 冷却フィンはネジ取り付け位置間で平坦度を100mmで100um以下、表面の粗さは10um以下にして下さい。　過大な凸反り があったりすると本製品が絶縁破壊を起こし、重大事故に発展する場合があります。また、過大な凹反りやゆがみ等があると、 本製品と冷却フィンの間に空隙が生じて放熱が悪くなり、熱破壊に繋がることがあります。 - In case of mounting this product on cooling fin, use thermal compound to secure thermal conductivity. If the thermal compound amount was not enough or its applying method was not suitable, its spreading will not be enough, then, thermal conductivity will be worse and thermal run away destruction may occur. Confirm spreading state of the thermal compound when its applying to this product. (Spreading state of the thermal compound can be confirmed by removing this product after mounting.) 素子を冷却フィンに取り付ける際には、熱伝導を確保するためのコンパウンド等をご使用ください。又、塗布量が不足したり、 塗布方法が不適だったりすると、コンパウンドが十分に素子全体に広がらず、放熱悪化による熱破壊に繋がる事があります。 コンパウンドを塗布する際には、製品全面にコンパウンドが広がっている事を確認してください。 (実装した後に素子を取りはずすとコンパウンドの広がり具合を確認する事が出来ます。) - It shall be confirmed that IGBT's operating locus of the turn-off voltage and current are within the RBSOA specification. This product may be broken if the locus is out of the RBSOA. ターンオフ電圧・電流の動作軌跡がRBSOA仕様内にあることを確認して下さい。RBSOAの範囲を超えて使用すると素子が破壊 する可能性があります。 - If excessive static electricity is applied to the control terminals, the devices may be broken. Implement some countermeasures against static electricity. 制御端子に過大な静電気が印加された場合、素子が破壊する場合があります。取り扱い時は静電気対策を実施して下さい。 MS5F5925 12 13 H04-004-03a Warnings - Never add the excessive mechanical stress to the main or control terminals when the product is applied to equipments. The module structure may be broken. 素子を装置に実装する際に、主端子や制御端子に過大な応力を与えないで下さい。端子構造が破壊する可能性があります。 - In case of insufficient -VGE, erroneous turn-on of IGBT may occur. -VGE shall be set enough value to prevent this malfunction. (Recommended value : -VGE = -15V) 逆バイアスゲート電圧-VGEが不足しますと誤点弧を起こす可能性があります。誤点弧を起こさない為に-VGEは十分な値で 設定して下さい。　（推奨値 : -VGE = -15V) - In case of higher turn-on dv/dt of IGBT, erroneous turn-on of opposite arm IGBT may occur. Use this product in the most suitable drive conditions, such as +VGE, -VGE, RG to prevent the malfunction. ターンオン dv/dt が高いと対抗アームのＩＧＢＴが誤点弧を起こす可能性があります。誤点弧を起こさない為の最適なドライブ 条件（+VGE, -VGE, RG等）でご使用下さい。 - This product may be broken by avalanche in case of VCE beyond maximum rating VCES is applied between C-E terminals. Use this product within its absolute maximum voltage. VCESを超えた電圧が印加された場合、アバランシェを起こして素子破壊する場合があります。VCEは必ず絶対定格の範囲内 でご使用下さい。 Cautions - Fuji Electric Device Technology is constantly making every endeavor to improve the product quality and reliability. However, semiconductor products may rarely happen to fail or malfunction. To prevent accidents causing injury or death, damage to property like by fire, and other social damage resulted from a failure or malfunction of the Fuji Electric Device Technology semiconductor products, take some measures to keep safety such as redundant design, spread-fire-preventive design, and malfunction-protective design. 富士電機デバイステクノロジーは絶えず製品の品質と信頼性の向上に努めています。しかし、半導体製品は故障が発生したり、 誤動作する場合があります。富士電機デバイステクノロジー製半導体製品の故障または誤動作が、結果として人身事故・火災 等による財産に対する損害や社会的な損害を起こさないように冗長設計・延焼防止設計・誤動作防止設計など安全確保 のための手段を講じて下さい。 - The application examples described in this specification only explain typical ones that used the Fuji Electric Device Technology products. This specification never ensure to enforce the industrial property and other rights, nor license the enforcement rights. 本仕様書に記載してある応用例は、富士電機デバイステクノロジー製品を使用した代表的な応用例を説明するものであり、 本仕様書によって工業所有権、その他権利の実施に対する保障または実施権の許諾を行うものではありません。 - The product described in this specification is not designed nor made for being applied to the equipment or systems used under life-threatening situations. When you consider applying the product of this specification to particular used, such as vehicle-mounted units, shipboard equipment, aerospace equipment, medical devices, atomic control systems and submarine relaying equipment or systems,　please apply after confirmation of this product to be satisfied about system construction and required reliability. 本仕様書に記載された製品は、人命にかかわるような状況下で使用される機器あるいはシステムに用いられることを 目的として設計・製造されたものではありません。本仕様書の製品を車両機器、船舶、航空宇宙、医療機器、原子力 制御、海底中継機器あるいはシステムなど、特殊用途へのご利用をご検討の際は、システム構成及び要求品質に 満足することをご確認の上、ご利用下さい。 If there is any unclear matter in this specification, please contact Fuji Electric Device Technology Co.,Ltd. MS5F5925 13 13 H04-004-03a