FTR-P4CN012W1-01

FTR-P4 SERIES COMPACT POWER TWIN RELAY 1POLE X 2, H-BRIDGE— 25 A FOR AUTOMOTIVE APPLICATIONS FTR-P4 Series l Compact for high density packaging. (60% volume of previous generation FBR52). l High contact capacity with proven contact material. (00,000 operations, 4 V, 25 A achieved, even with reduced size). l Coil power savings (600mW nominal achieved with state-of-the-art magnetic analysis/design). l 125˚C version is available. l Ease of PCB layout (all terminals on perimeter, coil and contact terminals separated). l Pin compatible with low acoustic noise relay, FTR-P2. l Optional over-voltage circuit breaking capability (0.6mm gap, contact our representative). l Packaging for auto-insertion (tube packing, 30 relays/tube). l RoHS compliant n FEATURES RoHS compliant since date code: 0624 Please see page 8 for more information n ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (f) FTR-P4 C N 02 W *** (a) (b) (c) (d) (e) (f) Series Name Contact Arrangement Contact Gap Nominal Coil Voltage Contact Material Custom Designation FTR-P4 Series C N P 009 00 02 W :  Form C x 2 (H-Bridge) : 0.3mm gap : 0.6mm gap : 9VDC : 0VDC : 2VDC : Silver-tin oxide-indium Nil : Standard (85˚C) -01 : High temperature (125˚C) Note: The part number stamped on the relay cover does not include "FTR". Example: Ordering part number: FTR-P4CN02W Stamped on part number: P4CN02W n TYPICAL APPLICATIONS Power seat Sun roof Tilt steering Retractable antenna  Power window Door lock FTR-P4 SERIES n SPECIFICATIONS Item Arrangement Material Voltage Drop (Resistance) Rating Contact Maximum Carrying Current Maximum Inrush Current (Reference) Maximum Switching Current (Reference) Specification Standard 1 form C x 2 (H-Bridge ) Silver-tin oxide-indiu m Maximum 100 mV (at 1 A 12 VDC) 25 A at 14 VDC (locked motor load) 25 A / 1 hour (20° C, 100% rated coil voltage) 35 A 35 A at 16 VDC High Temperature versio n Minimum Switching Load*1 (Reference) 1 A, 6 VD C Operating Temperature Range Coil Storage Temperature Range Operate (at nominal voltage) Release (at nominal voltage) Mechanical Life Electrical Vibration Resistance Shock Resistance Operational Operational Endurance -40° C to +85° C (no frost ) -40° C to +125° C (no frost ) -40° C to+100° C (no frost) -40° C to +125° C (no frost) Timing Values Maximum 10ms (not including bounce) Maximum 5ms (not including bounce, no diode) Maximum 15ms (not including bounce, with diode) 10 x 1 06 operations minimum 100 x 103 operations minimum 14 VDC, 25 A (locked motor load) (1 operation = 1 forward, 1 reverse) 10-55Hz, 1.5mm double amplitude (=9.13G @ 55Hz) 55-100Hz, 45m/sec2 (4.6G) 100 m/ s2 minimum (10G) 1, 000 m/ s2 minimum (100G) 100M ohms @500 VA C 500 VA C Approximately 9.0 g Other Insulation Resistance (initial) Dielectric Withstanding Voltage (initial) Weight * Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operating environment. 2 FTR-P4 SERIES n COIL DATA CHART FTR-P4 Series (0.25mm contact gap) Model Nominal Coil Coil Resistance Voltage (±0% at 20°C) 9VDC 0VDC 2VDC 135Ω 167Ω 240Ω Must Operate Voltage 5.5VDC (at 20ºC) 6.9VDC (at 85ºC) 6.3VDC (at 20ºC) 7.9VDC (at 85ºC) 7.3VDC (at 20ºC) 9.2VDC (at 85ºC) Must Coil Thermal Release Power at Resistance Voltage Nominal (approx.) (at 20°C) Voltage 0.75VDC 0.9VDC .0VDC 0.6W 0.6W 0.6W 73ºC/W 73ºC/W 73ºC/W FTR-P4-CN009W ( ) FTR-P4-CN00W ( ) FTR-P4-CN02W ( ) Note: ( ) is "Nil" or "-0" FTR-P4 Series (0.6mm contact gap) Model Nominal Coil Voltage 9VDC 0VDC 2VDC Coil Resistance (±0% at 20°C) 100Ω 125Ω 167Ω Must Operate Voltage 5.5VDC (at 20ºC) 6.9VDC (at 85ºC) 6.3VDC (at 20ºC) 7.9VDC (at 85ºC) 7.3VDC (at 20ºC) 9.2VDC (at 85ºC) Must Release Voltage (at 20°C) 0.75VDC 0.9VDC .0VDC Coil Thermal Power at Resistance