FTR-H3_10

FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series n FEATURES l l l l l l l l l l l Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape spring. Noise level ≈ 50dB at 5cm. Low profile (height 18.8 mm) / cadmium free contacts High insulation in small package Insulation distance : 8 mm (between coil and contacts) Dielectric strength : 5,000 VAC Surge strength :10,000 V Electric life of 100,000 operations at rated load (10A, 250VAC, cos Phi 1). TV-5 / TV-8 standard version. Low coil power (530mW) UL (conforms to UL508, 873), CSA (conforms to CSA22.2 No.14), VDE (conforms to VDE 0435, 0631, 0700, 0860) Conforms to FIMKO, DEMKO Sealed type relay, RT III Complies with TV-5 / TV-8 Inrush 78A (TV-5) / 120A (TV-8) RoHS compliant Please see page 6 for more information n PARTNUMBER INFORMATION [Example] (a) (b) (c) (d) (e) FTR-H3 (a) A (b) A (c) 012 (d) V (e) FTR-H3: FTR-H3 Series A K 012 V T : 1 form A (SPST-NO) : Standard type (530mW) : 5.....24VDC Coil rating table at page 3 : Silver tin oxide + TV-5 rating : Silver tin oxide + TV-8 rating Relay type Contact configuration Coil type Coil rated voltage Contact material / TV type Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-H3AA012V Actual marking: H3AA012V 1 FTR-H3 SERIES FTR-K1 SERIES n SPECIFICATION Item Contact Data Configuration Construction Material Resistance (initial) Contact rating Max. carrying current *¹ Max. switching voltage Max. switching power Min. switching load *² Max. inrush current Life Mechanical AC resistive Electrical Coil Data Rated power Operate power Operating temperature range Timing Data Insulation Operate Release Resistance (initial) Dielectric strength Surge strength Clearance Creepage EN61810-1, VDE0435 Voltage Pollution degree Material group Category Other Vibration Resistance Shock Weight Average sound pressure Sealing Endurance Endurance Open contacts Contacts to coil Coil to contacts DC resistive Lamp load FTR-H3 AA ( ) V 1 form A (SPST-NO) Single Silver tin oxide (movable: gold plated) Max. 100mOhm at 6VDC, 1A 10A, 250VAC / 30VDC 14A 400VAC / 300 VDC 2,500VA / 300W 10mA, 5VDC 78A / 120VAC 120A / 240VAC 20 x 106 operations minimum 100 x 103 operations minimum 100 x 103 operations minimum TV-5 530mW 260mW -40 °C to +75 °C (no frost) Max. 10ms (no diode, without bounce) Max. 5ms (no diode, without bounce) Min. 1,000MOhm at 500VDC 1,000VAC (50/60Hz) 1min 5,000VAC (50/60Hz) 1min 10,000V / 1.2 x 50µs standard wave 8mm 8mm 250V 2 III a B / 250V 10 to 55Hz double amplitude 3.3mm Min. 1,000m/s² (6 ± 1ms) Approximately 12g Approximately 50dB at 5cm Sealed, RT III TV-8 FTR-H3 AA ( ) T Misoperation>1us 10 to 55Hz double amplitude 1.65mm Misoperation>1us Min. 100m/s² (11 ± 1ms) * 1 When maximum carrying current is more than 10A, PCB layout needs to be considered. * 2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels. 2 FTR-K1 SERIES FTR-H3 SERIES n COIL RATING Coil Code 005 009 012 024 Rated Coil Voltage (VDC) 5 9 12 24 Coil Resistance +/- 10% (Ohm) 47 155 270 1,100 Must Operate Voltage (VDC) * 3.5 6.3 8.4 16.8 Must ReleaseMax. Coil Voltage Voltage (VDC) (VDC) * 0.5 0.9 1.2 2.2 8.2 9.9 19.8 39.6 530 Rated Power (mW) Note: All values in the table are valid for 20°C and zero contact current. * Specified operate values are valid for pulse wave voltage. n SAFETY STANDARDS Type UL Compliance UL 508 E63614 CSA C22.2 No. 14 LR 40304 Contact rating Flammability: UL 94-V0 (plastics) 10A, 30 VDC/ 277 VAC (resistive) 1/3 HP, 125VAC 1/2 HP, 250VAC TV-5, 120VAC TV-8, 120VAC/240VAC (T type) Pilot duty: B300, Q300 (T type) 10A, 250 VAC (cosφ=1) 3A, 250 VAC (cosφ=0.4) 10A, 30 VDC (0ms) 5/80A, 250 VAC (V-type) 30k 8/120A, 250VAC (T type) 30k VDE 0435, 0860, 0700, 0631 40015008 Complies with CQC 3 FTR-K1 SERIES FTR-H3 SERIES n CHARACTERISTIC DATA n REFERENCE DATA 4 FTR-K1 SERIES FTR-H3 SERIES n DIMENSIONS l Dimensions l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) Unit: mm 5 FTR-K1 SERIES FTR-H3 SERIES RoHS Compliance and Lead Free Information 1. General Information l l l l All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including amendments. Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005. (Amendment to Directive 2002/95/EC) All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. 2. Recommended Lead Free Solder Profile l Recommended solder Sn-3.0Ag-0.5Cu. Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 4. Tin Whiskers l 6 FTR-K1 SERIES FTR-H3 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. July 21, 2010 7