Nominal (approx.) Voltage 0.8W 0.8W 0.8W 73ºC/W 73ºC/W 73ºC/W FTR-P4-CP009W FTR-P4-CP00W FTR-P4-CP02W 3 FTR-P4 SERIES n CHARACTERISTIC DATA 1. LIFE TEST (EXAMPLES) • Test item 4 V DC-25 A locked motor 00K operations* minimim 0.25 seconds ON, 9.75 seconds OFF • Change of operate and release voltage Percent of nominal coil voltage (%) 100 80 60 40 20 0 OPERATE M RELEASE 20 50 100 500 1000 • Current wave form (RL-1) 25 A 0A (RL-2) 25 A 0A 0.25 sec 0.25 sec 5 sec 10 sec Initial • Change in contact resistance Contact Resistance (mΩ) Number of operations* (x 103 times) (Measured at 6 VDC, 1A wet) 1000 100 10 * 1 operation = 1 forward and 1 reverse 1 20 50 Initial Number of operations* (x 103 times) 100 500 1000 4 FTR-P4 SERIES 2. MAXIMUM BREAK CAPACITY 50 40 35 30 25 20 5 2 0 FTR-P4CN FTR-P4CP Motor load lock 3. COIL TEMPERATURE RISE 120 Ambient temperature: 20C 0.6 W Coil temperature rise (degrees C) Switching current (A) 100 80 60 40 20 0 Contact carrying current: 20A Contact carrying current: 10A Contact carrying current: 0.0A 0.6 W 0.6 W 0 5 20 25 30 35 40 50 0 10 20 30 Source voltage (VDC) Applied time (minutes) 4. OPERATING COIL VOLTAGE RANGE Ratio of coil voltage to nominal voltage (%) 140 120 Continuous operating range at 10A carry current 100 80 60 40 -30 -20 Must 0 ate v -oper oltag e 20 40 60 80 100 Ambient temperature C 5 FTR-P4 SERIES 5. VIBRATION RESISTANCE CHARACTERISTIC 100 5 Dual amplitude (mm) 1 0.5 0.1 0.01 Frequency : 10~2000 Hz Acceleration : 100 m/s2 maximum Vibration direction : see drawing below Detection level : generation of 1 ms or longer contact opening Acceleration 50 44 m/s2 On vehicle Electronic equipment Standard 10 10 50 100 Frequency (Hz) 500 Range where chattering occurs Break contact Coil deenergized on X-axis Z FTR-P4 Y X 1000 2000 6. SHOCK RESISTANCE CHARACTERISTIC 1,000 800 600 Shock duration: 111 ms, half-sine wave Test condition: coil, energized and de-energized Impact direction: see drawing below Detection level : generation of 1ms or longer contact opening Y2 Y1 Z2 FTR-P4 Z1 X1 X2 Y1 Y2 Impact direction Z1 Z2 : Break contact (coil de-energized) : Make contact (coil energized) X1 X2 Shock level (m/s2) 400 200 0 n REFERENCE DATA 100 Operating/release voltage distribution Data: FTR-P4 Units: n = 100 Operate Release 100 Operate and release time distribution Data: FTR-P4 Units: n = 100 Operate Release 100 Contact resistance distribution Data: FTR-P4 Units: n = 100 80 80 80 Distribution (%) Distribution (%) Distribution (%) 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 60 60 60 40 40 40 20 20 20 0 0 0 10 20 30 40 50 60 70 80 0 0 10 20 30 40 50 60 70 80 Ratio to rated voltage (%) Time (ms) Contact resistance (m) 6 FTR-P4 SERIES n DIMENSIONS AND SCHEMATICS Dimensions Recommended PCB hole layout and schematic (Bottom view) 7-ø1.5 P4CN012W1 17.4+0.5 14.2+0.5 (1.2) 5 5 5 13.5+0.5 3.5+0.5 0.4 5.0 5.0 5.0 3-0.8 6.0 6.0 6 F&T 6 Unit: mm 3-0.25 4-1.0 4-0.4 n PRECAUTIONS Please refer to the Engineering Reference in our relay databook for general precautions. 7 FTR-P4 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 2, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. 4. Tin Whisker l 8 FTR-P4 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4 8630, Japan Tel: (8-3) 5449-700 Fax: (8-3) 5449-2626 Email: promothq@fcl.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (-408) 745-4900 Fax: (-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 232 WV Hoofddorp Netherlands Tel: (3-23) 556090 Fax: (3-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 02E Pasir Panjang Road #0-0 Citilink Warehouse Complex Singapore 8529 Tel: (65) 6375-8560 Fax: (65) 6273-302 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. March 4, 2009. 9